On Thu, 28 Mar 2013 10:42:01 +0100
Daniel Vetter <daniel.vet...@ffwll.ch> wrote:
> Now we can ditch the checks in the Haswell disable code.
>
> v2: add support for Haswell
>
> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 34 +++++++++++++++++++++++++---------
> 1 file changed, 25 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index a5adaa0..c9e873e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2975,11 +2975,6 @@ static void intel_crtc_wait_for_pending_flips(struct
> drm_crtc *crtc)
> mutex_unlock(&dev->struct_mutex);
> }
>
> -static bool haswell_crtc_driving_pch(struct drm_crtc *crtc)
> -{
> - return intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG);
> -}
> -
> /* Program iCLKIP clock to the desired frequency */
> static void lpt_program_iclkip(struct drm_crtc *crtc)
> {
> @@ -3562,13 +3557,10 @@ static void haswell_crtc_disable(struct drm_crtc
> *crtc)
> int pipe = intel_crtc->pipe;
> int plane = intel_crtc->plane;
> enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
> - bool is_pch_port;
>
> if (!intel_crtc->active)
> return;
>
> - is_pch_port = haswell_crtc_driving_pch(crtc);
> -
> for_each_encoder_on_crtc(dev, crtc, encoder)
> encoder->disable(encoder);
>
> @@ -3595,7 +3587,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
> if (encoder->post_disable)
> encoder->post_disable(encoder);
>
> - if (is_pch_port) {
> + if (intel_crtc->config.has_pch_encoder) {
> lpt_disable_pch_transcoder(dev_priv);
> intel_ddi_fdi_disable(crtc);
> }
> @@ -5635,6 +5627,9 @@ static bool ironlake_get_pipe_config(struct intel_crtc
> *crtc,
> if (!(tmp & PIPECONF_ENABLE))
> return false;
>
> + if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE)
> + pipe_config->has_pch_encoder = true;
> +
> return true;
> }
>
> @@ -5763,6 +5758,17 @@ static bool haswell_get_pipe_config(struct intel_crtc
> *crtc,
> if (!(tmp & PIPECONF_ENABLE))
> return false;
>
> + /*
> + * aswell has only FDI/PCH transcoder A. It is which is connected to
> + * DDI E. So just check whether this pipe is wired to DDI E and whether
> + * the PCH transcoder is on.
> + */
> + tmp = I915_READ(TRANS_DDI_FUNC_CTL(crtc->pipe));
> + if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
> + I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE)
> + pipe_config->has_pch_encoder = true;
> +
> +
> return true;
> }
>
> @@ -7692,6 +7698,14 @@ static bool
> intel_pipe_config_compare(struct intel_crtc_config *current_config,
> struct intel_crtc_config *pipe_config)
> {
> + if (current_config->has_pch_encoder != pipe_config->has_pch_encoder) {
> + DRM_ERROR("mismatch in has_pch_encoder "
> + "(expected %i, found %i)\n",
> + current_config->has_pch_encoder,
> + pipe_config->has_pch_encoder);
> + return false;
> + }
> +
> return true;
> }
>
> @@ -7791,6 +7805,7 @@ intel_modeset_check_state(struct drm_device *dev)
> "crtc's computed enabled state doesn't match tracked
> enabled state "
> "(expected %i, found %i)\n", enabled, crtc->base.enabled);
>
> + memset(&pipe_config, 0, sizeof(pipe_config));
> active = dev_priv->display.get_pipe_config(crtc,
> &pipe_config);
> WARN(crtc->active != active,
> @@ -9155,6 +9170,7 @@ void intel_modeset_setup_hw_state(struct drm_device
> *dev,
> setup_pipes:
> list_for_each_entry(crtc, &dev->mode_config.crtc_list,
> base.head) {
> + memset(&crtc->config, 0, sizeof(crtc->config));
> crtc->active = dev_priv->display.get_pipe_config(crtc,
> &crtc->config);
>
I think this is correct; I was worried about mode_set, crtc_disable,
crtc_enable. But in that case, the pipe_config shouldn't be overridden
(that won't happen until the next mode_set). So I think this is safe.
Reviewed-by: Jesse Barnes <jbar...@virtuousgeek.org>
--
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
