On Thu, 28 Mar 2013 10:41:59 +0100
Daniel Vetter <daniel.vet...@ffwll.ch> wrote:
> The only exception left is is_cpu_edp in the haswell modeset code.
> We need that to assign the cpu transcoder, but we might want to
> move that eventually into the encoder, too.
>
> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 37
> +++++++-----------------------------
> 1 file changed, 7 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 464eb90..e925efe 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4532,7 +4532,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> intel_clock_t clock, reduced_clock;
> u32 dspcntr, pipeconf;
> bool ok, has_reduced_clock = false, is_sdvo = false;
> - bool is_lvds = false, is_tv = false, is_dp = false;
> + bool is_lvds = false, is_tv = false;
> struct intel_encoder *encoder;
> const intel_limit_t *limit;
> int ret;
> @@ -4551,9 +4551,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> case INTEL_OUTPUT_TVOUT:
> is_tv = true;
> break;
> - case INTEL_OUTPUT_DISPLAYPORT:
> - is_dp = true;
> - break;
> }
>
> num_connectors++;
> @@ -4636,7 +4633,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
>
> /* default to 8bpc */
> pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
> - if (is_dp) {
> + if (intel_crtc->config.has_dp_encoder) {
> if (intel_crtc->config.dither) {
> pipeconf |= PIPECONF_6BPC |
> PIPECONF_DITHER_EN |
> @@ -5397,7 +5394,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc
> *intel_crtc,
> uint32_t dpll;
> int factor, num_connectors = 0;
> bool is_lvds = false, is_sdvo = false, is_tv = false;
> - bool is_dp = false, is_cpu_edp = false;
>
> for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
> switch (intel_encoder->type) {
> @@ -5413,14 +5409,6 @@ static uint32_t ironlake_compute_dpll(struct
> intel_crtc *intel_crtc,
> case INTEL_OUTPUT_TVOUT:
> is_tv = true;
> break;
> - case INTEL_OUTPUT_DISPLAYPORT:
> - is_dp = true;
> - break;
> - case INTEL_OUTPUT_EDP:
> - is_dp = true;
> - if (!intel_encoder_is_pch_edp(&intel_encoder->base))
> - is_cpu_edp = true;
> - break;
> }
>
> num_connectors++;
> @@ -5452,7 +5440,8 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc
> *intel_crtc,
> }
> dpll |= DPLL_DVO_HIGH_SPEED;
> }
> - if (is_dp && !is_cpu_edp)
> + if (intel_crtc->config.has_dp_encoder &&
> + intel_crtc->config.has_pch_encoder)
> dpll |= DPLL_DVO_HIGH_SPEED;
>
> /* compute bitmask from p1 value */
> @@ -5505,7 +5494,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> intel_clock_t clock, reduced_clock;
> u32 dpll, fp = 0, fp2 = 0;
> bool ok, has_reduced_clock = false;
> - bool is_lvds = false, is_dp = false, is_cpu_edp = false;
> + bool is_lvds = false;
> struct intel_encoder *encoder;
> int ret;
> bool dither, fdi_config_ok;
> @@ -5515,14 +5504,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc
> *crtc,
> case INTEL_OUTPUT_LVDS:
> is_lvds = true;
> break;
> - case INTEL_OUTPUT_DISPLAYPORT:
> - is_dp = true;
> - break;
> - case INTEL_OUTPUT_EDP:
> - is_dp = true;
> - if (!intel_encoder_is_pch_edp(&encoder->base))
> - is_cpu_edp = true;
> - break;
> }
>
> num_connectors++;
> @@ -5559,7 +5540,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> drm_mode_debug_printmodeline(mode);
>
> /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
> - if (!is_cpu_edp) {
> + if (intel_crtc->config.has_pch_encoder) {
> struct intel_pch_pll *pll;
>
> pll = intel_get_pch_pll(intel_crtc, dpll, fp);
> @@ -5672,18 +5653,14 @@ static int haswell_crtc_mode_set(struct drm_crtc
> *crtc,
> int pipe = intel_crtc->pipe;
> int plane = intel_crtc->plane;
> int num_connectors = 0;
> - bool is_dp = false, is_cpu_edp = false;
> + bool is_cpu_edp = false;
> struct intel_encoder *encoder;
> int ret;
> bool dither;
>
> for_each_encoder_on_crtc(dev, crtc, encoder) {
> switch (encoder->type) {
> - case INTEL_OUTPUT_DISPLAYPORT:
> - is_dp = true;
> - break;
> case INTEL_OUTPUT_EDP:
> - is_dp = true;
> if (!intel_encoder_is_pch_edp(&encoder->base))
> is_cpu_edp = true;
> break;
\o/-by: Jesse Barnes <jbar...@virtuousgeek.org>
Untangling that stuff for ILK-IVB was a pain, glad to see it go.
--
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
