On Mon, 02 Jul 2018, "Chauhan, Madhav" <madhav.chau...@intel.com> wrote:
>> -----Original Message-----
>> From: Nikula, Jani
>> Sent: Monday, July 2, 2018 3:27 PM
>> To: Chauhan, Madhav <madhav.chau...@intel.com>; intel-
>> g...@lists.freedesktop.org
>> Cc: Zanoni, Paulo R <paulo.r.zan...@intel.com>; Shankar, Uma
>> <uma.shan...@intel.com>; Vivi, Rodrigo <rodrigo.v...@intel.com>;
>> Chauhan, Madhav <madhav.chau...@intel.com>
>> Subject: Re: [PATCH 04/20] drm/i915/icl: Enable DSI IO power
>>
>> On Fri, 15 Jun 2018, Madhav Chauhan <madhav.chau...@intel.com> wrote:
>> > This patch configures mode of operation for DSI and enable DDI IO
>> > power by configuring power well.
>> >
>> > Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
>> > ---
>> > drivers/gpu/drm/i915/intel_dsi_new.c | 22 ++++++++++++++++++++++
>> > 1 file changed, 22 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/i915/intel_dsi_new.c
>> > b/drivers/gpu/drm/i915/intel_dsi_new.c
>> > index 0d325ca..5ec4016 100644
>> > --- a/drivers/gpu/drm/i915/intel_dsi_new.c
>> > +++ b/drivers/gpu/drm/i915/intel_dsi_new.c
>> > @@ -55,11 +55,33 @@ static void gen11_dsi_program_esc_clk_div(struct
>> intel_encoder *encoder)
>> > }
>> > }
>> >
>> > +static void gen11_dsi_enable_io_power(struct intel_encoder *encoder)
>> > +{
>> > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> > + enum port port;
>> > + u32 tmp;
>> > +
>> > + for_each_dsi_port(port, intel_dsi->ports) {
>> > + tmp = I915_READ(ICL_DSI_IO_MODECTL(port));
>> > + tmp |= COMBO_PHY_MODE_DSI;
>> > + I915_WRITE(ICL_DSI_IO_MODECTL(port), tmp);
>> > + }
>> > +
>> > + intel_display_power_get(dev_priv,
>> POWER_DOMAIN_PORT_DDI_A_IO);
>> > +
>> > + if (intel_dsi->dual_link)
>> > + intel_display_power_get(dev_priv,
>> POWER_DOMAIN_PORT_DDI_B_IO);
>>
>> Per bspec, "DSI0 uses DDI A; DSI1 uses DDI B" so shouldn't this be a
>> for_each_dsi_port() too, with the appropriate mapping to power domain?
>
> Do you mean something like this:
>
> enum intel_display_power_domain power_domain;
> for_each_dsi_port()
> {
> if (port ==PORT_A)
> power_domain = POWER_DOMAIN_PORT_DDI_A_IO;
> else if( port == PORT_B)
> power_domain = POWER_DOMAIN_PORT_DDI_A_IO;
>
> intel_display_power_get(dev_priv, power_domain);
> }
That's my understanding of the spec, yes. Maybe simply:
for_each_dsi_port() {
intel_display_power_get(port == PORT_A ?
POWER_DOMAIN_PORT_DDI_A_IO :
POWER_DOMAIN_PORT_DDI_B_IO)
}
BR,
Jani.
>
>>
>> > +}
>> > +
>> > static void __attribute__((unused)) gen11_dsi_pre_enable(
>> > struct intel_encoder *encoder,
>> > const struct intel_crtc_state *pipe_config,
>> > const struct drm_connector_state
>> *conn_state)
>>
>> Please don't end lines in (. You can add a newline before the function
>> name:
>>
>> static void __attribute__((unused))
>> gen11_dsi_pre_enable(struct intel_encoder *encoder,
>> const struct intel_crtc_state *pipe_config,
>> const struct drm_connector_state *conn_state)
>>
>
> Got it. Thanks!!
>
> Regards,
> Madhav
>
>> > {
>> > + /* step2: enable IO power */
>> > + gen11_dsi_enable_io_power(encoder);
>> > +
>> > /* step3: enable DSI PLL */
>> > gen11_dsi_program_esc_clk_div(encoder);
>> > }
>>
>> --
>> Jani Nikula, Intel Open Source Graphics Center
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
