> -----Original Message-----
> From: Nikula, Jani
> Sent: Friday, June 29, 2018 7:24 PM
> To: Chauhan, Madhav <madhav.chau...@intel.com>; intel-
> g...@lists.freedesktop.org
> Cc: Zanoni, Paulo R <paulo.r.zan...@intel.com>; Shankar, Uma
> <uma.shan...@intel.com>; Vivi, Rodrigo <rodrigo.v...@intel.com>;
> Chauhan, Madhav <madhav.chau...@intel.com>
> Subject: Re: [PATCH 05/20] drm/i915/icl: Define PORT_CL_DW_10 register
>
> On Fri, 15 Jun 2018, Madhav Chauhan <madhav.chau...@intel.com> wrote:
> > This register used to power down individual lanes for DDI/DSI ports.
> > Bitfields to power up/down various combinations of lanes are also
> > added in this patch.
> >
> > Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h index 0d268d1..1b91e73 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1666,6 +1666,25 @@ enum i915_power_well_id {
> > #define ICL_PORT_CL_DW5(port) _MMIO_PORT(port,
> _ICL_PORT_CL_DW5_A, \
> > _ICL_PORT_CL_DW5_B)
> >
> > +#define _CNL_PORT_CL_DW10_A 0x162028
> > +#define _ICL_PORT_CL_DW10_B 0x6c028
> > +#define ICL_PORT_CL_DW10(port) _MMIO_PORT(port, \
> > + _CNL_PORT_CL_DW10_A, \
> > + _ICL_PORT_CL_DW10_B)
> > +#define PG_SEQ_DELAY_OVRRIDE (3 << 25)
>
> _OVERRIDE_MASK?
Ok. Will add it.
>
> > +#define PG_SEQ_DELAY_OVRRIDE_ENABLE (1 << 24)
>
> OVERRIDE
Ok.
>
> > +#define PWR_UP_ALL_LANES 0x0
> > +#define PWR_DOWN_LN_3_2_1 0xe
> > +#define PWR_DOWN_LN_3_2 0xc
> > +#define PWR_DOWN_LN_3 0x8
> > +#define PWR_DOWN_LN_2_1_0 0x7
> > +#define PWR_DOWN_LN_1_0 0x3
> > +#define PWR_DOWN_LN_1 0x2
> > +#define PWR_DOWN_LN_3_1 0xa
> > +#define PWR_DOWN_LN_3_1_0 0xb
>
> We define the values of fields shifted to position, so they can be directly
> OR'd
> in place.
>
> Effectively you could do this:
>
> #define PWR_UP_LANES(x) (GENMASK(3, x) << 4)
> #define PWR_UP_LANES_REVERSE(x) (GENMASK(3 - (x), 0) << 4)
>
> and use them like PWR_UP_LANES(intel_dsi->lane_count), saving tens of
> lines of code.
IIUC, we can directly use these macros instead of switch case in code.
But using PWR_UP_LANES(2) will give 0xC but needed 0xA for DSI.
Or are you suggesting something else??
Regards,
Madhav
>
> BR,
> Jani.
>
> > +#define PWR_DOWN_LN_MASK 0xf0
> > +#define PWR_DOWN_LN_SHIFT 4
> > +
> > #define _PORT_CL1CM_DW9_A 0x162024
> > #define _PORT_CL1CM_DW9_BC 0x6C024
> > #define IREF0RC_OFFSET_SHIFT 8
>
> --
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
