From: Paulo Zanoni <paulo.r.zan...@intel.com>
Version 2: call intel_set_pipe_timings from both i9xx_crtc_mode_set
and ironlake_crtc_mode_set, instead of just ironlake, as requested by
Daniel Vetter.
The problem caused by calling this function from i9xx_crtc_mode_set too
is that now on i9xx we write to PIPESRC before writing to DSPSIZE and
DSPPOS. I could not find any evidence in our documentation that this
won't work, and the docs actually say the pipe registers should be set
before the plane registers.
Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 127 ++++++++++++++--------------------
1 file changed, 52 insertions(+), 75 deletions(-)
Untested on i9xx. Needs a few tested-by stamps.
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index c402774..50b58a5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4250,6 +4250,55 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
I915_WRITE(DPLL(pipe), dpll);
}
+static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t vsyncshift;
+
+ if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ /* the chip adds 2 halflines automatically */
+ adjusted_mode->crtc_vtotal -= 1;
+ adjusted_mode->crtc_vblank_end -= 1;
+ vsyncshift = adjusted_mode->crtc_hsync_start
+ - adjusted_mode->crtc_htotal / 2;
+ } else {
+ vsyncshift = 0;
+ }
+
+ if (INTEL_INFO(dev)->gen > 3)
+ I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+
+ I915_WRITE(HTOTAL(pipe),
+ (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ I915_WRITE(HBLANK(pipe),
+ (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ I915_WRITE(HSYNC(pipe),
+ (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+ I915_WRITE(VTOTAL(pipe),
+ (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ I915_WRITE(VBLANK(pipe),
+ (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ I915_WRITE(VSYNC(pipe),
+ (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+ /* pipesrc controls the size that is scaled from, which should
+ * always be the user's requested size.
+ */
+ I915_WRITE(PIPESRC(pipe),
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4263,7 +4312,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dspcntr, pipeconf, vsyncshift;
+ u32 dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false;
bool is_lvds = false, is_tv = false, is_dp = false;
struct intel_encoder *encoder;
@@ -4388,42 +4437,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
}
}
- pipeconf &= ~PIPECONF_INTERLACE_MASK;
- if (!IS_GEN2(dev) &&
- adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
- pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- vsyncshift = adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2;
- } else {
- pipeconf |= PIPECONF_PROGRESSIVE;
- vsyncshift = 0;
- }
-
- if (!IS_GEN3(dev))
- I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
-
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
@@ -4432,8 +4446,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
((mode->vdisplay - 1) << 16) |
(mode->hdisplay - 1));
I915_WRITE(DSPPOS(plane), 0);
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
I915_WRITE(PIPECONF(pipe), pipeconf);
POSTING_READ(PIPECONF(pipe));
@@ -5039,42 +5051,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
}
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- I915_WRITE(VSYNCSHIFT(pipe),
- adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2);
- } else {
- I915_WRITE(VSYNCSHIFT(pipe), 0);
- }
-
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
-
- /* pipesrc controls the size that is scaled from, which should
- * always be the user's requested size.
- */
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
ironlake_set_m_n(crtc, mode, adjusted_mode);
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
