From: Paulo Zanoni <paulo.r.zan...@intel.com>
Too many lines just to compute the value of a single variable, so
move this to its own function.
Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 165 +++++++++++++++++++++-------------
1 file changed, 105 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index ebffd99..5fb082f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4781,6 +4781,109 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
}
+static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
+ struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock, u32 fp)
+{
+ struct drm_crtc *crtc = &intel_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder;
+ uint32_t dpll;
+ int factor, pixel_multiplier, num_connectors = 0;
+ bool is_lvds = false, is_sdvo = false, is_tv = false;
+ bool is_dp = false, is_cpu_edp = false;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ switch (intel_encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ case INTEL_OUTPUT_HDMI:
+ is_sdvo = true;
+ if (intel_encoder->needs_tv_clock)
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ is_dp = true;
+ if (!intel_encoder_is_pch_edp(&intel_encoder->base))
+ is_cpu_edp = true;
+ break;
+ }
+
+ num_connectors++;
+ }
+
+ /* Enable autotuning of the PLL clock (if permissible) */
+ factor = 21;
+ if (is_lvds) {
+ if ((intel_panel_use_ssc(dev_priv) &&
+ dev_priv->lvds_ssc_freq == 100) ||
+ (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
+ factor = 25;
+ } else if (is_sdvo && is_tv)
+ factor = 20;
+
+ if (clock->m < factor * clock->n)
+ fp |= FP_CB_TUNE;
+
+ dpll = 0;
+
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ if (is_sdvo) {
+ pixel_multiplier =
intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (pixel_multiplier > 1) {
+ dpll |= (pixel_multiplier - 1) <<
PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+ }
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ }
+ if (is_dp && !is_cpu_edp)
+ dpll |= DPLL_DVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ /* also FPA1 */
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+
+ switch (clock->p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+
+ if (is_sdvo && is_tv)
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (is_tv)
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ return dpll;
+}
+
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4799,7 +4902,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
struct intel_encoder *encoder;
u32 temp;
- int ret, factor;
+ int ret;
bool dither;
bool is_cpu_edp = false, is_pch_edp = false;
@@ -4855,65 +4958,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
reduced_clock.m2;
- /* Enable autotuning of the PLL clock (if permissible) */
- factor = 21;
- if (is_lvds) {
- if ((intel_panel_use_ssc(dev_priv) &&
- dev_priv->lvds_ssc_freq == 100) ||
- (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
- factor = 25;
- } else if (is_sdvo && is_tv)
- factor = 20;
-
- if (clock.m < factor * clock.n)
- fp |= FP_CB_TUNE;
-
- dpll = 0;
-
- if (is_lvds)
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- int pixel_multiplier =
intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- dpll |= (pixel_multiplier - 1) <<
PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
- }
- dpll |= DPLL_DVO_HIGH_SPEED;
- }
- if (is_dp && !is_cpu_edp)
- dpll |= DPLL_DVO_HIGH_SPEED;
-
- /* compute bitmask from p1 value */
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- /* also FPA1 */
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
-
- switch (clock.p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
-
- if (is_sdvo && is_tv)
- dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (is_tv)
- /* XXX: just matching BIOS for now */
- /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
- else
- dpll |= PLL_REF_INPUT_DREFCLK;
+ dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
