On Thu, Oct 19, 2017 at 10:48:04AM +0000, Ville Syrjälä wrote:
> On Wed, Oct 18, 2017 at 02:50:59PM -0700, Rodrigo Vivi wrote:
> > On Wed, Oct 18, 2017 at 08:48:24PM +0000, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > >
> > > Track the system agent voltage we request from pcode in the cdclk state
> > > on CNL. Annoyingly we can't actually read out the current value since
> > > there's no pcode command to do that, so we'll have to just assume that
> > > it worked.
> >
> > +static u32 cnl_cur_voltage(struct drm_i915_private *dev_priv)
> > +{
> > + u32 voltage;
> > + sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &voltage);
>
> I don't think that'll work. _pcode_read() and _pcode_write() are actually
> the same thing, the only difference is whether we return the resulting value
> or not. Thus if we actually tried to do this we'd end up setting the
> voltage instead of reading it.
:(
>
> The only way to actually read anything is for pcode to specify a
> specific read command. It's a rather unfortunate design of the
> mailbox interface :(
>
> We should perhaps put some WARNS into the pcode read/write functions so
> that people don't accidentally use them in the wrong way.
>
> > + return voltage;
> > +}
> > +
> > static void cnl_get_cdclk(struct drm_i915_private *dev_priv,
> > struct intel_cdclk_state *cdclk_state)
> > {
> > @@ -1486,8 +1493,7 @@ static void cnl_get_cdclk(struct drm_i915_private
> > *dev_priv,
> >
> > cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div);
> >
> > + cdclk_state->voltage = cnl_cur_voltage(dev_priv);
> > }
> >
> > static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
> > @@ -1594,8 +1600,7 @@ static void cnl_set_cdclk(struct drm_i915_private
> > *dev_priv,
> >
> > intel_update_cdclk(dev_priv);
> >
> > + dev_priv->cdclk.hw.voltage = cnl_cur_voltage(dev_priv);
> >
> >
> > >
> > > Cc: Mika Kahola <mika.kah...@intel.com>
> > > Cc: Manasi Navare <manasi.d.nav...@intel.com>
> > > Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> > > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > > ---
> > > drivers/gpu/drm/i915/intel_cdclk.c | 44
> > > ++++++++++++++++++++++++--------------
> > > 1 file changed, 28 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c
> > > b/drivers/gpu/drm/i915/intel_cdclk.c
> > > index 1b4dcd9689da..795a18f64c4c 100644
> > > --- a/drivers/gpu/drm/i915/intel_cdclk.c
> > > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> > > @@ -1505,6 +1505,19 @@ static int cnl_calc_cdclk(int min_cdclk)
> > > return 168000;
> > > }
> > >
> > > +static u8 cnl_calc_voltage(int cdclk)
> > > +{
> > > + switch (cdclk) {
> > > + default:
> > > + case 168000:
> > > + return 0;
> > > + case 336000:
> > > + return 1;
> > > + case 528000:
> > > + return 2;
> > > + }
> > > +}
> >
> > where is the port_clock taking into account?
>
> Last patch of the series.
>
> >
> > > +
> > > static void cnl_cdclk_pll_update(struct drm_i915_private *dev_priv,
> > > struct intel_cdclk_state *cdclk_state)
> > > {
> > > @@ -1538,7 +1551,7 @@ static void cnl_get_cdclk(struct drm_i915_private
> > > *dev_priv,
> > > cdclk_state->cdclk = cdclk_state->ref;
> > >
> > > if (cdclk_state->vco == 0)
> > > - return;
> > > + goto out;
> > >
> > > divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
> > >
> > > @@ -1555,6 +1568,13 @@ static void cnl_get_cdclk(struct drm_i915_private
> > > *dev_priv,
> > > }
> > >
> > > cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div);
> > > +
> > > + out:
> > > + /*
> > > + * Can't read this out :( Let's assume it's
> > > + * at least what the CDCLK frequency requires.
> > > + */
> > > + cdclk_state->voltage = cnl_calc_voltage(cdclk_state->cdclk);
> > > }
> > >
> > > static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
> > > @@ -1595,7 +1615,7 @@ static void cnl_set_cdclk(struct drm_i915_private
> > > *dev_priv,
> > > {
> > > int cdclk = cdclk_state->cdclk;
> > > int vco = cdclk_state->vco;
> > > - u32 val, divider, pcu_ack;
> > > + u32 val, divider;
> > > int ret;
> > >
> > > mutex_lock(&dev_priv->pcu_lock);
> > > @@ -1624,19 +1644,6 @@ static void cnl_set_cdclk(struct drm_i915_private
> > > *dev_priv,
> > > break;
> > > }
> > >
> > > - switch (cdclk) {
> > > - case 528000:
> > > - pcu_ack = 2;
> > > - break;
> > > - case 336000:
> > > - pcu_ack = 1;
> > > - break;
> > > - case 168000:
> > > - default:
> > > - pcu_ack = 0;
> > > - break;
> > > - }
> > > -
> > > if (dev_priv->cdclk.hw.vco != 0 &&
> > > dev_priv->cdclk.hw.vco != vco)
> > > cnl_cdclk_pll_disable(dev_priv);
> > > @@ -1654,7 +1661,8 @@ static void cnl_set_cdclk(struct drm_i915_private
> > > *dev_priv,
> > >
> > > /* inform PCU of the change */
> > > mutex_lock(&dev_priv->pcu_lock);
> > > - sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
> > > + sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> > > + cdclk_state->voltage);
> > > mutex_unlock(&dev_priv->pcu_lock);
> > >
> > > intel_update_cdclk(dev_priv);
> > > @@ -1747,6 +1755,7 @@ void cnl_init_cdclk(struct drm_i915_private
> > > *dev_priv)
> > >
> > > cdclk_state.cdclk = cnl_calc_cdclk(0);
> > > cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
> > > + cdclk_state.voltage = cnl_calc_voltage(cdclk_state.cdclk);
> > >
> > > cnl_set_cdclk(dev_priv, &cdclk_state);
> > > }
> > > @@ -1764,6 +1773,7 @@ void cnl_uninit_cdclk(struct drm_i915_private
> > > *dev_priv)
> > >
> > > cdclk_state.cdclk = cdclk_state.ref;
> > > cdclk_state.vco = 0;
> > > + cdclk_state.voltage = cnl_calc_voltage(cdclk_state.cdclk);
> > >
> > > cnl_set_cdclk(dev_priv, &cdclk_state);
> > > }
> > > @@ -2081,6 +2091,7 @@ static int cnl_modeset_calc_cdclk(struct
> > > drm_atomic_state *state)
> > >
> > > intel_state->cdclk.logical.vco = vco;
> > > intel_state->cdclk.logical.cdclk = cdclk;
> > > + intel_state->cdclk.logical.voltage = cnl_calc_voltage(cdclk);
> > >
> > > if (!intel_state->active_crtcs) {
> > > cdclk = cnl_calc_cdclk(0);
> > > @@ -2088,6 +2099,7 @@ static int cnl_modeset_calc_cdclk(struct
> > > drm_atomic_state *state)
> > >
> > > intel_state->cdclk.actual.vco = vco;
> > > intel_state->cdclk.actual.cdclk = cdclk;
> > > + intel_state->cdclk.actual.voltage = cnl_calc_voltage(cdclk);
> > > } else {
> > > intel_state->cdclk.actual =
> > > intel_state->cdclk.logical;
> > > --
> > > 2.13.6
> > >
>
> --
> Ville Syrjälä
> Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
