If these regs don't have valid values, the panel won't come up, and may
even cause a system hang. So do a basic sanity check when an eDP panel
is detected.
Signed-off-by: Jesse Barnes <jbar...@virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_dp.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 110552f..6346b29 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2462,6 +2462,13 @@ intel_dp_init(struct drm_device *dev, int output_reg)
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
pp_div = I915_READ(PCH_PP_DIVISOR);
+ if (!pp_on || !pp_off || !pp_div) {
+ DRM_INFO("bad panel power sequencing delays, disabling
panel\n");
+ intel_dp_encoder_destroy(&intel_dp->base.base);
+ intel_dp_destroy(&intel_connector->base);
+ return;
+ }
+
/* Pull timing values out of registers */
cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
PANEL_POWER_UP_DELAY_SHIFT;
--
1.7.4.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
