I am facing nothing of this sort of problems on RH 7.1. Intel 810 based M/B
with 40GB HDD. My / is below 1024 cylinder, while both the /var and /home
are over this limit.

Kapil Sethi
System Administrator
BharatConnect Ltd.
Ph: 011-6430987
----- Original Message -----
From: "Mithun Bhattacharya" <[EMAIL PROTECTED]>
To: "general linux" <[EMAIL PROTECTED]>
Cc: "linux programmers" <[EMAIL PROTECTED]>;
"Linux-India" <[EMAIL PROTECTED]>
Sent: Tuesday, February 19, 2002 3:41 PM
Subject: Re: [ilugd]: Rhat 7.2 on 40GB hdd


> Manish K Arya wrote:
> > hi
> >   i have installed Rhat 7.2 on 40 GB hdd.i m facing problems like
> > 1)at reboot and halt sometimes system is not able to umount partitions
> > 2)at many times i face kernel errors (like page fault,OOPs etc)
> >
> > does any can tell me is there something  wrong with hdd.
> > i have heard that 40GB hdds give problems
>
>
> Hard disk wise all Seagate IDE hard disk available in Nehru Place, Delhi
> in the recent years are crap :). Other than that hard disk failures
> would have symptoms like files dissapearing mysteriously, DMA error's on
> the console and error messages in the system log.
>
> Kernel oops probably are due to faulty hardware other than hard disk
> like memory, motherboard, smps fan not cooling sufficiently ??? Umount
> not working is probably because of some network filesystem becoming
> unavailable. I assume you dont get all the messages in one go !! Hope
> you dont have a VIA motherboard - the kernel crashes while shuting down
> on those beasts :(.
>
> Just a note this post is not really for LIP unless you are experimenting
> with kernel modules which could have caused the oops.
>
>
>
> Mithun
>
>           ================================================
> To subscribe, send email to [EMAIL PROTECTED] with subscribe in
subject header
> To unsubscribe, send email to [EMAIL PROTECTED] with unsubscribe in
subject header
> Archives are available at http://www.mail-archive.com/ilugd%40wpaa.org
>           =================================================
>

          ================================================
To subscribe, send email to [EMAIL PROTECTED] with subscribe in subject header
To unsubscribe, send email to [EMAIL PROTECTED] with unsubscribe in subject header
Archives are available at http://www.mail-archive.com/ilugd%40wpaa.org
          =================================================

Reply via email to