On Sat, Aug 1, 2009 at 2:37 AM, Rahul Sundaram
<sunda...@fedoraproject.org>wrote:

> What error? What you just showed was output from system-config-network
> and not NetworkManager.
>

These are the errors:

[i...@localhost ~]$ dmesg | grep tty
console [tty0] enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
cdc_acm 5-2:1.1: ttyACM0: USB ACM device
[i...@localhost ~]$ wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<Info>: Device or resource busy
Modem Port Scan<*1>: S0
ttyS1<Info>: Device or resource busy
Modem Port Scan<*1>: S1
ttyS2<Info>: Device or resource busy
Modem Port Scan<*1>: S2
ttyS3<Info>: Device or resource busy
Modem Port Scan<*1>: S3
ttyACM0<Info>: Device or resource busy
Modem Port Scan<*1>: ACM0


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

[r...@localhost imam]# ifdown eth0
usage: ifdown <device name>
[r...@localhost imam]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
[r...@localhost imam]#


-- 
Best,
Zico
_______________________________________________
To unsubscribe, email ilugc-requ...@ae.iitm.ac.in with 
"unsubscribe <password> <address>"
in the subject or body of the message.  
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc

Reply via email to