Hi Horatiu,
I added the following code in the services.conf file
vars.memory_win_warn = 70%
vars.memory_win_crit = 90%
but when I am restarting the icinga2 service then it is failing to start. If I
remove the above code and restart the icinga2 service then it works fine. Can
you suggest as why the arguments causing the issue?
Kind Regards,
Rohit Gupta
IT Infrastructure Manager
Synchronized Communications Ltd
Unit 5, Stonefield Way,
South Ruislip Middlesex
London UK– HA4 0JS
DDI: +44(0)208 185 6163
Fax: +44(0)208 845 3657
Email: rohit.gu...@syncoms.co.uk
Web: www.syncoms.co.uk
please don't print this e-mail unless you really need to
Confidentiality Notice | Legal | Disclaimer
-----Original Message-----
From: icinga-users [mailto:icinga-users-boun...@lists.icinga.org] On Behalf Of
Horatiu N
Sent: 26 October 2015 11:06
To: icinga-users@lists.icinga.org
Subject: Re: [icinga-users] Service related question for remote node (windows)
Hi,
apply Service "memory" {
import "generic-service"
vars.memory_win_warn = 70%
vars.memory_win_crit = 90%
check_command = "memory-windows"
assign where host.name == NodeName
}
I guess that should do it.
On 26-Oct-15 11:12 AM, Rohit Gupta wrote:
> Hi Horatiu,
>
> Thanks for replying back.
>
> I have read this document on your last email but little bit confused in
> passing the parameters. If you can give an example for this that would be gr8
> and it will help me pass the arguments for rest of the commands too. Much
> appreciated in advance.
>
> Kind Regards,
>
> Rohit Gupta
> IT Infrastructure Manager
> Synchronized Communications Ltd
>
>
> Unit 5, Stonefield Way,
> South Ruislip Middlesex
> London UK– HA4 0JS
>
> DDI: +44(0)208 185 6163
> Fax: +44(0)208 845 3657
> Email: rohit.gu...@syncoms.co.uk
> Web: www.syncoms.co.uk
> please don't print this e-mail unless you really need to
> Confidentiality Notice | Legal | Disclaimer
>
>
>
>
> -----Original Message-----
> From: icinga-users [mailto:icinga-users-boun...@lists.icinga.org] On
> Behalf Of Horatiu N
> Sent: 23 October 2015 18:43
> To: icinga-users@lists.icinga.org
> Subject: Re: [icinga-users] Service related question for remote node
> (windows)
>
> http://docs.icinga.org/icinga2/latest/doc/module/icinga2/toc#!/icinga2
> /latest/doc/module/icinga2/chapter/windows-plugins#windows-plugins-mem
> ory-windows
>
> Percentage based thresholds can be used by adding a '%' to the threshold
> value. Keep in mind that memory_win_unit is applied before the value is
> calculated.
>
> It sais so plainly right there.
>
> On 23-Oct-15 7:17 PM, Rohit Gupta wrote:
>> Hi All,
>>
>> If anyone can give an example to pass the arguments value
>> "memory_win_warn" " memory_win_crit" on
>>
>> apply Service "memory" {
>> import "generic-service"
>> check_command = "memory-windows"
>> assign where host.name == NodeName
>> }
>>
>> Much appreciated
>>
>> Kind Regards,
>>
>> Rohit Gupta
>> IT Infrastructure Manager
>> Synchronized Communications Ltd
>>
>>
>> Unit 5, Stonefield Way,
>> South Ruislip Middlesex
>> London UK– HA4 0JS
>>
>> DDI: +44(0)208 185 6163
>> Fax: +44(0)208 845 3657
>> Email: rohit.gu...@syncoms.co.uk
>> Web: www.syncoms.co.uk
>> please don't print this e-mail unless you really need to
>> Confidentiality Notice | Legal | Disclaimer
>>
>>
>>
>>
>> -----Original Message-----
>> From: Rohit Gupta
>> Sent: 23 October 2015 11:09
>> To: icinga-users@lists.icinga.org
>> Subject: RE: [icinga-users] Service related question for remote node
>> (windows)
>>
>> Hi Horatiu,
>>
>> Thanks a lot for your support. You're a star.
>>
>> Another questions related to the same config: what will be the configuration
>> if I have to place check points on the memory and disk usage? For instance
>> if I want to set warning message if memory utilization reaches 80% and
>> critical indicator when it reaches 90%? Also the same indicators for disk
>> space check?
>>
>> Thanks in advance :-)
>>
>> Kind Regards,
>>
>> Rohit Gupta
>>
>>
>> -----Original Message-----
>> From: icinga-users [mailto:icinga-users-boun...@lists.icinga.org] On
>> Behalf Of Horatiu N
>> Sent: 22 October 2015 18:02
>> To: icinga-users@lists.icinga.org
>> Subject: Re: [icinga-users] Service related question for remote node
>> (windows)
>>
>> Hello,
>> From what you're telling me it looks like you need to setup a check memory
>> service.
>> Should be like this on your windows server:
>> in C:\Program Files (x86)\ICINGA2\etc\icinga2\conf.d\services.conf
>> or wherever you installed it :)
>> just add this (check already existing examples for inspiration)
>>
>> apply Service "memory" {
>> import "generic-service"
>> check_command = "memory-windows"
>> assign where host.name == NodeName
>> }
>>
>> then restart the service or reload it i dont know exactly how that works in
>> windows, and wait a couple of seconds for the config to be sent to the
>> master then on the master issue a icinga2 node list and you should see smth
>> like :
>>
>> Node 'windowsserver' (last seen: Thu Oct 22 20:00:07 2015)
>> * Host 'windowsserver'
>> * Service 'ping4'
>> * Service 'ping6'
>> * Service 'disk'
>> * Service 'disk C:'
>> * Service 'icinga'
>> * Service 'load'
>> * Service 'procs'
>> * Service 'swap'
>> * Service 'users'
>> * Service 'memory' <---- there .
>>
>> then just update your config
>> icinga2 node update-config
>> service icinga2 restart
>> and check your front-end. that should do it.
>> more on this plugin's specifics here :
>> http://docs.icinga.org/icinga2/latest/doc/module/icinga2/toc#!/icinga
>> 2
>> /latest/doc/module/icinga2/chapter/windows-plugins#windows-plugins-me
>> m
>> ory-windows
>>
>> Best wishes :)
>>
>> Horatiu.
>>
>> On 22-Oct-15 6:29 PM, Rohit Gupta wrote:
>>> Dear,
>>>
>>>
>>>
>>> I am newbie and have been assigned to configure Icinga2 as our
>>> monitoring tool. So far, I have been successful in installing
>>> Icinga2 on Ubuntu server 15.04 following the setup docs and also
>>> been successful in installing the remote client (windows Server)
>>> icinga agent application and synchronizing with Master node.
>>>
>>>
>>>
>>> Now, I can see the new server on the icinga-web but I am unable to
>>> see ‘mem’ service on it. Can you please assist as what do I have to
>>> do in order to get ‘mem’ service listed? Also if I have to setup the
>>> arguments on disk capacity & mem (for instance warn, critical etc)
>>> then on which files I have to make changes in order to make it happen.
>>>
>>>
>>>
>>> Thanks in advance for your generosity and time to assist.
>>>
>>>
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> *Rohit Gupta*
>>>
>>> IT Infrastructure Manager
>>>
>>>
>>> * *
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> icinga-users mailing list
>>> icinga-users@lists.icinga.org
>>> https://lists.icinga.org/mailman/listinfo/icinga-users
>>>
>>
>> _______________________________________________
>> icinga-users mailing list
>> icinga-users@lists.icinga.org
>> https://lists.icinga.org/mailman/listinfo/icinga-users
>>
>
> _______________________________________________
> icinga-users mailing list
> icinga-users@lists.icinga.org
> https://lists.icinga.org/mailman/listinfo/icinga-users
>
_______________________________________________
icinga-users mailing list
icinga-users@lists.icinga.org
https://lists.icinga.org/mailman/listinfo/icinga-users
