The Visara is a CCA-3074. 3074 is FICON point-to-point connected. Visara terminals are connected by TCPIP through a switch on a private network, and defined as "hot" consoles. I don't think the SSL option was used since it is a simple private network. The HMC 3270 option was attempted and also got no response. We are preparing to build a new DR system environment.
> Sent: Monday, October 21, 2019 at 7:02 AM > From: "Mazer Ken G" <000001e8b07bfbbe-dmarc-requ...@listserv.ua.edu> > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Standalone DFDSS > > Don, > > Is your Visara connected via OSA-ICC? Does the console in question receive > the OSA-ICC three line display? > You didn't indicate the reason for running Standalone DFDSS, did you get a > new processor or are you setting up a new DR environment. > > The reason I ask these questions is that we just replaced z13's with z14's > and the OSA Express6s cards are a little different as they now have TLS 1.0 > enabled. > It could be that you need to update your certs on the Visara for the sessions > to connect. > > Ken Mazer > This Cranky Systems Programmer says “Share your knowledge, others may find it > useful” > > > -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of > Donald J > Sent: Saturday, October 19, 2019 9:26 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Standalone DFDSS > > Thanks Jim & Brian > We have Visara which seems to not be working. > Ticket is open on it. > > > Sent: Saturday, October 19, 2019 at 1:08 AM > > From: "Brian Westerman" <brian_wester...@syzygyinc.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: Standalone DFDSS > > > > Jim is correct, all it takes is for one of the consoles that is attached to > > the ICC, or which you have limited your DFDSS SA build to to press enter. > > I have found that almost any key that generates "something" seems to work > > though, the function keys, pageup etc. The ones that just move the cursor > > around (i.e. home) don't generate what it's looking for. > > > > In short, enter works fine. > > > > Brian > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
