Hi Allan, Try using &SYSR1 to Catalog SYS1.PARMLIB on the SYSRES and let me know if it works. In z/OS 2.1 it didn't.
Regards, David On 2019-08-28 08:35, Allan Staller wrote: > I have never has a problem using &SYSR1 anywhere ****** could have been used. > Actually, the resolution of &SYSR1 occurs very early in the IPL, long before > CAS is initialized. > > HTH, > > -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of > Vernooij, Kees (ITOP NM) - KLM > Sent: Wednesday, August 28, 2019 1:16 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Clarification on DASD mod conversion of SYSRES > > The difference is that &SYSR1 is resolved by CAS, which is not yet > initialized at that moment. Until then, ****** does the built-in substitution. > > Kees. > > >> -----Original Message----- >> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] >> On Behalf Of Barbara Nitz >> Sent: 28 August, 2019 6:52 >> To: IBM-MAIN@LISTSERV.UA.EDU >> Subject: Re: Clarification on DASD mod conversion of SYSRES >> >>> There shouldn’t be Jake. I'm running MOD-54's for my sysres volumes >>> and >> have been for years. Probably the only issue you might have is if you >> are going from a multi-sysres config where you had multiple system >> symbols for catalog purposes, you'll just have to fix that to all use >> either >> ****** or &SYSR1. >> >> The last time I did this exercise (when rearranging an ADCD system) >> about >> 4-5 years ago I fell flat on my face when I catalogued the sysres data >> sets on the sysres I IPL'd from to use the qualifier &SYSR1.. The >> system didn't come up because it found just about nothing. After >> staring at the manual for a while, I read the manual that you *must* >> use ****** for all data sets on the sysres volume you use to IPL. Sure >> enough, once I had recatalogued everything from &SYSR1. to ******, the >> system came up. >> >> Has that changed in the meantime? Are &SYSR1. and ****** interchangeable? >> >> Regards, Barbara >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ******************************************************** > For information, services and offers, please visit our web site: > https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.klm.com&data=02%7C01%7C%7Cbf2e9dc5359541b195a408d72bb46234%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637025926094132509&sdata=wBXxO2VChKVTDUY4zaxIEb55Pcld%2FbFEugNxBw0nzZA%3D&reserved=0. > This e-mail and any attachment may contain confidential and privileged > material intended for the addressee only. If you are not the addressee, you > are notified that no part of the e-mail or any attachment may be disclosed, > copied or distributed, and that any other action related to this e-mail or > attachment is strictly prohibited, and may be unlawful. If you have received > this e-mail by error, please notify the sender immediately by return e-mail, > and delete this message. > > Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its > employees shall not be liable for the incorrect or incomplete transmission of > this e-mail or any attachments, nor responsible for any delay in receipt. > Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch > Airlines) is registered in Amstelveen, The Netherlands, with registered > number 33014286 > ******************************************************** > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ::DISCLAIMER:: > -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. E-mail transmission is not > guaranteed to be secure or error-free as information could be intercepted, > corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses > in transmission. The e mail and its contents (with or without referred > errors) shall therefore not attach any liability on the originator or HCL or > its affiliates. Views or opinions, if any, presented in this email are solely > those of the author and may not necessarily reflect the views or opinions of > HCL or its affiliates. Any form of reproduction, dissemination, copying, > disclosure, modification, distribution and / or publication of this message > without the prior written consent of authorized representative of HCL is > strictly prohibited. If you have received this email in error please delete > it and notify the sender immediately. Before opening any email and/or > attachments, please check them for viruses and other defects. > -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
