You are referring to your 5:15 post got it either way my code till this point has been all NON-LE Assembler to call that stub AMODE 64 C main I Need to LINKX AMODE64OK=YES right ?
-----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Joe Monk Sent: Friday, August 23, 2019 8:08 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: LE 64 bit no main assembler ? Right you need a stub main. If you look at the section I referred you to, right below that is the preinit services section. Joe On Fri, Aug 23, 2019 at 7:18 AM Joseph Reichman <reichman...@gmail.com> wrote: > The problem as in my original thread that CELQPRLG is NOT Main > enabled or rather CELQMAIN > > > > -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > Behalf Of Joe Monk > Sent: Friday, August 23, 2019 6:14 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: LE 64 bit no main assembler ? > > Have a look here... Youre calling 64bit C from assembler correct? > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zo > s.v2r2.ceeam00/clamcal.htm > > You'll need to bracket the code with the PRLG and EPIL macros detailed > there as well. > > Joe > > On Fri, Aug 23, 2019 at 5:34 AM Joseph Reichman > <reichman...@gmail.com> > wrote: > > > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm. > > zo > > s.v2r1.ceea400/cee142446.htm > > > > Thanks I think I need to do this no ? > > > > -----Original Message----- > > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > > Behalf Of Joe Monk > > Sent: Friday, August 23, 2019 5:16 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: LE 64 bit no main assembler ? > > > > Perhaps this will help ... > > > > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm. > > zo > > s.v2r2.cbcpx01/cexample.htm > > > > Joe > > > > On Thu, Aug 22, 2019 at 10:49 PM Joseph Reichman > > <reichman...@gmail.com <mailto:reichman...@gmail.com> > > > wrote: > > > > > Hi > > > > > > All of the code I have on my system is assembler. The Code is a > > > TCP/IP Serve to a Windows Client. I had similar functions in > > > Windows and the Mainframe > > > > > > So I figure I would use the windows code on the mainframe. The > > > code use a lot of storage so I decided to go AMODE 64 where by the > > > malloc would be from above the bar > > > > > > I had an Assembler CEEPCALL in 31 bit that worked calling the C > > > Dll > > > > > > When I went to change it 64 bit both the Calling Assembler and the > > > C DLL., I got U4093 reason X'218' the 64 bit Assembler > > > > > > I saw this thread from IBMMAIN from a few years ago > > > > > > > > > https://www.mail-archive.com/ibm-main@listserv.ua.edu/msg55945.htm > > > l > > > > > > > > > It seems from the thread that CELQPRLG and CELQCALL Cant Call the > > > 64 BIT C Dll > > > > > > And I would need the Assembler program to Call a 64 BIT C main > > > program to Call the C Dll > > > > > > As I recognize a few of the names on the thread wonder if any one > > > can confirm that a) The 64 bit assembler can not call 64 bit C DLL > > > b) the Assembler can call a 64 bit C main which would then call > > > the > > > 64 bit C Dll > > > > > > thanks > > > > > > ------------------------------------------------------------------ > > > -- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to lists...@listserv.ua.edu > > > <mailto:lists...@listserv.ua.edu> > > with the message: INFO IBM-MAIN > > > > > > > -------------------------------------------------------------------- > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu > > <mailto:lists...@listserv.ua.edu> with the > > message: INFO IBM-MAIN > > > > -------------------------------------------------------------------- > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
