Crispin, No z14 here either but on EC12 I found that you could not have CRLF as end of line in the USB file, had to have only LF. I used Notepad++ to change CRLF to LF.
Just my 2 cents. Best Regards, Doug .. On Nov 2, 2017, at 16:34, Rob Schramm <rob.schr...@gmail.com> wrote: Yea.. discovered the USB limitation as well. The ftp support is seriously deficient. On Thu, Nov 2, 2017, 2:25 PM Jesse 1 Robinson <jesse1.robin...@sce.com> wrote: > Expanding a bit on the 'right HMC'. There are two PC-like thingies to > choose from: the SE internal to the box, and one or more HMCs in the CEC > network. I believe that when I first tried this on a z196, I went first to > the SE. That did not work. Moved to the nearby HMC, and all was fine. > > But in the spirit of the Ogden Nash doggerel about camels and dromedaries: > or else the other way around. In any case, one works but not the other. > > . > . > J.O.Skip Robinson > Southern California Edison Company > Electric Dragon Team Paddler > SHARE MVS Program Co-Manager > 323-715-0595 Mobile > 626-543-6132 Office ⇐=== NEW > robin...@sce.com > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Crispin Hugo > Sent: Thursday, November 02, 2017 10:52 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: (External):Re: Z14 IOCP and USB > > My fault as I was trying to do it remotely. All appears ok now. Thanks > > Crispin Hugo > Systems Specialist > Macro 4 Limited > d: +44 1293 872121 | m: +44 7753951308 | t: +44 1293 872000 | > www.macro4.com > > > > Registered office: The Orangery, Turners Hill Road, Worth, Crawley, West > Sussex, RH10 4SS Registered in England no: 00927588 > > Please consider the environment and only print this email if you really > need to. > > This message (including any attachments) contains confidential information > that is PRIVILEGED, CONFIDENTIAL and/or ATTORNEY WORK PRODUCT and is > intended only for the individual(s) named herein. If you are not the > intended recipient, you are hereby notified that any dissemination, > distribution or copying of this email is strictly prohibited. If you have > received this message in error, please notify the Macro 4 Postmaster ( > postmas...@macro4.com) of the error immediately, do not read or use the > email and any attachments in any manner, destroy all copies, and delete it > from your system if the communication was sent via email. Macro 4 Limited, > Tel: +44 1293 872000 Fax: +44 1293 872001. > > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Jesse 1 Robinson > Sent: 02 November 2017 17:15 > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Z14 IOCP and USB > > I don't have a z14 to verify, but doing it with earlier Z boxes requires > inserting the USB into the right slot on the right HMC. It cannot be done > via remote login, only on a physical HMC connected to the CEC. When you > insert the USB, a message will pop up on the HMC confirming that the USB is > recognized. That's when the 'upload from USB' option becomes selectable. If > you don't see that message, then the USB is not recognized. E.g. wrong slot > or wrong HMC device. I think the IOCDS needs to be in the root directory on > the USB. > > . > . > J.O.Skip Robinson > Southern California Edison Company > Electric Dragon Team Paddler > SHARE MVS Program Co-Manager > 323-715-0595 Mobile > 626-543-6132 Office ⇐=== NEW > robin...@sce.com > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of R.S. > Sent: Thursday, November 02, 2017 9:44 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: (External):Re: Z14 IOCP and USB > > W dniu 2017-11-02 o 17:36, Crispin Hugo pisze: >> Trying to get IOCP onto new Z14 and it seems it only wants me to use FTP > and not USB. >> I start on HMC, get over to SE single operations, select I/O > configuration. The USB option is greyed out. >> After I did get one over via FTP(a real pain) after the build , the > source had disappeared. What am I doing wrong. > > It seems you do it properly, at least it worked for 13 and previous > machines. > Wild guesses: > Maybe insert USB stick before you start the dialog? Or just after? > Note, remove any other stick! > Or go to the CPC and logon of SE directly? > > > -- > Radoslaw Skorupka > Lodz, Poland > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- Rob Schramm ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
