I don't have a z14 to verify, but doing it with earlier Z boxes requires inserting the USB into the right slot on the right HMC. It cannot be done via remote login, only on a physical HMC connected to the CEC. When you insert the USB, a message will pop up on the HMC confirming that the USB is recognized. That's when the 'upload from USB' option becomes selectable. If you don't see that message, then the USB is not recognized. E.g. wrong slot or wrong HMC device. I think the IOCDS needs to be in the root directory on the USB.
. . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-543-6132 Office ⇐=== NEW robin...@sce.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of R.S. Sent: Thursday, November 02, 2017 9:44 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: Z14 IOCP and USB W dniu 2017-11-02 o 17:36, Crispin Hugo pisze: > Trying to get IOCP onto new Z14 and it seems it only wants me to use FTP and > not USB. > I start on HMC, get over to SE single operations, select I/O configuration. > The USB option is greyed out. > After I did get one over via FTP(a real pain) after the build , the source > had disappeared. What am I doing wrong. It seems you do it properly, at least it worked for 13 and previous machines. Wild guesses: Maybe insert USB stick before you start the dialog? Or just after? Note, remove any other stick! Or go to the CPC and logon of SE directly? -- Radoslaw Skorupka Lodz, Poland ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
