The SMS documentation clears says that
SUBSYS SUBNAME(SMS) INITRTN(IGDSSIIN) INITPARM('ID=00,PROMPT=DISPLAY')
Should be the first entry in IEFSSNxx and you don't seem to have it at all.
If SYSTEM.DB210.LINKLIST is a PDS/E, then that would be yet another reason to
be sure to have SMS initialized first.
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]]
> On Behalf Of Jake anderson
> Sent: Tuesday, October 07, 2014 4:49 AM
> To: [email protected]
> Subject: Re: Linklist load during IPL message
>
> Hi Peter/All,
>
> I did :
>
> SETPROG LNKLST TEST NAME(CURRENT) MOD(DSN3INI) CSV502I MODULE
> DSN3INI WAS LOCATED 715 IN DATA SET SYSTEM.DB210.LINKLIST USING
> LNKLST SET CURRENT
>
>
> SUBSYS SUBNAME(JES2) /* JES2 IS THE PRIMARY SUBSYSTEM */
> PRIMARY(YES) START(NO)
> SUBSYS SUBNAME(BLSR) /* BATCH LOCAL SHARED RESOURCES */
> INITRTN(CSRBISUB)
> SUBSYS SUBNAME(XXXX)
> INITRTN(DSN3INI)
> INITPARM('DSN3EPX,!XXXX,S')
>
>
> The DB2 maintenance went on before the IPL, but not sure if some of the PTF
> would have caused this problem.
>
>
>
>
> On Tue, Oct 7, 2014 at 5:01 PM, Peter Relson <[email protected]> wrote:
>
> > If you have not dynamically updated the LNKLST after IPL, then
> > probably the easiest thing to do is
> >
> > SETPROG LNKLST TEST NAME(CURRENT) MOD(xxxx).
> >
> > Which will use the actual LNKLST DCB to "search" for xxxx. Given the
> > behavior cited, it likely won't be found. And there likely is a
> > message about the data set in question in the log.
> >
> > Substitute LNKLST00 (or whatever was the IPL-time definition via
> > PROGxx) if you have dynamically updated the LNKLST.
> >
> > I'm sure we all recognize that the phrase "LINKLIST libraries are loaded"
> > from the OP is not really legit. The libraries themselves are not
> > "loaded". Modules are loaded from the libraries (upon request/demand).
> >
> > Peter Relson
> > z/OS Core Technology Design
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
> >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email to
> [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
