Hello Roger,
The output are as :
COMMAND INPUT ===> /DS P,3000 SCROLL ===>
CSR
RESPONSE=DEV1
IEE459I 19.13.40 DEVSERV PATHS 065
UNIT DTYPE M CNT VOLSER CHPID=PATH STATUS
RTYPE SSID CFW TC DFW PIN DC-STATE CCA DDC CYL CU-TYPE
03000,33903 ,O,000,LX3000,A0=+ A1=+ A2=+ A3=+ A4=< A5=- A6=- A7=-
2107 3000 Y YY. YY. N SIMPLEX 00 00 1113 2107
************************ SYMBOL DEFINITIONS ************************
O = ONLINE + = PATH AVAILABLE
- = LOGICALLY OFF, PHYSICALLY OFF < = PHYSICALLY UNAVAILABLE
COMMAND INPUT ===> /DS QD,3000 SCROLL
===> CSR
RESPONSE=DEV1
IEE459I 19.15.03 DEVSERV QDASD 067
UNIT VOLSER SCUTYPE DEVTYPE CYL SSID SCU-SERIAL DEV-SERIAL EFC
03000 LX3000 2107951 2107900 1113 3000 0175-WW631 0175-WW631 *OK
**** 1 DEVICE(S) MET THE SELECTION CRITERIA
**** 0 DEVICE(S) FAILED EXTENDED FUNCTION CHECKING
On Fri, Nov 22, 2013 at 10:51 PM, Roger Steyn <[email protected]> wrote:
> Hello Jake ,
> This actually means " The system could not add the specified path to a
> path group."
>
> Is the cable connected properly ? That's the first thing to be checked .
>
> Also look at logrec data Sounds to me like a "no resources" condition
> over the control unit . Try these commands
>
>
> a) DS P,dddd
>
> b) DS QD,dddd
>
> Thank you ,
> Steyn !
>
>
>
>
> On Thursday, November 21, 2013 5:32 PM, Lizette Koehler <
> [email protected]> wrote:
>
> I would start by doing an internet search on your messages IOS444I. There
> should be some helpful hints out there.
>
> Lizette
>
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of Jake anderson
> > Sent: Thursday, November 21, 2013 1:18 AM
> > To: [email protected]
> > Subject: CHPID dynamic Activation error
> >
> > Hello Group,
> >
> > For our New storage Box,While dynamically adding new CHPID to existing
> control
> > UNIT, I tried displaying new CHIPD but its only show that path are
> online
> not
> > operational. I have referred the below link but I am not able to get any
> Clue.
> >
> >
> > http://publibz.boulder.ibm.com/cgi-
> > bin/bookmgr_OS390/BOOKS/IEA2M9C1/SPTM013022
> >
> > D M=CHP(E2)
> > IEE174I 23.18.04 DISPLAY M 250
> > CHPID E2: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE DEVICE
> > STATUS FOR CHANNEL PATH E2
> > 0 1 2 3 4 5 6 7 8 9 A B C D E F
> > 300 * * * * * * * * * * * * * * * *
> > 301 * * * * * * * * * * * * * * * *
> > 302 * * * * * * * * * * * * * * * *
> > 303 * * * * * * * * * * * * * * * *
> > 304 * * * * * * * * * * * * * * * *
> > 305 * * * * * * * * * * * * * * * *
> > 306 * * * * * * * * * * * * * * * *
> > 307 * * * * * * * * * * * * * * * *
> > 308 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL
> > 309 AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL 30A AL AL AL AL AL AL
> > AL AL AL AL AL AL AL AL AL AL
> >
> >
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F38,E2)
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3E,E2)
> > IOS444I DYNAMIC PATHING NOT OPERATIONAL ON PATH (3F3F,E2)
> >
> > Could someone please shed light on the above. Any suggestions or
> directions are
> > much appreciated.
> >
> > Jake
> >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
