Not sure what your config is but you could speak to IBM about using a "limited license TDMF" to do the migration via a Service Offering ....
On Sun, 31 Aug 2025 06:41:58 -0500, Steve Beaver <[email protected]> wrote: >ADRDSSU Move > > >Sent from my iPhone > >No one said I could type with one thumb > >> On Aug 31, 2025, at 06:22, Radoslaw Skorupka >> <[email protected]> wrote: >> >> It depends. >> There is no single pill for every disease. >> One of approaches would be remote copy from old array to new array (despite >> "remote" mean few feet apart or even closer). >> Good for large configuration, as it would move all the data with very small >> or none disruption. >> Bad for ideas I mentioned: volume sizing change, etc. >> >> Without knowing your setup and requirements it is guessing. Good fun, but it >> is not a plan. >> >> -- >> Radoslaw Skorupka >> Lodz, Poland >> >> >> >> >> W dniu 31.08.2025 o 10:34, Peter pisze: >>> What would be the approach to copy the data between storage box(between Old >>> and new) when they are in same datacentre where DS8886 and DS8910F are >>> placed in same rack >>> >>> >>> >>>> On Wed, 20 Aug 2025, 00:08 Radoslaw Skorupka, < >>>> [email protected]> wrote: >>>> >>>> W dniu 18.08.2025 o 15:27, Peter pisze: >>>>> Hello >>>>> >>>>> Has anyone migrated from DS8886 to DS8910F. >>>> Yes. >>>> >>>> >>>>> How did you migrate when your current connectivity to DS box is direct >>>> from >>>>> mainframe instead of switch based? >>>> It is irrelevant. Of course you need free FICON channels in your CPC. >>>> Alternatively you can reduce number of channels for DS8886 and use them > >---------------------------------------------------------------------- >For IBM-MAIN subscribe / signoff / archive access instructions, >send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
