The TN3270/TN3270E protocols were actually invented outside of IBM. But
they're just an envelope for the 3270 data stream. I can tn3270 from a
3279-S3G attached to a 3174 over Token Ring to a P/390 and do charts with
GDDM.

On Fri, Aug 16, 2024 at 8:14 AM Lennie Bradshaw <[email protected]>
wrote:

> Seymour,
> That is interesting. I was unaware the protocol had been externalised from
> IBM. I guess this absolves them of the responsibility of providing
> documentation as well.
>
> Phil asked what was the original posters requirement. Well years ago (in
> the late 1970s) I wrote some program for TSO using 3270 protocols. This was
> in the days before ISPF and before the extended attribute support was
> available. I have been involved in such programs rarely since then, but
> have maintained some knowledge of the protocol. I have somewhere a "Green
> Book" which has all the tables and so on, but I have mislaid it. I had to
> make some changes to a VTAM USS table recently and was looking for the
> specifications for the control strings I could use. As I couldn't find my
> Green Book, I looked online and could not see where IBM had this documented.
> Hence my questions.
>
> The website that Sebastian found was really useful.
>
> Many thanks to all who contributed. I will try and butt out now.
> Lennie
>
> -----Original Message-----
> From: IBM Mainframe Discussion List <[email protected]> On Behalf
> Of Seymour J Metz
> Sent: 16 August 2024 12:56
> To: [email protected]
> Subject: Re: 3270 programming
>
> I would start with  RFC 2355, TN3270 Enhancements <
> https://datatracker.ietf.org/doc/rfc2355/>
>
> --
> Shmuel (Seymour J.) Metz
> http://mason.gmu.edu/~smetz3
> עַם יִשְׂרָאֵל חַי
> נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר
>
>
>
> ________________________________________
> From: IBM Mainframe Discussion List <[email protected]> on behalf
> of Mike Schwab <[email protected]>
> Sent: Thursday, August 15, 2024 11:12 PM
> To: [email protected]
> Subject: Re: 3270 programming
>
>
> https://www.ibm.com/docs/en/zos-basic-skills?topic=terminal-3270-data-stream
> Specifically listed but no link,
>
> On Thu, Aug 15, 2024 at 7:45 PM Tom Brennan <[email protected]>
> wrote:
> >
> > I don't think TN3270/TN3270E protocols are related to this manual.
> > They're basically just a layer used to pass the binary 3270 data
> > stream back and forth.
> >
> > But Lennie has a good point.  I have a printed copy -05 from 1990 and
> > it's pretty beat up.  I seem to remember it on an IBM doc site until
> > (guessing) 2005 or so, then it was suddenly gone.  Maybe someone made
> > a mistake in removing it, because it's certainly required for anybody
> > who wants to code their own 3720 screens, or simply wants to know how
> > things work.
> >
> > On 8/15/2024 5:33 PM, Ken Bloom wrote:
> > > 3270 is supported via tn3270 and tn3270E.   That’s the protocol
> supported by IBM OSA or Visara CCA3074 etc.   You can probably find some
> old coax manuals for native 3270.
> > >
> > > Ken
> > >
> > >
> > > Kenneth A. Bloom
> > > CEO
> > > Avenir Technologies Inc
> > > /d/b/a Visara International
> > > 203-984-2235<tel:203-984-2235>
> > > [email protected]<mailto:[email protected]>
> > > http://www.visara.com/<http://www.visara.com/>
> > >
> > >
> > > On Aug 15, 2024, at 8:22 PM, Lennie Bradshaw <
> [email protected]> wrote:
> > >
> > > So if the protocol is still supported, and still used, and still a
> valid programming interface, why is there no *current* manual available
> from IBM documenting it?
> > >
> > > Lennie
> > >
> > > -----Original Message-----
> > > From: IBM Mainframe Discussion List <[email protected]> On
> > > Behalf Of Jay Maynard
> > > Sent: 15 August 2024 23:02
> > > To: [email protected]
> > > Subject: Re: 3270 programming
> > >
> > > I think IBM still supports 3270 access, if not the 3270s themselves.
> > >
> > > But if the data stream hasn't changed since the -7 manual was
> published, there's no need for an update...
> > >
> > > On Thu, Aug 15, 2024 at 4:54 PM Paul Gilmartin <
> [email protected]> wrote:
> > >
> > > On Thu, 15 Aug 2024 15:16:15 -0500, Mike Schwab  wrote:
> > >
> > > There have been no updates.
> > >
> > > Does IBM continue to support the device?  If not, there's little
> > > business case to provide user's manuals.
> > >
> > > Regardless, some documentation is necessary as long as IBM products
> > > depend on 3270 data streams.
> > >
> > > --
> > > gil
> > >
> > > --------------------------------------------------------------------
> > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to [email protected] with the message: INFO
> > > IBM-MAIN
> > >
> > >
> > >
> > > --
> > > Jay Maynard
> > >
> > > --------------------------------------------------------------------
> > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to [email protected] with the message: INFO
> > > IBM-MAIN
> > >
> > > --------------------------------------------------------------------
> > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to [email protected] with the message: INFO
> > > IBM-MAIN
> > >
> > > --------------------------------------------------------------------
> > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to [email protected] with the message: INFO
> > > IBM-MAIN
> > >
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
>
>
>
> --
> Mike A Schwab, Springfield IL USA
> Where do Forest Rangers go to get away from it all?
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>


-- 
Jay Maynard

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to