Cheryl, Your IPL sequence on any of the LPARS havent changed ? New products ? Have seen sequence issues before , usually turned out to be timing...
Scott ford www.identityforge.com On May 14, 2012, at 3:16 PM, "Meehan, Cheryl" <[email protected]> wrote: > Scott- > > The reason the resource is not available is because the system it is > attached to is coming down. Which makes sense, because we're IPLing it. > > We have never had this issue prior to this version of the operating > system. We do not believe we have any cross LPAR Tasks running that we > have been able to find thus far. > > We plan to check next IPL for any cross netview sessions, and see if a > disconnect is necessary, but it has never been required in the past. > > Cheryl > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Scott Ford > Sent: Monday, May 14, 2012 1:36 PM > To: [email protected] > Subject: Re: Netview Question > > Cheryl, > > Did you review the SNA messages and codes, that's your fist step..sense > 8002 is a resource not available, maybe a timing issue with the IPL ... > > Scott ford > www.identityforge.com > > On May 14, 2012, at 12:21 PM, "Meehan, Cheryl" <[email protected]> wrote: > >> Greetings- >> >> We upgraded our operating system to z/os 1.11 last fall. We have >> IPL'd our Production System twice since then, and each time, we have >> caused our AUTO1 task to fail on our Test System. Last week, we IPL'd > >> our test system, and the AUTO1 task dropped on our Production system. >> Once recovered, we IPL'd our Test system several more times, and never > >> lost AUTO1. >> >> The messages that we are seeing are for our EE link between the two >> system to go down, ( as we are IPLing. . . . ) and then these >> Messages: >> >> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >> APPCCMD RECEIVE FAILED, LUNAME = MVS01, QUALIFY = >> X'11', FEEDBACK = >> (X'4C',X'00',X'80020000') >> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >> APPCCMD SEND FAILED, LUNAME = MVS01, QUALIFY = >> X'07', FEEDBACK = >> (X'4C',X'00',X'80020000') >> MVS2 12134 01:17:32.40 STC35551 00000281 DWO575I RMTCMD > TERMINATED >> ON CSNET.MVS01 WITH SENSE: X'08A80012' >> MVS2 12134 01:17:32.40 STC35551 00000281 DSI769I MVS02 RPL_EXIT >> APPCCMD ALLOC FAILED, LUNAME = MVS01, QUALIFY = >> X'1F', FEEDBACK = >> (X'04',X'00',X'087D0001') >> MVS2 12134 01:17:32.44 STC35551 00000290 IEA631I OPERATOR AUTO12 >> NOW INACTIVE, SYSTEM=MVS2 , LU=AUTO1 >> >> If anyone else has had this issue, I would appreciate your insight. >> >> Cheryl Meehan >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
