Check the status of the PTFs on your system. Those messages would indicate that they are received and not applied.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Larry Martin Sent: Wednesday, November 23, 2011 8:35 AM To: [email protected] Subject: SMPE Help Needed I am applying maintenance zos 1.12 RSU 1108 going to RSU 1110 plus 1.13 toleration. I get a lot of the following messages: GIM65902E ** MODULE GFSA4UAT IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD UA58717 BUT CAN NOT BE USED. ITS DISTRIBUTION ZONE RMID HDZ1C1N IS DIFFERENT FROM THE TARGET ZONE RMID UA60411, AND SYSMOD UA60411 WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS. There are four (4) PTFs referenced in these messages. I ordered them from ShopZ and when I did the Receive I got: GIM24801W NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE RECEIVE COMMAND. GIM20501I RECEIVE PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 04. I do not know how to proceed. Any help would be appreciated............Larry ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
