Sorry I misread the path name So the command should be D M=CHP(B0) Also check out the redbook FICON Planning and Implementation SG24-6497. It has a decent write-up of various reasons for the IOS2001I messages.
Since you B0 / FF is not documented, I would recommend contacting IBM IOS group through an ETR. Have you reset the control unit? Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of > Lizette Koehler > Sent: Friday, May 27, 2011 7:50 AM > To: [email protected] > Subject: Re: INOPERATIVE PATH > > > we are upgrading our z10's to z196's and during the last machine > > upgrade > we started > > loosing paths to different devices and from different channel paths. > > > > We have now one z10 and one z196 with 4 LPARs each in SYSPLEX. > > The messages are displayed through the LPARs of the z10. > > > > *IOS001E 5DDC,INOPERATIVE PATH 06 > > IOS2001I 5DDC INOPERATIVE PATH 053 > > STATUS FOR PATH(S) 06 > > IN PROCESS OF INITIALIZING PATH (B0) > > NO FURTHER INFORMATION AVAILABLE OR UNKNOWN CONDITION (FF) > > Have you done a DS P,5DDC to see what that indicates? > > Or a D M=CHP(053) > Or a D M=DEV(5DDC) > > How is this device genned? Is it Tape or DASD? What kind of device (IBM DS8000, > TS7740, etc)? > > Have you opened an ETR with IBM or contacted your hardware support vendor? > > > Lizette > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: GET IBM-MAIN INFO Search the archives at > http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
