On Wed, 17 Nov 2010 08:41:22 +0100, Rafal Hanzel <[email protected]> wrote:
>Hi all > >I don't know if I explain it correctly but I will try. > >I have 2 of 4 Ficon card ports configured as a FCP >It's part of my IOCP" >CHPID PATH=(CSS(0),23),SHARED,PARTITION=((LPARVM),(=)), * > PCHID=111,TYPE=FCP >..... >CHPID PATH=(CSS(0),25),SHARED,PARTITION=((LPARVM),(=)), * > PCHID=113,TYPE=FCP >.... >CNTLUNIT CUNUMBR=0054,PATH=((CSS(0),23)),UNIT=FCP >IODEVICE ADDRESS=(5100,240),CUNUMBR=(0054),UNIT=FCP >CNTLUNIT CUNUMBR=0055,PATH=((CSS(0),25)),UNIT=FCP >IODEVICE ADDRESS=(5200,240),CUNUMBR=(0055),UNIT=FCP >.... > >To PCHID 111 we have attached storage system and to PCHID 113 another >storage system. Storage administrator tell me that configurations on >both are the same. > >But we have some problems with one of them. On HMC panels CHANNELS --> >ANALYZE SERIAL LINK STATUS I see: >for PCHID 111 > Device Subchannel > Number Set S_ID Target WWPN D_ID Status > 5100 0 0062562B 500604..... 00AE549C Port Open >and It works perfectly > >for PCHID 113 >Device Subchannel > Number Set S_ID Target WWPN D_ID Status > 5200 0 00E2562B 0000000000000000 00AE548C PLOGI Error > **** * 0062562B 500604..... 00AE549C Port Closed >and it doesn't work :-( > I see for the PCHID 113, you have two target WWPNs in your fabric. Have you checked your NPIV definitions? Roger ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
