Hi Cherep, If you enable graphical boot on a nvidia system, Ubuntu will load nouveau in the initrd completely disregarding the blacklist. Make sure you don't have vga=nnn in your grub commandline. Check /etc/default/grub.
On Mon, Jun 27, 2011 at 15:35, Cherep <[email protected]> wrote: > adding the line "blacklist nouveau" to the end of > /etc/modprobe.d/blacklist.conf doesn't help to prevent the module from > loading at startup. > > After reboot I have > lspci -k > 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M] > (rev a2) > Subsystem: Lenovo Device 3968 > Kernel driver in use: nouveau > Kernel modules: nouveau, nvidiafb > > > 27 июня 2011, 10:07 от Bilal Akhtar <[email protected]>: > > On 06/27/2011 12:02 AM, Cherep wrote: > > > after > > > lspci -k > > > I found "nouveau" as a module. > > > > > > after > > > lsmod | grep nvidia > > > I found nothing. > > > > > > Then I typed > > > sudo rmmod nouveau > > > > > > Now everything is working without freezing! > > > > To prevent the nouveau module from loading up unnecessarily each time, > > just add the line "blacklist nouveau" to the end of > > /etc/modprobe.d/blacklist.conf . > > > > Then you won't have to remove nouveau after every acpi_call to turn the > > dGPU off. > > > > > > > > Joaquín and Aurelgadjo!!! Thank you a lot! > > > > > > 27 июня 2011, 00:10 от Joaquín Ignacio Aramendía<[email protected]>: > > >> Try $ lspci -k > > >> Then you will find the kernel module used by the Nvidia card. Should > be > > >> "nvidia" or "nouveau" > > >> > > >> Then try $ sudo rmmod nouveau > > >> > > >> You can turn off the card without freezing > > >> -- > > >> Joaquín Ignacio Aramendía <[email protected]> > > >> > > >> El dom, 26-06-2011 a las 23:33 +0400, Cherep escribió: > > >>> HI Joaquin, > > >>> > > >>> How can I disable nvidia kernel module? > > >>> > > >>> I tried this > > >>> sudo modprobe -r nvidia > > >>> with reply > > >>> "FATAL: Module nvidia not found." > > >>> > > >>> Thank you! > > >>> > > >>> Cherep > > >>> > > >>> 26 июня 2011, 23:07 от Joaquín Ignacio Aramendía<[email protected] > >: > > >>>> Try to disable nvidia kernel module before turning the card off. > > >>>> That should take care of the freeze issue. > > >>>> > > >>>> By the way. Is there any Dell Vostro 3500 user that could use the > > >>>> automatic power management under bumblebee? I'm having trouble > trying to > > >>>> turn the card ON again and modprobing nvidia. Sometimes it works > fine > > >>>> and sometimes just don't. There where a few times that worked. > > >>>> -- > > >>>> Joaquín Ignacio Aramendía <[email protected]> > > >>>> > > >>>> El dom, 26-06-2011 a las 16:40 +0400, Cherep escribió: > > >>>>> Hi all, > > >>>>> > > >>>>> I got acpi_call working on my Lenovo Z360. I have used method " > > >>>>> \_SB.PCI0.P0P2.PEGP._DSM" to switch nvidia off which is not in > > >>>>> standard test_off.sh. > > >>>>> (How can one add it to test_off.sh?) > > >>>>> > > >>>>> However, when my nvidia card is off, I can't use my USB mouse. Once > I > > >>>>> move the mouse, the screen becomes frozen. Then I can reboot only > > >>>>> using a power button. At the same time, when my nvidia is off, I > can > > >>>>> use a touchpad (works fine). > > >>>>> > > >>>>> Does anybody know how I can handle this problem with my USB mouse? > > >>>>> > > >>>>> Scripts are attached! If something is missing, just let me know! > > >>>>> > > >>>>> Thanks in advance! > > >>>>> > > >>>>> Some info: > > >>>>> Ubuntu 10.10 (64 bit) > > >>>>> > > >>>>> cherep@weekend:~/acpi_call$ sudo dmidecode -s system-product-name > > >>>>> [sudo] password for cherep: > > >>>>> Lenovo IdeaPad Z > > >>>>> cherep@weekend:~/acpi_call$ sudo dmidecode -s system-version > > >>>>> Rev 1.0 > > >>>>> cherep@weekend:~/acpi_call$ lspci -vnnn | perl -lne 'print if /^\d > > >>>>> +\:.+(\[\S+\:\S+\])/' | grep VGA > > >>>>> 00:02.0 VGA compatible controller [0300]: Intel Corporation Core > > >>>>> Processor Integrated Graphics Controller [8086:0046] (rev 12) > (prog-if > > >>>>> 00 [VGA controller]) > > >>>>> 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 > > >>>>> [GeForce 310M] [10de:0a70] (rev ff) (prog-if ff) > > >>>>> > > >>>>> Take care, > > >>>>> Cherep > > >>>>> _______________________________________________ > > >>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux > > >>>>> Post to : [email protected] > > >>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > > >>>>> More help : https://help.launchpad.net/ListHelp > > >>> _______________________________________________ > > >>> Mailing list: https://launchpad.net/~hybrid-graphics-linux > > >>> Post to : [email protected] > > >>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > > >>> More help : https://help.launchpad.net/ListHelp > > > _______________________________________________ > > > Mailing list: https://launchpad.net/~hybrid-graphics-linux > > > Post to : [email protected] > > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > > > More help : https://help.launchpad.net/ListHelp > > > > > > -- > > Bilal Akhtar - Ubuntu Developer <[email protected]> > > IRC nick: cdbs > > > > > > _______________________________________________ > > Mailing list: https://launchpad.net/~hybrid-graphics-linux > > Post to : [email protected] > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > > More help : https://help.launchpad.net/ListHelp > _______________________________________________ > Mailing list: https://launchpad.net/~hybrid-graphics-linux > Post to : [email protected] > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux > More help : https://help.launchpad.net/ListHelp > -- Regards, Tais Plougmann Hansen OSD Consulting ApS Tel: +45 78101078 CVR: DK31332737
_______________________________________________ Mailing list: https://launchpad.net/~hybrid-graphics-linux Post to : [email protected] Unsubscribe : https://launchpad.net/~hybrid-graphics-linux More help : https://help.launchpad.net/ListHelp
