As a first approximation, the point you need to rotate the lens around is where the aperture *appears* to be when you look at the lens from the outside.
With a fisheye like this, this point will vary depending on where you are looking from. So you need to look from the direction where the seam is likely to be: if you plan to take three shot panoramas, look at 60 degrees from the axis of the lens; if you plan two shot panoramas, look for the aperture from the side. -- Bruno On Tue, 4 Feb 2025, 10:09 Bruno Postle wrote: > Also, once you have calibrated your distortion and vignetting parameters > (use four shots for this), you should be able to take good two-shot 360 > panoramas with this setup (but always optimise FoV even if you have 'good' > saved lens parameters). > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99ZgkOmOwUrkSRC1WsHkyEBgC14b9VjwmQX00yhzgBRZ5HQ%40mail.gmail.com.
