| That’s great to hear. I am very curious about what you did that I couldn’t. But first please attach your panorama se we all can see it.
(BTW, I just acquired a new MacBook Pro and am trying to set it up, so please forgive strange emails until I get everything set up.)
No problem.
I've never made a 360-deg pano. I don't
know how to make one at all. So I might simply not be doing it
right in the first place. But the second time I tried, I got a
360-deg panorama from it.
On 8/1/24 17:39, Samuel Rhoads wrote:
I
screwed up. I was pretty sure I had only included the *_1
files, but I see that I did include two _3 files by mistake.
Sorry 'bout that!
But the
12 _1 files: 0_1, 30_1, 60_1 ..., should make a 360 degree
pan.
Yes, I used your zip file, the one in the link below.
It doesn't have 12 images in it, it has 14.
These two images don't have any mountains or ocean in
them: 120_3.jpg and 210_3.jpg. The 210_3 image has a part
of the same beach that's already covered in the 210_1
image.
I think the *_3 images aren't needed, and apparently
you removed them from some other zip file you uploaded to
Google Drive?
I've never made a 360-deg panorama, so I got a
180-degree partial one.
On 8/1/24 13:41, Sam Rhoads wrote:
David: That’s confusing. The 12
images: 0_1 through 330_1, all have either the ocean or
mountains on the horizon. Did you use the zip file that
had all 12 images? If some of those 12 images were
removed, the panorama wouldn’t have been complete?
When I tried the Hugin Assistant, it
found control points on all of them. I don't know
anything about using Translation. I did eventually
get sort-of straight horizon but only after removing
two images that were mostly building foundations
that had no horizon as part of them.
Thanks Carl. Any idea why the
optimizer tab only shows up then? I spent hours
trying to get the optimizer tab to appear There
are so many things that I just do not
understand. I don’t understand how people learn
all these options.
Indeed it couldn't find points for
those images.
The Optimizer tab pops up when you have
Optimize \ Geometric \ Custom Parameters
selected.
Carl: Can you tell me a
little about your experience? Did
Hugin tell you that it couldn’t find
any CPs for 120_1 & 150_1? Did
the Optimizer tab appear? Did the
stitcher report that some images
didn’t belong to the set?
I tried to make a
panorama of your photos but I
failed. After years of using Hugin
I still don't know what I'm doing.
Maybe someone else can give it a
go.
To be clear, I
am hoping that someone in
the community will take the
12 images in this zip file
and try to create a panorama
using Hugin. When I do
that, I get strange error
messages that I do not
understand. The resulting
panorama won’t be
satisfactory for SkySafari,
but at least I’ll find out
what’s causing the errors.
Trying once
again! Forgive an
old stupid man,
please.
--
David W. Jones
[email protected]
wandering the landscape of god
http://dancingtreefrog.com
My password is the last 8 digits of π.
--
A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/7faf9222-51d6-492c-ba74-df3bd1b855d4%40gmail.com.
A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CCA3F9C2-F955-4135-9485-83018B2610F0%40gmail.com.
|
