Ok. It's not really finished. The resulting panorama is not satisfactory. Probably that's why no one commented; didn't want to criticize.
Anyway I decided to start all over again after all. But this time I thought I'd use the original jpegs instead of the pngs. I had gone into Photoshop and created the pngs thinking that would be better. But I now think when I did that, I changed the file size and ended up with much worse resolution than the jpgs even though jpeg is a lossy format. Tell me what you think of that, please. So I started Hugin, chose File -> New, and loaded the 48 jpgs. Then i worked on control points. I selected the images two at a time, choosing images that obviously had overlaps, like 0_1.JPG and 30_1.JPG; 0_1.JPG and 330_1.JPG; 0_1.JPG and 0_2.jpg, etc. (From now on I'll leave off the .JPG) I then opened 0_1 in both the left and right side and tried to add horizontal and vertical CPs. After a lot of time, and eventually selecting eight images at a time rather than just two, I had several thousand CPs. I noticed that there was no Optimizer tab. Didn't know where it had gone. Anyway, when I finally tried to use the stitcher, I got some strange error messages that I didn't understand. Bottom line, no panorama resulted. So I decided to JUST create a panorama with the top row of images: 0_1, 30_1, 60_1, 90_1, ... 330_1. That wouldn't get me the panorama that I needed for SkySafari, but maybe I'd figure out what I was doing wrong. That failed too. For reasons that I do not understand when I tried to create CPs for 120_1 and 150_1, Hugin said it couldn't find any. So I went in and manually found, and created several. This is getting too long. I'm afraid no one will reaqd this and respond, so let me cut to the chase. I am attaching the error log file, Top Level_3.log. Maybe someone can tell me what I did wrong. I am also attaching (hopefully in a manner Claudio recommended) those 12 JPG files. If someone (Claudio?) is willing to try to create a panorama with those 12 files and tell me what happens, I'll appreciate it. On Sun, Jul 28, 2024 at 8:12 PM Samuel Rhoads <[email protected]> wrote: > Ok. I "finished" the panorama. There's a lot I could say, but since it's > "finished", I'll just attach it. > 0_1.JPG <https://drive.google.com/file/d/11fnQ2lkKjkUHlh__uGhZJgFt_KVSUCHc/view?usp=drive_web> 30_1.JPG <https://drive.google.com/file/d/18C2pRazNtK1D89tnttl0TUngECH7Lf0e/view?usp=drive_web> 60_1.JPG <https://drive.google.com/file/d/14aKWkGUmFm95yvLe_vNS9wz0bxFvbFff/view?usp=drive_web> 90_1.JPG <https://drive.google.com/file/d/1lO6zJJ52O_b8UveBQd5Q7HnWy-7_YJxC/view?usp=drive_web> 120_1.JPG <https://drive.google.com/file/d/1yuyEX1M9dpSSyh82a9PRhf8V3oI_2aXu/view?usp=drive_web> 150_1.JPG <https://drive.google.com/file/d/1sLQBWt3IbtOYPNQfUyER-gcY3iCZMuP9/view?usp=drive_web> 180_1.JPG <https://drive.google.com/file/d/1SlV4UtwSDt5aFW9IthPSt9uPZk6XpTca/view?usp=drive_web> 210_1.JPG <https://drive.google.com/file/d/14EWAuoJNaxOWCc3OXjtFQZ9D0DI2lZNi/view?usp=drive_web> 240_1.JPG <https://drive.google.com/file/d/1WltNuAaf14xmFgRRiH732__QWyxjrwku/view?usp=drive_web> 270_1.JPG <https://drive.google.com/file/d/11nZEIZp0BsSh_kbvk60khd6rKlCWKmW0/view?usp=drive_web> 300_1.JPG <https://drive.google.com/file/d/1Z5hAQGUJLUMUFQm-26gFXlJPasVFmZp6/view?usp=drive_web> 330_1.JPG <https://drive.google.com/file/d/1p5rV1s4qWq6e8ZuOqE7otIMESqpE70ng/view?usp=drive_web> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CALPc9XfTEwf4g1Us%3D2nOnuPYxV7D4c31KxRuU5fFm8YDf2B7jw%40mail.gmail.com.
Top Level_3.log
Description: Binary data
