Deb, The default port is 5308, not 5306, and you don't want to change it unless you definitely have no choice (say, 5308 is completely occupied in your infrastructure by bad coincidence). But, if you explicitly want to, look at "port" option of control bodies.
2010/12/16 Deb Heller <d...@es.net>: > Hello, > > We will be deploying a remote testbed that will sit on inside a VPN > network. I've had a request that the developers would like to have the > testbed hosts maintained by cfengine. However, the cfengine servers are > outside the VPN network. > > For similar purposes, when accessing a host inside the VPN network, I > have NAT'd ports in the VPN gateway as a tunnel to the target server. > > For example, our Nagios server accesses VPN hosts through a VPN-Gateway > by NAT'ing a port to the target host. To access, one would use the > VPN-GW-IPaddr:PortNumber where the Port Number directs the packets via > the VPN-GW to the appropriate port on the target host. > > A specific port number maps to each target host and the appropriate port > number on that specific target host. It is my understanding that > Cfengine uses port 5306 communicate. But, now I need the cfengine > server to talk to the VPN-GW, to get through to the target host. That > host will actually be represented by the IP addr of the VPN-GW + > PortNumber (representing the target host) which will ultimately be > directed to port 5306 on the target host. > > bintointerface in agent seems to be the closest to what I need, but it > doesn't seem to have the ability to also assign a port. > > Ideas? > > deb > > -- > Deb Heller-Evans 1 Cyclotron Road > Computer Systems Engineer Berkeley, CA 94720 > > > _______________________________________________ > Help-cfengine mailing list > Help-cfengine@cfengine.org > https://cfengine.org/mailman/listinfo/help-cfengine > -- SY, Seva Gluschenko. _______________________________________________ Help-cfengine mailing list Help-cfengine@cfengine.org https://cfengine.org/mailman/listinfo/help-cfengine
