Hi, 2016-04-11 13:57 GMT-03:00 Carlos Eduardo Sotelo Pinto < carlos.sotelo.pi...@gmail.com>:
> Bruno > > I have tested again with a clear enviroment > > > Checking branch > > csotelo@ryojikaji:~/workspace/Tryton/health$ hg branch > default > csotelo@ryojikaji:~/workspace/Tryton/health$ > > I have gotten the log attached, fixed postgresql after delete my box and > start a new clean one, and update my local > > $ vagrant up --provision > Bringing machine 'default' up with 'virtualbox' provider... > ==> default: Box 'gnuhealth' could not be found. Attempting to find and > install... > default: Box Provider: virtualbox > default: Box Version: >= 0 > ==> default: Box file was not detected as metadata. Adding it directly... > ==> default: Adding box 'gnuhealth' (v0) for provider: virtualbox > default: Downloading: > http://puppet-vagrant-boxes.puppetlabs.com/debian-73-x64-virtualbox-puppet.box > ==> default: Box download is resuming from prior download progress > ==> default: Successfully added box 'gnuhealth' (v0) for 'virtualbox'! > ==> default: Importing base box 'gnuhealth'... > ==> default: Matching MAC address for NAT networking... > ==> default: Setting the name of the VM: > vagrant_default_1460391750736_72317 > ==> default: Clearing any previously set network interfaces... > ==> default: Preparing network interfaces based on configuration... > default: Adapter 1: nat > ==> default: Forwarding ports... > default: 8000 (guest) => 8000 (host) (adapter 1) > default: 22 (guest) => 2222 (host) (adapter 1) > ==> default: Running 'pre-boot' VM customizations... > ==> default: Booting VM... > ==> default: Waiting for machine to boot. This may take a few minutes... > default: SSH address: 127.0.0.1:2222 > default: SSH username: vagrant > default: SSH auth method: private key > default: > default: Vagrant insecure key detected. Vagrant will automatically > replace > default: this with a newly generated keypair for better security. > default: > default: Inserting generated public key within guest... > default: Removing insecure key from the guest if it's present... > default: Key inserted! Disconnecting and reconnecting using new SSH > key... > ==> default: Machine booted and ready! > ==> default: Checking for guest additions in VM... > default: The guest additions on this VM do not match the installed > version of > default: VirtualBox! In most cases this is fine, but in rare cases it > can > default: prevent things such as shared folders from working properly. > If you see > default: shared folder errors, please make sure the guest additions > within the > default: virtual machine match the version of VirtualBox you have > installed on > default: your host and reload your VM. > default: > default: Guest Additions Version: 4.3.6 > default: VirtualBox Version: 5.0 > ==> default: Mounting shared folders... > default: /vagrant => /home/csotelo/workspace/Tryton/health/misc/vagrant > default: /srv/gnuhealth => /home/csotelo/workspace/Tryton/health > ==> default: Running provisioner: shell... > default: Running: /tmp/vagrant-shell20160411-7314-7t9tf7.sh > *==> default: stdin: is not a tty* > ==> default: Running bootstrap for Vagrant > ==> default: .. installing firewall > ==> default: Reading package lists... > ==> default: Building dependency tree... > ==> default: Reading state information... > ==> default: iptables is already the newest version. > ==> default: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. > ==> default: .. checking updates > ==> default: Get:1 http://apt.puppetlabs.com wheezy Release.gpg [841 B] > ==> default: Get:2 http://security.debian.org wheezy/updates Release.gpg > [1,554 B] > ==> default: Get:3 http://apt.puppetlabs.com wheezy Release [54.3 kB] > ==> default: Get:4 http://security.debian.org wheezy/updates Release [102 > kB] > ==> default: Get:5 http://apt.puppetlabs.com wheezy/main Sources [90.6 kB] > ==> default: Get:6 http://apt.puppetlabs.com wheezy/dependencies Sources > [9,234 B] > ==> default: Get:7 http://apt.puppetlabs.com wheezy/main amd64 Packages > [107 kB] > ==> default: Get:8 http://security.debian.org wheezy/updates/main Sources > [211 kB] > ==> default: Get:9 http://apt.puppetlabs.com wheezy/dependencies amd64 > Packages [6,422 B] > ==> default: Get:10 http://http.us.debian.org wheezy Release.gpg [2,373 B] > ==> default: Get:11 http://http.us.debian.org wheezy-updates Release.gpg > [1,554 B] > ==> default: Get:12 http://http.us.debian.org wheezy Release [191 kB] > ==> default: Get:13 http://http.us.debian.org wheezy-updates Release [151 > kB] > ==> default: Get:14 http://security.debian.org wheezy/updates/main amd64 > Packages [347 kB] > ==> default: Ign http://apt.puppetlabs.com wheezy/dependencies > Translation-en_US > ==> default: Ign http://apt.puppetlabs.com wheezy/dependencies > Translation-en > ==> default: Ign http://apt.puppetlabs.com wheezy/main Translation-en_US > ==> default: Get:15 http://http.us.debian.org wheezy/main Sources [5,984 > kB] > ==> default: Ign http://apt.puppetlabs.com wheezy/main Translation-en > ==> default: Get:16 http://security.debian.org wheezy/updates/main > Translation-en [202 kB] > ==> default: Get:17 http://http.us.debian.org wheezy/main amd64 Packages > [5,838 kB] > ==> default: Get:18 http://http.us.debian.org wheezy/main Translation-en > [3,846 kB] > ==> default: Get:19 http://http.us.debian.org wheezy-updates/main Sources > [5,516 B] > ==> default: Get:20 http://http.us.debian.org wheezy-updates/main amd64 > Packages/DiffIndex [1,504 B] > ==> default: Get:21 http://http.us.debian.org wheezy-updates/main > Translation-en/DiffIndex [736 B] > ==> default: Get:22 http://http.us.debian.org wheezy-updates/main amd64 > Packages [7,056 B] > ==> default: Get:23 http://http.us.debian.org wheezy-updates/main > Translation-en [4,879 B] > ==> default: Fetched 17.2 MB in 4min 9s (68.9 kB/s) > ==> default: Reading package lists... > *==> default: W: There is no public key available for the following key > IDs:* > *==> default: 9D6D8F6BC857C906* > *==> default: W: There is no public key available for the following key > IDs:* > *==> default: 7638D0442B90D010* > *==> default: W: There is no public key available for the following key > IDs:* > *==> default: 7638D0442B90D010* > ==> default: .. installing python libraries > ==> default: Reading package lists... > ==> default: Building dependency tree... > ==> default: Reading state information... > ==> default: build-essential is already the newest version. > ==> default: The following extra packages will be installed: > ==> default: libexpat1 libexpat1-dev libjpeg8 liblcms1 libldap-2.4-2 > libpython2.7 > ==> default: libssl-dev libssl-doc libssl1.0.0 libxml2 libxslt1.1 > python-pkg-resources > ==> default: python-setuptools python2.7 python2.7-dev python2.7-minimal > zlib1g-dev > ==> default: Suggested packages: > ==> default: liblcms-utils python-imaging-doc python-imaging-dbg > python-ldap-doc > ==> default: python-pyasn1 python-distribute python-distribute-doc > python2.7-doc > ==> default: binfmt-support > ==> default: Recommended packages: > ==> default: python-dev-all > ==> default: The following NEW packages will be installed: > ==> default: libexpat1-dev libjpeg8 liblcms1 libldap2-dev libpython2.7 > libsasl2-dev > ==> default: libssl-dev libssl-doc libxml2-dev libxslt1-dev libxslt1.1 > python-dev > ==> default: python-imaging python-ldap python-pip python-pkg-resources > python-setuptools > ==> default: python2.7-dev zlib1g-dev > ==> default: The following packages will be upgraded: > ==> default: libexpat1 libldap-2.4-2 libssl1.0.0 libxml2 python2.7 > python2.7-minimal > ==> default: 6 upgraded, 19 newly installed, 0 to remove and 110 not > upgraded. > ==> default: Need to get 38.6 MB of archives. > ==> default: After this operation, 56.3 MB of additional disk space will > be used. > ==> default: Get:1 http://http.us.debian.org/debian/ wheezy/main > libssl1.0.0 amd64 1.0.1e-2+deb7u20 [1,263 kB] > ==> default: Get:2 http://security.debian.org/ wheezy/updates/main > libldap-2.4-2 amd64 2.4.31-2+deb7u1 [242 kB] > ==> default: Get:3 http://security.debian.org/ wheezy/updates/main > libldap2-dev amd64 2.4.31-2+deb7u1 [448 kB] > ==> default: Get:4 http://http.us.debian.org/debian/ wheezy/main libxml2 > amd64 2.8.0+dfsg1-7+wheezy5 [906 kB] > ==> default: Get:5 http://http.us.debian.org/debian/ wheezy/main > libexpat1 amd64 2.1.0-1+deb7u2 [139 kB] > ==> default: Get:6 http://http.us.debian.org/debian/ wheezy/main libjpeg8 > amd64 8d-1+deb7u1 [138 kB] > ==> default: Get:7 http://http.us.debian.org/debian/ wheezy/main liblcms1 > amd64 1.19.dfsg2-1.2+deb7u1 [113 kB] > ==> default: Get:8 http://http.us.debian.org/debian/ wheezy/main > libxslt1.1 amd64 1.1.26-14.1 [254 kB] > ==> default: Get:9 http://http.us.debian.org/debian/ wheezy/main > python2.7 amd64 2.7.3-6+deb7u2 [2,728 kB] > ==> default: Get:10 http://http.us.debian.org/debian/ wheezy/main > python2.7-minimal amd64 2.7.3-6+deb7u2 [1,785 kB] > ==> default: Get:11 http://http.us.debian.org/debian/ wheezy/main > libexpat1-dev amd64 2.1.0-1+deb7u2 [222 kB] > ==> default: Get:12 http://http.us.debian.org/debian/ wheezy/main > libpython2.7 amd64 2.7.3-6+deb7u2 [1,207 kB] > ==> default: Get:13 http://http.us.debian.org/debian/ wheezy/main > libsasl2-dev amd64 2.1.25.dfsg1-6+deb7u1 [360 kB] > ==> default: Get:14 http://http.us.debian.org/debian/ wheezy/main > zlib1g-dev amd64 1:1.2.7.dfsg-13 [215 kB] > ==> default: Get:15 http://http.us.debian.org/debian/ wheezy/main > libssl-dev amd64 1.0.1e-2+deb7u20 [1,759 kB] > ==> default: Get:16 http://http.us.debian.org/debian/ wheezy/main > libssl-doc all 1.0.1e-2+deb7u20 [1,198 kB] > ==> default: Get:17 http://http.us.debian.org/debian/ wheezy/main > libxml2-dev amd64 2.8.0+dfsg1-7+wheezy5 [904 kB] > ==> default: Get:18 http://http.us.debian.org/debian/ wheezy/main > libxslt1-dev amd64 1.1.26-14.1 [681 kB] > ==> default: Get:19 http://http.us.debian.org/debian/ wheezy/main > python2.7-dev amd64 2.7.3-6+deb7u2 [22.8 MB] > ==> default: Get:20 http://http.us.debian.org/debian/ wheezy/main > python-dev all 2.7.3-4+deb7u1 [920 B] > ==> default: Get:21 http://http.us.debian.org/debian/ wheezy/main > python-imaging amd64 1.1.7-4+deb7u2 [460 kB] > ==> default: Get:22 http://http.us.debian.org/debian/ wheezy/main > python-ldap amd64 2.4.10-1 [120 kB] > ==> default: Get:23 http://http.us.debian.org/debian/ wheezy/main > python-pkg-resources all 0.6.24-1 [63.6 kB] > ==> default: Get:24 http://http.us.debian.org/debian/ wheezy/main > python-setuptools all 0.6.24-1 [449 kB] > ==> default: Get:25 http://http.us.debian.org/debian/ wheezy/main > python-pip all 1.1-3 [112 kB] > ==> default: Reading changelogs... > ==> default: Preconfiguring packages ... > ==> default: Fetched 38.6 MB in 11min 40s (55.0 kB/s) > ==> default: (Reading database ... > ==> default: 59203 files and directories currently installed.) > ==> default: Preparing to replace libssl1.0.0:amd64 1.0.1e-2+deb7u3 (using > .../libssl1.0.0_1.0.1e-2+deb7u20_amd64.deb) ... > ==> default: Unpacking replacement libssl1.0.0:amd64 ... > ==> default: Preparing to replace libxml2:amd64 2.8.0+dfsg1-7+nmu2 (using > .../libxml2_2.8.0+dfsg1-7+wheezy5_amd64.deb) ... > ==> default: Unpacking replacement libxml2:amd64 ... > ==> default: Preparing to replace libexpat1:amd64 2.1.0-1+deb7u1 (using > .../libexpat1_2.1.0-1+deb7u2_amd64.deb) ... > ==> default: Unpacking replacement libexpat1:amd64 ... > ==> default: Selecting previously unselected package libjpeg8:amd64. > ==> default: Unpacking libjpeg8:amd64 (from > .../libjpeg8_8d-1+deb7u1_amd64.deb) ... > ==> default: Selecting previously unselected package liblcms1:amd64. > ==> default: Unpacking liblcms1:amd64 (from > .../liblcms1_1.19.dfsg2-1.2+deb7u1_amd64.deb) ... > ==> default: Preparing to replace libldap-2.4-2:amd64 2.4.31-1+nmu2 (using > .../libldap-2.4-2_2.4.31-2+deb7u1_amd64.deb) ... > ==> default: Unpacking replacement libldap-2.4-2:amd64 ... > ==> default: Selecting previously unselected package libxslt1.1:amd64. > ==> default: Unpacking libxslt1.1:amd64 (from > .../libxslt1.1_1.1.26-14.1_amd64.deb) ... > ==> default: Preparing to replace python2.7 2.7.3-6 (using > .../python2.7_2.7.3-6+deb7u2_amd64.deb) ... > ==> default: Unpacking replacement python2.7 ... > ==> default: Preparing to replace python2.7-minimal 2.7.3-6 (using > .../python2.7-minimal_2.7.3-6+deb7u2_amd64.deb) ... > ==> default: Unpacking replacement python2.7-minimal ... > ==> default: Selecting previously unselected package libexpat1-dev. > ==> default: Unpacking libexpat1-dev (from > .../libexpat1-dev_2.1.0-1+deb7u2_amd64.deb) ... > ==> default: Selecting previously unselected package libpython2.7. > ==> default: Unpacking libpython2.7 (from > .../libpython2.7_2.7.3-6+deb7u2_amd64.deb) ... > ==> default: Selecting previously unselected package libsasl2-dev. > ==> default: Unpacking libsasl2-dev (from > .../libsasl2-dev_2.1.25.dfsg1-6+deb7u1_amd64.deb) ... > ==> default: Selecting previously unselected package zlib1g-dev:amd64. > ==> default: Unpacking zlib1g-dev:amd64 (from > .../zlib1g-dev_1%3a1.2.7.dfsg-13_amd64.deb) ... > ==> default: Selecting previously unselected package libssl-dev. > ==> default: Unpacking libssl-dev (from > .../libssl-dev_1.0.1e-2+deb7u20_amd64.deb) ... > ==> default: Selecting previously unselected package libssl-doc. > ==> default: Unpacking libssl-doc (from > .../libssl-doc_1.0.1e-2+deb7u20_all.deb) ... > ==> default: Selecting previously unselected package libxml2-dev:amd64. > ==> default: Unpacking libxml2-dev:amd64 (from > .../libxml2-dev_2.8.0+dfsg1-7+wheezy5_amd64.deb) ... > ==> default: Selecting previously unselected package libxslt1-dev. > ==> default: Unpacking libxslt1-dev (from > .../libxslt1-dev_1.1.26-14.1_amd64.deb) ... > ==> default: Selecting previously unselected package python2.7-dev. > ==> default: Unpacking python2.7-dev (from > .../python2.7-dev_2.7.3-6+deb7u2_amd64.deb) ... > ==> default: Selecting previously unselected package python-dev. > ==> default: Unpacking python-dev (from > .../python-dev_2.7.3-4+deb7u1_all.deb) ... > ==> default: Selecting previously unselected package python-imaging. > ==> default: Unpacking python-imaging (from > .../python-imaging_1.1.7-4+deb7u2_amd64.deb) ... > ==> default: Selecting previously unselected package python-ldap. > ==> default: Unpacking python-ldap (from > .../python-ldap_2.4.10-1_amd64.deb) ... > ==> default: Selecting previously unselected package python-pkg-resources. > ==> default: Unpacking python-pkg-resources (from > .../python-pkg-resources_0.6.24-1_all.deb) ... > ==> default: Selecting previously unselected package python-setuptools. > ==> default: Unpacking python-setuptools (from > .../python-setuptools_0.6.24-1_all.deb) ... > ==> default: Selecting previously unselected package python-pip. > ==> default: Unpacking python-pip (from .../python-pip_1.1-3_all.deb) ... > ==> default: Selecting previously unselected package libldap2-dev:amd64. > ==> default: Unpacking libldap2-dev:amd64 (from > .../libldap2-dev_2.4.31-2+deb7u1_amd64.deb) ... > ==> default: Processing triggers for man-db ... > ==> default: Setting up libssl1.0.0:amd64 (1.0.1e-2+deb7u20) ... > ==> default: Checking for services that may need to be restarted... > ==> default: done. > ==> default: Checking for services that may need to be restarted... > ==> default: done. > ==> default: Checking init scripts... > ==> default: > ==> default: Restarting services possibly affected by the upgrade: > ==> default: Restarting puppet agent > ==> default: > ==> default: puppet not configured to start, please edit > /etc/default/puppet to enable > ==> default: . > ==> default: Restarting OpenBSD Secure Shell server: sshd > ==> default: . > ==> default: Stopping NTP server: ntpd > ==> default: . > ==> default: Starting NTP server: ntpd > ==> default: . > ==> default: Stopping MTA for restart: > ==> default: exim4_listener > ==> default: . > ==> default: Restarting MTA: > ==> default: exim4 > ==> default: . > ==> default: > ==> default: Services restarted successfully. > ==> default: Setting up libxml2:amd64 (2.8.0+dfsg1-7+wheezy5) ... > ==> default: Setting up libexpat1:amd64 (2.1.0-1+deb7u2) ... > ==> default: Setting up libjpeg8:amd64 (8d-1+deb7u1) ... > ==> default: Setting up liblcms1:amd64 (1.19.dfsg2-1.2+deb7u1) ... > ==> default: Setting up libldap-2.4-2:amd64 (2.4.31-2+deb7u1) ... > ==> default: Setting up libxslt1.1:amd64 (1.1.26-14.1) ... > ==> default: Setting up python2.7-minimal (2.7.3-6+deb7u2) ... > ==> default: Setting up python2.7 (2.7.3-6+deb7u2) ... > ==> default: Setting up libexpat1-dev (2.1.0-1+deb7u2) ... > ==> default: Setting up libpython2.7 (2.7.3-6+deb7u2) ... > ==> default: Setting up libsasl2-dev (2.1.25.dfsg1-6+deb7u1) ... > ==> default: Setting up zlib1g-dev:amd64 (1:1.2.7.dfsg-13) ... > ==> default: Setting up libssl-dev (1.0.1e-2+deb7u20) ... > ==> default: Setting up libssl-doc (1.0.1e-2+deb7u20) ... > ==> default: Setting up libxml2-dev:amd64 (2.8.0+dfsg1-7+wheezy5) ... > ==> default: Setting up libxslt1-dev (1.1.26-14.1) ... > ==> default: Setting up python2.7-dev (2.7.3-6+deb7u2) ... > ==> default: Setting up python-dev (2.7.3-4+deb7u1) ... > ==> default: Setting up python-imaging (1.1.7-4+deb7u2) ... > ==> default: Setting up python-ldap (2.4.10-1) ... > ==> default: Setting up python-pkg-resources (0.6.24-1) ... > ==> default: Setting up python-setuptools (0.6.24-1) ... > ==> default: Setting up python-pip (1.1-3) ... > ==> default: Setting up libldap2-dev:amd64 (2.4.31-2+deb7u1) ... > ==> default: .. installing PostgreSQL database > ==> default: Generating locales (this might take a while)... > ==> default: en_US.UTF-8 > ==> default: ... > ==> default: done > ==> default: en_US.UTF-8 > ==> default: ... > ==> default: done > ==> default: Generation complete. > ==> default: Reading package lists... > ==> default: Building dependency tree... > ==> default: Reading state information... > ==> default: The following extra packages will be installed: > ==> default: comerr-dev krb5-multidev libcomerr2 libgssapi-krb5-2 > libgssrpc4 libk5crypto3 > ==> default: libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-6 libkrb5-3 > libkrb5-dev > ==> default: libkrb5support0 libpq-dev libpq5 postgresql-9.1 > postgresql-client-9.1 > ==> default: postgresql-client-common postgresql-common ssl-cert > ==> default: Suggested packages: > ==> default: doc-base krb5-doc krb5-user postgresql-doc-9.1 oidentd > ident-server > ==> default: locales-all openssl-blacklist > ==> default: The following NEW packages will be installed: > ==> default: comerr-dev krb5-multidev libgssrpc4 libkadm5clnt-mit8 > libkadm5srv-mit8 > ==> default: libkdb5-6 libkrb5-dev libpq-dev libpq5 postgresql > postgresql-9.1 > ==> default: postgresql-client-9.1 postgresql-client-common > postgresql-common > ==> default: postgresql-server-dev-9.1 ssl-cert > ==> default: The following packages will be upgraded: > ==> default: libcomerr2 libgssapi-krb5-2 libk5crypto3 libkrb5-3 > libkrb5support0 > ==> default: 5 upgraded, 16 newly installed, 0 to remove and 105 not > upgraded. > ==> default: Need to get 6,768 kB of archives. > ==> default: After this operation, 27.6 MB of additional disk space will > be used. > ==> default: Get:1 http://http.us.debian.org/debian/ wheezy/main > libcomerr2 amd64 1.42.5-1.1+deb7u1 [56.1 kB] > ==> default: Get:2 http://http.us.debian.org/debian/ wheezy/main > libk5crypto3 amd64 1.10.1+dfsg-5+deb7u7 [113 kB] > ==> default: Get:3 http://http.us.debian.org/debian/ wheezy/main > libgssapi-krb5-2 amd64 1.10.1+dfsg-5+deb7u7 [150 kB] > ==> default: Get:4 http://http.us.debian.org/debian/ wheezy/main > libkrb5-3 amd64 1.10.1+dfsg-5+deb7u7 [394 kB] > ==> default: Get:5 http://security.debian.org/ wheezy/updates/main libpq5 > amd64 9.1.20-0+deb7u1+b1 [140 kB] > ==> default: Get:6 http://security.debian.org/ wheezy/updates/main > libpq-dev amd64 9.1.20-0+deb7u1+b1 [196 kB] > ==> default: Get:7 http://security.debian.org/ wheezy/updates/main > postgresql-client-9.1 amd64 9.1.20-0+deb7u1+b1 [1,002 kB] > ==> default: Get:8 http://http.us.debian.org/debian/ wheezy/main > libkrb5support0 amd64 1.10.1+dfsg-5+deb7u7 [50.5 kB] > ==> default: Get:9 http://http.us.debian.org/debian/ wheezy/main > libgssrpc4 amd64 1.10.1+dfsg-5+deb7u7 [88.2 kB] > ==> default: Get:10 http://http.us.debian.org/debian/ wheezy/main > libkadm5clnt-mit8 amd64 1.10.1+dfsg-5+deb7u7 [68.7 kB] > ==> default: Get:11 http://http.us.debian.org/debian/ wheezy/main > libkdb5-6 amd64 1.10.1+dfsg-5+deb7u7 [67.8 kB] > ==> default: Get:12 http://http.us.debian.org/debian/ wheezy/main > libkadm5srv-mit8 amd64 1.10.1+dfsg-5+deb7u7 [85.5 kB] > ==> default: Get:13 http://http.us.debian.org/debian/ wheezy/main > comerr-dev amd64 2.1-1.42.5-1.1+deb7u1 [42.8 kB] > ==> default: Get:14 http://http.us.debian.org/debian/ wheezy/main > krb5-multidev amd64 1.10.1+dfsg-5+deb7u7 [154 kB] > ==> default: Get:15 http://http.us.debian.org/debian/ wheezy/main > libkrb5-dev amd64 1.10.1+dfsg-5+deb7u7 [40.4 kB] > ==> default: Get:16 http://http.us.debian.org/debian/ wheezy/main > postgresql-client-common all 134wheezy4 [63.3 kB] > ==> default: Get:17 http://http.us.debian.org/debian/ wheezy/main > ssl-cert all 1.0.32+deb7u1 [19.6 kB] > ==> default: Get:18 http://http.us.debian.org/debian/ wheezy/main > postgresql-common all 134wheezy4 [138 kB] > ==> default: Get:19 http://http.us.debian.org/debian/ wheezy/main > postgresql all 9.1+134wheezy4 [42.5 kB] > ==> default: Get:20 http://security.debian.org/ wheezy/updates/main > postgresql-9.1 amd64 9.1.20-0+deb7u1+b1 [3,301 kB] > ==> default: Get:21 http://security.debian.org/ wheezy/updates/main > postgresql-server-dev-9.1 amd64 9.1.20-0+deb7u1+b1 [556 kB] > ==> default: Reading changelogs... > ==> default: Preconfiguring packages ... > ==> default: Fetched 6,768 kB in 2min 24s (46.8 kB/s) > ==> default: (Reading database ... > ==> default: 62027 files and directories currently installed.) > ==> default: Preparing to replace libcomerr2:amd64 1.42.5-1.1 (using > .../libcomerr2_1.42.5-1.1+deb7u1_amd64.deb) ... > ==> default: Unpacking replacement libcomerr2:amd64 ... > ==> default: Setting up libcomerr2:amd64 (1.42.5-1.1+deb7u1) ... > ==> default: (Reading database ... > ==> default: 62027 files and directories currently installed.) > ==> default: Preparing to replace libk5crypto3:amd64 1.10.1+dfsg-5+deb7u1 > (using .../libk5crypto3_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Unpacking replacement libk5crypto3:amd64 ... > ==> default: Preparing to replace libgssapi-krb5-2:amd64 > 1.10.1+dfsg-5+deb7u1 (using > .../libgssapi-krb5-2_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Unpacking replacement libgssapi-krb5-2:amd64 ... > ==> default: Preparing to replace libkrb5-3:amd64 1.10.1+dfsg-5+deb7u1 > (using .../libkrb5-3_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Unpacking replacement libkrb5-3:amd64 ... > ==> default: Preparing to replace libkrb5support0:amd64 > 1.10.1+dfsg-5+deb7u1 (using > .../libkrb5support0_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Unpacking replacement libkrb5support0:amd64 ... > ==> default: Selecting previously unselected package libgssrpc4:amd64. > ==> default: Unpacking libgssrpc4:amd64 (from > .../libgssrpc4_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package > libkadm5clnt-mit8:amd64. > ==> default: Unpacking libkadm5clnt-mit8:amd64 (from > .../libkadm5clnt-mit8_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package libkdb5-6:amd64. > ==> default: Unpacking libkdb5-6:amd64 (from > .../libkdb5-6_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package > libkadm5srv-mit8:amd64. > ==> default: Unpacking libkadm5srv-mit8:amd64 (from > .../libkadm5srv-mit8_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package comerr-dev. > ==> default: Unpacking comerr-dev (from > .../comerr-dev_2.1-1.42.5-1.1+deb7u1_amd64.deb) ... > ==> default: Selecting previously unselected package krb5-multidev. > ==> default: Unpacking krb5-multidev (from > .../krb5-multidev_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package libpq5. > ==> default: Unpacking libpq5 (from > .../libpq5_9.1.20-0+deb7u1+b1_amd64.deb) ... > ==> default: Selecting previously unselected package libkrb5-dev. > ==> default: Unpacking libkrb5-dev (from > .../libkrb5-dev_1.10.1+dfsg-5+deb7u7_amd64.deb) ... > ==> default: Selecting previously unselected package libpq-dev. > ==> default: Unpacking libpq-dev (from > .../libpq-dev_9.1.20-0+deb7u1+b1_amd64.deb) ... > ==> default: Selecting previously unselected package > postgresql-client-common. > ==> default: Unpacking postgresql-client-common (from > .../postgresql-client-common_134wheezy4_all.deb) ... > ==> default: Selecting previously unselected package postgresql-client-9.1. > ==> default: Unpacking postgresql-client-9.1 (from > .../postgresql-client-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ... > ==> default: Selecting previously unselected package ssl-cert. > ==> default: Unpacking ssl-cert (from .../ssl-cert_1.0.32+deb7u1_all.deb) > ... > ==> default: Selecting previously unselected package postgresql-common. > ==> default: Unpacking postgresql-common (from > .../postgresql-common_134wheezy4_all.deb) ... > ==> default: Adding 'diversion of /usr/bin/pg_config to > /usr/bin/pg_config.libpq-dev by postgresql-common' > ==> default: Selecting previously unselected package postgresql-9.1. > ==> default: Unpacking postgresql-9.1 (from > .../postgresql-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ... > ==> default: Selecting previously unselected package postgresql. > ==> default: Unpacking postgresql (from > .../postgresql_9.1+134wheezy4_all.deb) ... > ==> default: Selecting previously unselected package > postgresql-server-dev-9.1. > ==> default: Unpacking postgresql-server-dev-9.1 (from > .../postgresql-server-dev-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ... > ==> default: Processing triggers for install-info ... > ==> default: Processing triggers for man-db ... > ==> default: Setting up libkrb5support0:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libk5crypto3:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libkrb5-3:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libgssapi-krb5-2:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libgssrpc4:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libkadm5clnt-mit8:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libkdb5-6:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libkadm5srv-mit8:amd64 (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up comerr-dev (2.1-1.42.5-1.1+deb7u1) ... > ==> default: Setting up krb5-multidev (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libpq5 (9.1.20-0+deb7u1+b1) ... > ==> default: Setting up libkrb5-dev (1.10.1+dfsg-5+deb7u7) ... > ==> default: Setting up libpq-dev (9.1.20-0+deb7u1+b1) ... > ==> default: Setting up postgresql-client-common (134wheezy4) ... > ==> default: Setting up postgresql-client-9.1 (9.1.20-0+deb7u1+b1) ... > ==> default: update-alternatives: > ==> default: using /usr/share/postgresql/9.1/man/man1/psql.1.gz to provide > /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode > ==> default: Setting up ssl-cert (1.0.32+deb7u1) ... > ==> default: Setting up postgresql-common (134wheezy4) ... > ==> default: Adding user postgres to group ssl-cert > ==> default: Building PostgreSQL dictionaries from installed > myspell/hunspell packages... > ==> default: Setting up postgresql-9.1 (9.1.20-0+deb7u1+b1) ... > ==> default: Creating new cluster (configuration: > /etc/postgresql/9.1/main, data: /var/lib/postgresql/9.1/main)... > ==> default: Moving configuration file > /var/lib/postgresql/9.1/main/postgresql.conf to /etc/postgresql/9.1/main... > ==> default: Moving configuration file > /var/lib/postgresql/9.1/main/pg_hba.conf to /etc/postgresql/9.1/main... > ==> default: Moving configuration file > /var/lib/postgresql/9.1/main/pg_ident.conf to /etc/postgresql/9.1/main... > ==> default: Configuring postgresql.conf to use port 5432... > ==> default: update-alternatives: > ==> default: using /usr/share/postgresql/9.1/man/man1/postmaster.1.gz to > provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode > ==> default: Starting PostgreSQL 9.1 database server: > ==> default: main > ==> default: . > ==> default: Setting up postgresql (9.1+134wheezy4) ... > ==> default: Setting up postgresql-server-dev-9.1 (9.1.20-0+deb7u1+b1) ... > ==> default: .. creating the database user > ==> default: .. starting GNU Health installer > *==> default: bash: ./gnuhealth_install.sh: No such file or directory* > *==> default: .. enabling the BASH environment for the vagrant user* > *==> default: ls: * > *==> default: cannot access > /home/vagrant/gnuhealth/tryton/server/trytond-** > *==> default: : No such file or directory* > *==> default: cat: * > *==> default: /home/vagrant/gnuhealth/version* > *==> default: : No such file or directory* > *==> default: Done.* > > > > 2016-04-11 11:03 GMT-05:00 Carlos Eduardo Sotelo Pinto < > carlos.sotelo.pi...@gmail.com>: > >> Hello Bruno >> >> thanks a lot, I will delete the box and generate it again in order on >> having a clear install box >> >> best regards >> >> 2016-04-11 10:47 GMT-05:00 Luis Falcon <fal...@gnu.org>: >> >>> Hi Bruno >>> On Mon, 11 Apr 2016 12:41:15 -0300 >>> "Bruno M. Villasanti" <bvillasa...@thymbra.com> wrote: >>> >>> > Hi Carlos and Luis, >>> > >>> > 2016-04-09 7:44 GMT-03:00 Luis Falcon <fal...@gnu.org>: >>> > >>> > > Hi Carlos ! >>> > > >>> > > On Fri, 8 Apr 2016 12:06:39 -0500 >>> > > Carlos Eduardo Sotelo Pinto <carlos.sotelo.pi...@gmail.com> wrote: >>> > > >>> > > > Dear Coders >>> > > > >>> > > > I have found this error on the vagran on the default branch >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > *==> default: E==> default: : ==> default: Unable to locate >>> > > > package postgresql-server-dev-9.1==> default: E==> default: : ==> >>> > > > default: Couldn't find any package by regex >>> > > > 'postgresql-server-dev-9.1'* After checking the provision file I >>> > > > have found >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > *$ cat misc/vagrant/scripts/vagrant_bootstrap.sh | grep >>> > > > postgresapt-get install -y postgresql postgresql-server-dev-9.1su >>> > > > - postgres -c "createuser --createdb --no-createrole >>> > > > --no-superuser vagrant"* and this is no completely agree withe >>> > > > the box version >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > *$ apt-cache search postgresql | grep server | grep >>> > > > devpostgresql-server-dev-9.4 - development files for PostgreSQL >>> > > > 9.4 server-side programmingpostgresql-server-dev-all - extension >>> > > > build tool for multiple PostgreSQL versions* >>> > > > >>> > > > I suggest an update on the privision script >>> > > > >>> > > Tom Dunlap and Bruno Villasanti have been the ones involved in >>> > > Vagrant. >>> > > >>> > > Bruno, can you take a look a this and push it to Hg , please ? >>> > > >>> > >>> > PostgreSQL version is related to the debian box given in the >>> > Vagrantfile. >>> > >>> > config.vm.box_url = ' >>> > >>> http://puppet-vagrant-boxes.puppetlabs.com/debian-73-x64-virtualbox-puppet.box >>> ' >>> > >>> > >>> > I think Debian 7.x (wheezy) still using PostgreSQL 9.1. >>> > >>> > And using the script on another box, presumably it will give >>> > dependencies errors. >>> > >>> > >>> > But as you suggests, and considering that Vagrant is used to test the >>> > development environment of GNU Health, would be very good idea to >>> > update both the Box as PostgreSQL to their stable versions. >>> > >>> > So, I will perform the tests on a clean environment before confirm >>> > the changes. >>> > >>> >>> Thanks a lot, and let us know how the tests go. >>> >>> Bests >>> >>> > >>> > Regards. >>> > >>> >>> >>> >> >> >> -- >> Carlos Eduardo Sotelo Pinto >> Senior Software Analyst Developer >> Claro RPC +51983265994 | MOV RPM( # ) +51 966110066 >> GTalk: carlos.sotelo.pi...@gmail.com | Skype: csotelop >> GNULinux RU #379182 | GNULinux RM #277661 >> >> No availability between 08:30 and 18:00, I will answer as soon as posible >> >> Please consider the environment before printing this email >> Join the campaign at http://thinkBeforePrinting.org >> > > > > -- > Carlos Eduardo Sotelo Pinto > Senior Software Analyst Developer > Claro RPC +51983265994 | MOV RPM( # ) +51 966110066 > GTalk: carlos.sotelo.pi...@gmail.com | Skype: csotelop > GNULinux RU #379182 | GNULinux RM #277661 > > No availability between 08:30 and 18:00, I will answer as soon as posible > > Please consider the environment before printing this email > Join the campaign at http://thinkBeforePrinting.org > I created a task in Savannah [1] to report about progress in adapting the script. Since many errors jumping during installation attempts which I estimate need to be reformulated. Regards. -- [1] https://savannah.gnu.org/task/index.php?13960 <https://savannah.gnu.org/task/index.php?13960%E2%80%8B> -- Bruno M. Villasanti thymbr@
