Bruno
I have tested again with a clear enviroment
Checking branch
csotelo@ryojikaji:~/workspace/Tryton/health$ hg branch
default
csotelo@ryojikaji:~/workspace/Tryton/health$
I have gotten the log attached, fixed postgresql after delete my box and
start a new clean one, and update my local
$ vagrant up --provision
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Box 'gnuhealth' could not be found. Attempting to find and
install...
default: Box Provider: virtualbox
default: Box Version: >= 0
==> default: Box file was not detected as metadata. Adding it directly...
==> default: Adding box 'gnuhealth' (v0) for provider: virtualbox
default: Downloading:
http://puppet-vagrant-boxes.puppetlabs.com/debian-73-x64-virtualbox-puppet.box
==> default: Box download is resuming from prior download progress
==> default: Successfully added box 'gnuhealth' (v0) for 'virtualbox'!
==> default: Importing base box 'gnuhealth'...
==> default: Matching MAC address for NAT networking...
==> default: Setting the name of the VM: vagrant_default_1460391750736_72317
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 8000 (guest) => 8000 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default:
default: Vagrant insecure key detected. Vagrant will automatically
replace
default: this with a newly generated keypair for better security.
default:
default: Inserting generated public key within guest...
default: Removing insecure key from the guest if it's present...
default: Key inserted! Disconnecting and reconnecting using new SSH
key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
default: The guest additions on this VM do not match the installed
version of
default: VirtualBox! In most cases this is fine, but in rare cases it
can
default: prevent things such as shared folders from working properly.
If you see
default: shared folder errors, please make sure the guest additions
within the
default: virtual machine match the version of VirtualBox you have
installed on
default: your host and reload your VM.
default:
default: Guest Additions Version: 4.3.6
default: VirtualBox Version: 5.0
==> default: Mounting shared folders...
default: /vagrant => /home/csotelo/workspace/Tryton/health/misc/vagrant
default: /srv/gnuhealth => /home/csotelo/workspace/Tryton/health
==> default: Running provisioner: shell...
default: Running: /tmp/vagrant-shell20160411-7314-7t9tf7.sh
*==> default: stdin: is not a tty*
==> default: Running bootstrap for Vagrant
==> default: .. installing firewall
==> default: Reading package lists...
==> default: Building dependency tree...
==> default: Reading state information...
==> default: iptables is already the newest version.
==> default: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
==> default: .. checking updates
==> default: Get:1 http://apt.puppetlabs.com wheezy Release.gpg [841 B]
==> default: Get:2 http://security.debian.org wheezy/updates Release.gpg
[1,554 B]
==> default: Get:3 http://apt.puppetlabs.com wheezy Release [54.3 kB]
==> default: Get:4 http://security.debian.org wheezy/updates Release [102
kB]
==> default: Get:5 http://apt.puppetlabs.com wheezy/main Sources [90.6 kB]
==> default: Get:6 http://apt.puppetlabs.com wheezy/dependencies Sources
[9,234 B]
==> default: Get:7 http://apt.puppetlabs.com wheezy/main amd64 Packages
[107 kB]
==> default: Get:8 http://security.debian.org wheezy/updates/main Sources
[211 kB]
==> default: Get:9 http://apt.puppetlabs.com wheezy/dependencies amd64
Packages [6,422 B]
==> default: Get:10 http://http.us.debian.org wheezy Release.gpg [2,373 B]
==> default: Get:11 http://http.us.debian.org wheezy-updates Release.gpg
[1,554 B]
==> default: Get:12 http://http.us.debian.org wheezy Release [191 kB]
==> default: Get:13 http://http.us.debian.org wheezy-updates Release [151
kB]
==> default: Get:14 http://security.debian.org wheezy/updates/main amd64
Packages [347 kB]
==> default: Ign http://apt.puppetlabs.com wheezy/dependencies
Translation-en_US
==> default: Ign http://apt.puppetlabs.com wheezy/dependencies
Translation-en
==> default: Ign http://apt.puppetlabs.com wheezy/main Translation-en_US
==> default: Get:15 http://http.us.debian.org wheezy/main Sources [5,984 kB]
==> default: Ign http://apt.puppetlabs.com wheezy/main Translation-en
==> default: Get:16 http://security.debian.org wheezy/updates/main
Translation-en [202 kB]
==> default: Get:17 http://http.us.debian.org wheezy/main amd64 Packages
[5,838 kB]
==> default: Get:18 http://http.us.debian.org wheezy/main Translation-en
[3,846 kB]
==> default: Get:19 http://http.us.debian.org wheezy-updates/main Sources
[5,516 B]
==> default: Get:20 http://http.us.debian.org wheezy-updates/main amd64
Packages/DiffIndex [1,504 B]
==> default: Get:21 http://http.us.debian.org wheezy-updates/main
Translation-en/DiffIndex [736 B]
==> default: Get:22 http://http.us.debian.org wheezy-updates/main amd64
Packages [7,056 B]
==> default: Get:23 http://http.us.debian.org wheezy-updates/main
Translation-en [4,879 B]
==> default: Fetched 17.2 MB in 4min 9s (68.9 kB/s)
==> default: Reading package lists...
*==> default: W: There is no public key available for the following key
IDs:*
*==> default: 9D6D8F6BC857C906*
*==> default: W: There is no public key available for the following key
IDs:*
*==> default: 7638D0442B90D010*
*==> default: W: There is no public key available for the following key
IDs:*
*==> default: 7638D0442B90D010*
==> default: .. installing python libraries
==> default: Reading package lists...
==> default: Building dependency tree...
==> default: Reading state information...
==> default: build-essential is already the newest version.
==> default: The following extra packages will be installed:
==> default: libexpat1 libexpat1-dev libjpeg8 liblcms1 libldap-2.4-2
libpython2.7
==> default: libssl-dev libssl-doc libssl1.0.0 libxml2 libxslt1.1
python-pkg-resources
==> default: python-setuptools python2.7 python2.7-dev python2.7-minimal
zlib1g-dev
==> default: Suggested packages:
==> default: liblcms-utils python-imaging-doc python-imaging-dbg
python-ldap-doc
==> default: python-pyasn1 python-distribute python-distribute-doc
python2.7-doc
==> default: binfmt-support
==> default: Recommended packages:
==> default: python-dev-all
==> default: The following NEW packages will be installed:
==> default: libexpat1-dev libjpeg8 liblcms1 libldap2-dev libpython2.7
libsasl2-dev
==> default: libssl-dev libssl-doc libxml2-dev libxslt1-dev libxslt1.1
python-dev
==> default: python-imaging python-ldap python-pip python-pkg-resources
python-setuptools
==> default: python2.7-dev zlib1g-dev
==> default: The following packages will be upgraded:
==> default: libexpat1 libldap-2.4-2 libssl1.0.0 libxml2 python2.7
python2.7-minimal
==> default: 6 upgraded, 19 newly installed, 0 to remove and 110 not
upgraded.
==> default: Need to get 38.6 MB of archives.
==> default: After this operation, 56.3 MB of additional disk space will be
used.
==> default: Get:1 http://http.us.debian.org/debian/ wheezy/main
libssl1.0.0 amd64 1.0.1e-2+deb7u20 [1,263 kB]
==> default: Get:2 http://security.debian.org/ wheezy/updates/main
libldap-2.4-2 amd64 2.4.31-2+deb7u1 [242 kB]
==> default: Get:3 http://security.debian.org/ wheezy/updates/main
libldap2-dev amd64 2.4.31-2+deb7u1 [448 kB]
==> default: Get:4 http://http.us.debian.org/debian/ wheezy/main libxml2
amd64 2.8.0+dfsg1-7+wheezy5 [906 kB]
==> default: Get:5 http://http.us.debian.org/debian/ wheezy/main libexpat1
amd64 2.1.0-1+deb7u2 [139 kB]
==> default: Get:6 http://http.us.debian.org/debian/ wheezy/main libjpeg8
amd64 8d-1+deb7u1 [138 kB]
==> default: Get:7 http://http.us.debian.org/debian/ wheezy/main liblcms1
amd64 1.19.dfsg2-1.2+deb7u1 [113 kB]
==> default: Get:8 http://http.us.debian.org/debian/ wheezy/main libxslt1.1
amd64 1.1.26-14.1 [254 kB]
==> default: Get:9 http://http.us.debian.org/debian/ wheezy/main python2.7
amd64 2.7.3-6+deb7u2 [2,728 kB]
==> default: Get:10 http://http.us.debian.org/debian/ wheezy/main
python2.7-minimal amd64 2.7.3-6+deb7u2 [1,785 kB]
==> default: Get:11 http://http.us.debian.org/debian/ wheezy/main
libexpat1-dev amd64 2.1.0-1+deb7u2 [222 kB]
==> default: Get:12 http://http.us.debian.org/debian/ wheezy/main
libpython2.7 amd64 2.7.3-6+deb7u2 [1,207 kB]
==> default: Get:13 http://http.us.debian.org/debian/ wheezy/main
libsasl2-dev amd64 2.1.25.dfsg1-6+deb7u1 [360 kB]
==> default: Get:14 http://http.us.debian.org/debian/ wheezy/main
zlib1g-dev amd64 1:1.2.7.dfsg-13 [215 kB]
==> default: Get:15 http://http.us.debian.org/debian/ wheezy/main
libssl-dev amd64 1.0.1e-2+deb7u20 [1,759 kB]
==> default: Get:16 http://http.us.debian.org/debian/ wheezy/main
libssl-doc all 1.0.1e-2+deb7u20 [1,198 kB]
==> default: Get:17 http://http.us.debian.org/debian/ wheezy/main
libxml2-dev amd64 2.8.0+dfsg1-7+wheezy5 [904 kB]
==> default: Get:18 http://http.us.debian.org/debian/ wheezy/main
libxslt1-dev amd64 1.1.26-14.1 [681 kB]
==> default: Get:19 http://http.us.debian.org/debian/ wheezy/main
python2.7-dev amd64 2.7.3-6+deb7u2 [22.8 MB]
==> default: Get:20 http://http.us.debian.org/debian/ wheezy/main
python-dev all 2.7.3-4+deb7u1 [920 B]
==> default: Get:21 http://http.us.debian.org/debian/ wheezy/main
python-imaging amd64 1.1.7-4+deb7u2 [460 kB]
==> default: Get:22 http://http.us.debian.org/debian/ wheezy/main
python-ldap amd64 2.4.10-1 [120 kB]
==> default: Get:23 http://http.us.debian.org/debian/ wheezy/main
python-pkg-resources all 0.6.24-1 [63.6 kB]
==> default: Get:24 http://http.us.debian.org/debian/ wheezy/main
python-setuptools all 0.6.24-1 [449 kB]
==> default: Get:25 http://http.us.debian.org/debian/ wheezy/main
python-pip all 1.1-3 [112 kB]
==> default: Reading changelogs...
==> default: Preconfiguring packages ...
==> default: Fetched 38.6 MB in 11min 40s (55.0 kB/s)
==> default: (Reading database ...
==> default: 59203 files and directories currently installed.)
==> default: Preparing to replace libssl1.0.0:amd64 1.0.1e-2+deb7u3 (using
.../libssl1.0.0_1.0.1e-2+deb7u20_amd64.deb) ...
==> default: Unpacking replacement libssl1.0.0:amd64 ...
==> default: Preparing to replace libxml2:amd64 2.8.0+dfsg1-7+nmu2 (using
.../libxml2_2.8.0+dfsg1-7+wheezy5_amd64.deb) ...
==> default: Unpacking replacement libxml2:amd64 ...
==> default: Preparing to replace libexpat1:amd64 2.1.0-1+deb7u1 (using
.../libexpat1_2.1.0-1+deb7u2_amd64.deb) ...
==> default: Unpacking replacement libexpat1:amd64 ...
==> default: Selecting previously unselected package libjpeg8:amd64.
==> default: Unpacking libjpeg8:amd64 (from
.../libjpeg8_8d-1+deb7u1_amd64.deb) ...
==> default: Selecting previously unselected package liblcms1:amd64.
==> default: Unpacking liblcms1:amd64 (from
.../liblcms1_1.19.dfsg2-1.2+deb7u1_amd64.deb) ...
==> default: Preparing to replace libldap-2.4-2:amd64 2.4.31-1+nmu2 (using
.../libldap-2.4-2_2.4.31-2+deb7u1_amd64.deb) ...
==> default: Unpacking replacement libldap-2.4-2:amd64 ...
==> default: Selecting previously unselected package libxslt1.1:amd64.
==> default: Unpacking libxslt1.1:amd64 (from
.../libxslt1.1_1.1.26-14.1_amd64.deb) ...
==> default: Preparing to replace python2.7 2.7.3-6 (using
.../python2.7_2.7.3-6+deb7u2_amd64.deb) ...
==> default: Unpacking replacement python2.7 ...
==> default: Preparing to replace python2.7-minimal 2.7.3-6 (using
.../python2.7-minimal_2.7.3-6+deb7u2_amd64.deb) ...
==> default: Unpacking replacement python2.7-minimal ...
==> default: Selecting previously unselected package libexpat1-dev.
==> default: Unpacking libexpat1-dev (from
.../libexpat1-dev_2.1.0-1+deb7u2_amd64.deb) ...
==> default: Selecting previously unselected package libpython2.7.
==> default: Unpacking libpython2.7 (from
.../libpython2.7_2.7.3-6+deb7u2_amd64.deb) ...
==> default: Selecting previously unselected package libsasl2-dev.
==> default: Unpacking libsasl2-dev (from
.../libsasl2-dev_2.1.25.dfsg1-6+deb7u1_amd64.deb) ...
==> default: Selecting previously unselected package zlib1g-dev:amd64.
==> default: Unpacking zlib1g-dev:amd64 (from
.../zlib1g-dev_1%3a1.2.7.dfsg-13_amd64.deb) ...
==> default: Selecting previously unselected package libssl-dev.
==> default: Unpacking libssl-dev (from
.../libssl-dev_1.0.1e-2+deb7u20_amd64.deb) ...
==> default: Selecting previously unselected package libssl-doc.
==> default: Unpacking libssl-doc (from
.../libssl-doc_1.0.1e-2+deb7u20_all.deb) ...
==> default: Selecting previously unselected package libxml2-dev:amd64.
==> default: Unpacking libxml2-dev:amd64 (from
.../libxml2-dev_2.8.0+dfsg1-7+wheezy5_amd64.deb) ...
==> default: Selecting previously unselected package libxslt1-dev.
==> default: Unpacking libxslt1-dev (from
.../libxslt1-dev_1.1.26-14.1_amd64.deb) ...
==> default: Selecting previously unselected package python2.7-dev.
==> default: Unpacking python2.7-dev (from
.../python2.7-dev_2.7.3-6+deb7u2_amd64.deb) ...
==> default: Selecting previously unselected package python-dev.
==> default: Unpacking python-dev (from
.../python-dev_2.7.3-4+deb7u1_all.deb) ...
==> default: Selecting previously unselected package python-imaging.
==> default: Unpacking python-imaging (from
.../python-imaging_1.1.7-4+deb7u2_amd64.deb) ...
==> default: Selecting previously unselected package python-ldap.
==> default: Unpacking python-ldap (from
.../python-ldap_2.4.10-1_amd64.deb) ...
==> default: Selecting previously unselected package python-pkg-resources.
==> default: Unpacking python-pkg-resources (from
.../python-pkg-resources_0.6.24-1_all.deb) ...
==> default: Selecting previously unselected package python-setuptools.
==> default: Unpacking python-setuptools (from
.../python-setuptools_0.6.24-1_all.deb) ...
==> default: Selecting previously unselected package python-pip.
==> default: Unpacking python-pip (from .../python-pip_1.1-3_all.deb) ...
==> default: Selecting previously unselected package libldap2-dev:amd64.
==> default: Unpacking libldap2-dev:amd64 (from
.../libldap2-dev_2.4.31-2+deb7u1_amd64.deb) ...
==> default: Processing triggers for man-db ...
==> default: Setting up libssl1.0.0:amd64 (1.0.1e-2+deb7u20) ...
==> default: Checking for services that may need to be restarted...
==> default: done.
==> default: Checking for services that may need to be restarted...
==> default: done.
==> default: Checking init scripts...
==> default:
==> default: Restarting services possibly affected by the upgrade:
==> default: Restarting puppet agent
==> default:
==> default: puppet not configured to start, please edit
/etc/default/puppet to enable
==> default: .
==> default: Restarting OpenBSD Secure Shell server: sshd
==> default: .
==> default: Stopping NTP server: ntpd
==> default: .
==> default: Starting NTP server: ntpd
==> default: .
==> default: Stopping MTA for restart:
==> default: exim4_listener
==> default: .
==> default: Restarting MTA:
==> default: exim4
==> default: .
==> default:
==> default: Services restarted successfully.
==> default: Setting up libxml2:amd64 (2.8.0+dfsg1-7+wheezy5) ...
==> default: Setting up libexpat1:amd64 (2.1.0-1+deb7u2) ...
==> default: Setting up libjpeg8:amd64 (8d-1+deb7u1) ...
==> default: Setting up liblcms1:amd64 (1.19.dfsg2-1.2+deb7u1) ...
==> default: Setting up libldap-2.4-2:amd64 (2.4.31-2+deb7u1) ...
==> default: Setting up libxslt1.1:amd64 (1.1.26-14.1) ...
==> default: Setting up python2.7-minimal (2.7.3-6+deb7u2) ...
==> default: Setting up python2.7 (2.7.3-6+deb7u2) ...
==> default: Setting up libexpat1-dev (2.1.0-1+deb7u2) ...
==> default: Setting up libpython2.7 (2.7.3-6+deb7u2) ...
==> default: Setting up libsasl2-dev (2.1.25.dfsg1-6+deb7u1) ...
==> default: Setting up zlib1g-dev:amd64 (1:1.2.7.dfsg-13) ...
==> default: Setting up libssl-dev (1.0.1e-2+deb7u20) ...
==> default: Setting up libssl-doc (1.0.1e-2+deb7u20) ...
==> default: Setting up libxml2-dev:amd64 (2.8.0+dfsg1-7+wheezy5) ...
==> default: Setting up libxslt1-dev (1.1.26-14.1) ...
==> default: Setting up python2.7-dev (2.7.3-6+deb7u2) ...
==> default: Setting up python-dev (2.7.3-4+deb7u1) ...
==> default: Setting up python-imaging (1.1.7-4+deb7u2) ...
==> default: Setting up python-ldap (2.4.10-1) ...
==> default: Setting up python-pkg-resources (0.6.24-1) ...
==> default: Setting up python-setuptools (0.6.24-1) ...
==> default: Setting up python-pip (1.1-3) ...
==> default: Setting up libldap2-dev:amd64 (2.4.31-2+deb7u1) ...
==> default: .. installing PostgreSQL database
==> default: Generating locales (this might take a while)...
==> default: en_US.UTF-8
==> default: ...
==> default: done
==> default: en_US.UTF-8
==> default: ...
==> default: done
==> default: Generation complete.
==> default: Reading package lists...
==> default: Building dependency tree...
==> default: Reading state information...
==> default: The following extra packages will be installed:
==> default: comerr-dev krb5-multidev libcomerr2 libgssapi-krb5-2
libgssrpc4 libk5crypto3
==> default: libkadm5clnt-mit8 libkadm5srv-mit8 libkdb5-6 libkrb5-3
libkrb5-dev
==> default: libkrb5support0 libpq-dev libpq5 postgresql-9.1
postgresql-client-9.1
==> default: postgresql-client-common postgresql-common ssl-cert
==> default: Suggested packages:
==> default: doc-base krb5-doc krb5-user postgresql-doc-9.1 oidentd
ident-server
==> default: locales-all openssl-blacklist
==> default: The following NEW packages will be installed:
==> default: comerr-dev krb5-multidev libgssrpc4 libkadm5clnt-mit8
libkadm5srv-mit8
==> default: libkdb5-6 libkrb5-dev libpq-dev libpq5 postgresql
postgresql-9.1
==> default: postgresql-client-9.1 postgresql-client-common
postgresql-common
==> default: postgresql-server-dev-9.1 ssl-cert
==> default: The following packages will be upgraded:
==> default: libcomerr2 libgssapi-krb5-2 libk5crypto3 libkrb5-3
libkrb5support0
==> default: 5 upgraded, 16 newly installed, 0 to remove and 105 not
upgraded.
==> default: Need to get 6,768 kB of archives.
==> default: After this operation, 27.6 MB of additional disk space will be
used.
==> default: Get:1 http://http.us.debian.org/debian/ wheezy/main libcomerr2
amd64 1.42.5-1.1+deb7u1 [56.1 kB]
==> default: Get:2 http://http.us.debian.org/debian/ wheezy/main
libk5crypto3 amd64 1.10.1+dfsg-5+deb7u7 [113 kB]
==> default: Get:3 http://http.us.debian.org/debian/ wheezy/main
libgssapi-krb5-2 amd64 1.10.1+dfsg-5+deb7u7 [150 kB]
==> default: Get:4 http://http.us.debian.org/debian/ wheezy/main libkrb5-3
amd64 1.10.1+dfsg-5+deb7u7 [394 kB]
==> default: Get:5 http://security.debian.org/ wheezy/updates/main libpq5
amd64 9.1.20-0+deb7u1+b1 [140 kB]
==> default: Get:6 http://security.debian.org/ wheezy/updates/main
libpq-dev amd64 9.1.20-0+deb7u1+b1 [196 kB]
==> default: Get:7 http://security.debian.org/ wheezy/updates/main
postgresql-client-9.1 amd64 9.1.20-0+deb7u1+b1 [1,002 kB]
==> default: Get:8 http://http.us.debian.org/debian/ wheezy/main
libkrb5support0 amd64 1.10.1+dfsg-5+deb7u7 [50.5 kB]
==> default: Get:9 http://http.us.debian.org/debian/ wheezy/main libgssrpc4
amd64 1.10.1+dfsg-5+deb7u7 [88.2 kB]
==> default: Get:10 http://http.us.debian.org/debian/ wheezy/main
libkadm5clnt-mit8 amd64 1.10.1+dfsg-5+deb7u7 [68.7 kB]
==> default: Get:11 http://http.us.debian.org/debian/ wheezy/main libkdb5-6
amd64 1.10.1+dfsg-5+deb7u7 [67.8 kB]
==> default: Get:12 http://http.us.debian.org/debian/ wheezy/main
libkadm5srv-mit8 amd64 1.10.1+dfsg-5+deb7u7 [85.5 kB]
==> default: Get:13 http://http.us.debian.org/debian/ wheezy/main
comerr-dev amd64 2.1-1.42.5-1.1+deb7u1 [42.8 kB]
==> default: Get:14 http://http.us.debian.org/debian/ wheezy/main
krb5-multidev amd64 1.10.1+dfsg-5+deb7u7 [154 kB]
==> default: Get:15 http://http.us.debian.org/debian/ wheezy/main
libkrb5-dev amd64 1.10.1+dfsg-5+deb7u7 [40.4 kB]
==> default: Get:16 http://http.us.debian.org/debian/ wheezy/main
postgresql-client-common all 134wheezy4 [63.3 kB]
==> default: Get:17 http://http.us.debian.org/debian/ wheezy/main ssl-cert
all 1.0.32+deb7u1 [19.6 kB]
==> default: Get:18 http://http.us.debian.org/debian/ wheezy/main
postgresql-common all 134wheezy4 [138 kB]
==> default: Get:19 http://http.us.debian.org/debian/ wheezy/main
postgresql all 9.1+134wheezy4 [42.5 kB]
==> default: Get:20 http://security.debian.org/ wheezy/updates/main
postgresql-9.1 amd64 9.1.20-0+deb7u1+b1 [3,301 kB]
==> default: Get:21 http://security.debian.org/ wheezy/updates/main
postgresql-server-dev-9.1 amd64 9.1.20-0+deb7u1+b1 [556 kB]
==> default: Reading changelogs...
==> default: Preconfiguring packages ...
==> default: Fetched 6,768 kB in 2min 24s (46.8 kB/s)
==> default: (Reading database ...
==> default: 62027 files and directories currently installed.)
==> default: Preparing to replace libcomerr2:amd64 1.42.5-1.1 (using
.../libcomerr2_1.42.5-1.1+deb7u1_amd64.deb) ...
==> default: Unpacking replacement libcomerr2:amd64 ...
==> default: Setting up libcomerr2:amd64 (1.42.5-1.1+deb7u1) ...
==> default: (Reading database ...
==> default: 62027 files and directories currently installed.)
==> default: Preparing to replace libk5crypto3:amd64 1.10.1+dfsg-5+deb7u1
(using .../libk5crypto3_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Unpacking replacement libk5crypto3:amd64 ...
==> default: Preparing to replace libgssapi-krb5-2:amd64
1.10.1+dfsg-5+deb7u1 (using
.../libgssapi-krb5-2_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Unpacking replacement libgssapi-krb5-2:amd64 ...
==> default: Preparing to replace libkrb5-3:amd64 1.10.1+dfsg-5+deb7u1
(using .../libkrb5-3_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Unpacking replacement libkrb5-3:amd64 ...
==> default: Preparing to replace libkrb5support0:amd64
1.10.1+dfsg-5+deb7u1 (using
.../libkrb5support0_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Unpacking replacement libkrb5support0:amd64 ...
==> default: Selecting previously unselected package libgssrpc4:amd64.
==> default: Unpacking libgssrpc4:amd64 (from
.../libgssrpc4_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package
libkadm5clnt-mit8:amd64.
==> default: Unpacking libkadm5clnt-mit8:amd64 (from
.../libkadm5clnt-mit8_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package libkdb5-6:amd64.
==> default: Unpacking libkdb5-6:amd64 (from
.../libkdb5-6_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package libkadm5srv-mit8:amd64.
==> default: Unpacking libkadm5srv-mit8:amd64 (from
.../libkadm5srv-mit8_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package comerr-dev.
==> default: Unpacking comerr-dev (from
.../comerr-dev_2.1-1.42.5-1.1+deb7u1_amd64.deb) ...
==> default: Selecting previously unselected package krb5-multidev.
==> default: Unpacking krb5-multidev (from
.../krb5-multidev_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package libpq5.
==> default: Unpacking libpq5 (from
.../libpq5_9.1.20-0+deb7u1+b1_amd64.deb) ...
==> default: Selecting previously unselected package libkrb5-dev.
==> default: Unpacking libkrb5-dev (from
.../libkrb5-dev_1.10.1+dfsg-5+deb7u7_amd64.deb) ...
==> default: Selecting previously unselected package libpq-dev.
==> default: Unpacking libpq-dev (from
.../libpq-dev_9.1.20-0+deb7u1+b1_amd64.deb) ...
==> default: Selecting previously unselected package
postgresql-client-common.
==> default: Unpacking postgresql-client-common (from
.../postgresql-client-common_134wheezy4_all.deb) ...
==> default: Selecting previously unselected package postgresql-client-9.1.
==> default: Unpacking postgresql-client-9.1 (from
.../postgresql-client-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ...
==> default: Selecting previously unselected package ssl-cert.
==> default: Unpacking ssl-cert (from .../ssl-cert_1.0.32+deb7u1_all.deb)
...
==> default: Selecting previously unselected package postgresql-common.
==> default: Unpacking postgresql-common (from
.../postgresql-common_134wheezy4_all.deb) ...
==> default: Adding 'diversion of /usr/bin/pg_config to
/usr/bin/pg_config.libpq-dev by postgresql-common'
==> default: Selecting previously unselected package postgresql-9.1.
==> default: Unpacking postgresql-9.1 (from
.../postgresql-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ...
==> default: Selecting previously unselected package postgresql.
==> default: Unpacking postgresql (from
.../postgresql_9.1+134wheezy4_all.deb) ...
==> default: Selecting previously unselected package
postgresql-server-dev-9.1.
==> default: Unpacking postgresql-server-dev-9.1 (from
.../postgresql-server-dev-9.1_9.1.20-0+deb7u1+b1_amd64.deb) ...
==> default: Processing triggers for install-info ...
==> default: Processing triggers for man-db ...
==> default: Setting up libkrb5support0:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libk5crypto3:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libkrb5-3:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libgssapi-krb5-2:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libgssrpc4:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libkadm5clnt-mit8:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libkdb5-6:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libkadm5srv-mit8:amd64 (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up comerr-dev (2.1-1.42.5-1.1+deb7u1) ...
==> default: Setting up krb5-multidev (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libpq5 (9.1.20-0+deb7u1+b1) ...
==> default: Setting up libkrb5-dev (1.10.1+dfsg-5+deb7u7) ...
==> default: Setting up libpq-dev (9.1.20-0+deb7u1+b1) ...
==> default: Setting up postgresql-client-common (134wheezy4) ...
==> default: Setting up postgresql-client-9.1 (9.1.20-0+deb7u1+b1) ...
==> default: update-alternatives:
==> default: using /usr/share/postgresql/9.1/man/man1/psql.1.gz to provide
/usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode
==> default: Setting up ssl-cert (1.0.32+deb7u1) ...
==> default: Setting up postgresql-common (134wheezy4) ...
==> default: Adding user postgres to group ssl-cert
==> default: Building PostgreSQL dictionaries from installed
myspell/hunspell packages...
==> default: Setting up postgresql-9.1 (9.1.20-0+deb7u1+b1) ...
==> default: Creating new cluster (configuration: /etc/postgresql/9.1/main,
data: /var/lib/postgresql/9.1/main)...
==> default: Moving configuration file
/var/lib/postgresql/9.1/main/postgresql.conf to /etc/postgresql/9.1/main...
==> default: Moving configuration file
/var/lib/postgresql/9.1/main/pg_hba.conf to /etc/postgresql/9.1/main...
==> default: Moving configuration file
/var/lib/postgresql/9.1/main/pg_ident.conf to /etc/postgresql/9.1/main...
==> default: Configuring postgresql.conf to use port 5432...
==> default: update-alternatives:
==> default: using /usr/share/postgresql/9.1/man/man1/postmaster.1.gz to
provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode
==> default: Starting PostgreSQL 9.1 database server:
==> default: main
==> default: .
==> default: Setting up postgresql (9.1+134wheezy4) ...
==> default: Setting up postgresql-server-dev-9.1 (9.1.20-0+deb7u1+b1) ...
==> default: .. creating the database user
==> default: .. starting GNU Health installer
*==> default: bash: ./gnuhealth_install.sh: No such file or directory*
*==> default: .. enabling the BASH environment for the vagrant user*
*==> default: ls: *
*==> default: cannot access /home/vagrant/gnuhealth/tryton/server/trytond-**
*==> default: : No such file or directory*
*==> default: cat: *
*==> default: /home/vagrant/gnuhealth/version*
*==> default: : No such file or directory*
*==> default: Done.*
2016-04-11 11:03 GMT-05:00 Carlos Eduardo Sotelo Pinto <
carlos.sotelo.pi...@gmail.com>:
> Hello Bruno
>
> thanks a lot, I will delete the box and generate it again in order on
> having a clear install box
>
> best regards
>
> 2016-04-11 10:47 GMT-05:00 Luis Falcon <fal...@gnu.org>:
>
>> Hi Bruno
>> On Mon, 11 Apr 2016 12:41:15 -0300
>> "Bruno M. Villasanti" <bvillasa...@thymbra.com> wrote:
>>
>> > Hi Carlos and Luis,
>> >
>> > 2016-04-09 7:44 GMT-03:00 Luis Falcon <fal...@gnu.org>:
>> >
>> > > Hi Carlos !
>> > >
>> > > On Fri, 8 Apr 2016 12:06:39 -0500
>> > > Carlos Eduardo Sotelo Pinto <carlos.sotelo.pi...@gmail.com> wrote:
>> > >
>> > > > Dear Coders
>> > > >
>> > > > I have found this error on the vagran on the default branch
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > *==> default: E==> default: : ==> default: Unable to locate
>> > > > package postgresql-server-dev-9.1==> default: E==> default: : ==>
>> > > > default: Couldn't find any package by regex
>> > > > 'postgresql-server-dev-9.1'* After checking the provision file I
>> > > > have found
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > *$ cat misc/vagrant/scripts/vagrant_bootstrap.sh | grep
>> > > > postgresapt-get install -y postgresql postgresql-server-dev-9.1su
>> > > > - postgres -c "createuser --createdb --no-createrole
>> > > > --no-superuser vagrant"* and this is no completely agree withe
>> > > > the box version
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > *$ apt-cache search postgresql | grep server | grep
>> > > > devpostgresql-server-dev-9.4 - development files for PostgreSQL
>> > > > 9.4 server-side programmingpostgresql-server-dev-all - extension
>> > > > build tool for multiple PostgreSQL versions*
>> > > >
>> > > > I suggest an update on the privision script
>> > > >
>> > > Tom Dunlap and Bruno Villasanti have been the ones involved in
>> > > Vagrant.
>> > >
>> > > Bruno, can you take a look a this and push it to Hg , please ?
>> > >
>> >
>> > PostgreSQL version is related to the debian box given in the
>> > Vagrantfile.
>> >
>> > config.vm.box_url = '
>> >
>> http://puppet-vagrant-boxes.puppetlabs.com/debian-73-x64-virtualbox-puppet.box
>> '
>> >
>> >
>> > I think Debian 7.x (wheezy) still using PostgreSQL 9.1.
>> >
>> > And using the script on another box, presumably it will give
>> > dependencies errors.
>> >
>> >
>> > But as you suggests, and considering that Vagrant is used to test the
>> > development environment of GNU Health, would be very good idea to
>> > update both the Box as PostgreSQL to their stable versions.
>> >
>> > So, I will perform the tests on a clean environment before confirm
>> > the changes.
>> >
>>
>> Thanks a lot, and let us know how the tests go.
>>
>> Bests
>>
>> >
>> > Regards.
>> >
>>
>>
>>
>
>
> --
> Carlos Eduardo Sotelo Pinto
> Senior Software Analyst Developer
> Claro RPC +51983265994 | MOV RPM( # ) +51 966110066
> GTalk: carlos.sotelo.pi...@gmail.com | Skype: csotelop
> GNULinux RU #379182 | GNULinux RM #277661
>
> No availability between 08:30 and 18:00, I will answer as soon as posible
>
> Please consider the environment before printing this email
> Join the campaign at http://thinkBeforePrinting.org
>
--
Carlos Eduardo Sotelo Pinto
Senior Software Analyst Developer
Claro RPC +51983265994 | MOV RPM( # ) +51 966110066
GTalk: carlos.sotelo.pi...@gmail.com | Skype: csotelop
GNULinux RU #379182 | GNULinux RM #277661
No availability between 08:30 and 18:00, I will answer as soon as posible
Please consider the environment before printing this email
Join the campaign at http://thinkBeforePrinting.org
