Hi  Again Chip,

    I need to know if you have any alarm set, or the sleep mode wakeup?
    Also, what is the voice that announces? You seem to say male and wondering 
what all the settings are in the menu. 
    I guess I will have to make up a report, or, how about sending me a copy of 
the .ini file by just copying the insides and sending it to me. So I know what 
settings you have and I can trace it from there.

    For, the announcement should not sound unless the time is within one minute 
of the hour setting you have.

    Now, maybe the timer itself is going off because in sleep mode the timer is 
getting set to less than a minute for some reason and is firing, but even if it 
was it should never sound unless it is within one minutes of a quarter hour. 

    So, I think I just may have solved the problem. Since you are only on the 
hour mode, I will have to also insure the flag reflects that. Because I just 
remembered, it could go off at each quarter hour even though you want it once 
an hour.

    My mistake, I will just make an upgrade which will also include the folder 
issue since I have to resolve that error in the trek game as well.

    I will bet Chip that you have opened the lid on a quarter hour and that is 
why it is reduced but your timing was perfect for a quarter hour trigger. No 
need for the .ini file now, just will make the changes and send it out.


    Thanks, Bruce


  Sent: Friday, April 26, 2013 8:36 PM
  Subject: Re: cuckoo clock laptop problem still happening


  Hi Chip,
      That setting is the only place where it gets fired. The timer function 
call is for that area and the only thing I can say is the time as the lid opens 
is not the same.

      But, when it makes the announcement of the time, does it say the correct 
time or just the hour time? What I mean is the time it says is the present time 
when it fires, and does it say that or the top of hour time?

      Now, maybe it is firing after the reset, it should not, but maybe it is, 
an issue maybe with the timer itself. In other words, when it gets set for the 
next hour the milliseconds is off and sounding immediately upon being set. I 
just can't imagine that, but the only possibility.

  Let me know if it says the exact time in which the lid is opened. I will 
check and make sure I only have one function call for the top of the hour; 
unless an alarm or wakeup is going off, there not set to go off when the hour 
one does. Now will investigate that and put the same flag there if that were 
happening. The alarm should not go off if it is not set, do you have an alarm 
setting set as well? Or a wake up setting?

          Bruce

    Sent: Friday, April 26, 2013 7:35 PM
    Subject: RE: cuckoo clock laptop problem still happening


    Bruce,

     

    Yep; I checked the announce menu item you mentioned and it is not checked.

     

    The announcement doesn't always happen as it used to, so things are much 
better; it's just a little strange, especially since it's male.

     

    Chip

     

     

    From: BX [mailto:bronx_...@fltg.net] 
    Sent: Friday, April 26, 2013 12:31 PM
    To: gw-scripting@gwmicro.com
    Subject: Re: cuckoo clock laptop problem still happening

     

    Hi Chip,

     

        The .ini is not included so no one looses there settings. I believe 
that error is connected to the folder created for the record files and it also 
happens with the Trek game.

        I may have to delete that folder upon install but not sure if that will 
fix it since the error or warning comes up before install.

     

        Now, try deleting the record to wav folder and download the latest 
version again. But, before doing that change the version level in the one you 
have to an earlier number so it will know to update.

     

        I may even have to include a check for update on the help menu so it 
will delete the folder if an update is there. 

        But having said all that I may just compile the record program so it 
does not require a folder, which I have not been able to do since the fire at 
my house.

     

    Laptop lid problem:

        Also, Chip did you look at the flag on the Clocks menu, the first menu 
when using the alt key and cursoring down to the 5'th option, Announce after 
hibernate/screen savor mode?

     

        What is it's setting? Is it checked? For it should not be. When you 
toggle it AI have it say on or off depending on the check state.

     

     

        

            Bruce

     

      Sent: Friday, April 26, 2013 7:23 AM

      Subject: cuckoo clock laptop problem still happening

       

      Sorry to say Bruce, but I have your latest version of the cuckoo clock, 
and it's set for a female voice at the top of the hour and nothing else, and 
yet when I open my laptop lid I immediately hear the male voice announcing the 
last hourly time.

       

      Also, when I installed this version, it told me that some of its files 
will conflict with some files from the current version of the cuckoo clock (I 
believe this usually happens when you include a file which has a time stamp 
earlier than that of one of the files in the previous package; this can easily 
happen if you include the .ini file).

       

      Hth,

       

      Chip

       

Reply via email to