Hi,
Because gettextizze and fix old strings is a bit confusing (for review
and tracking the changes, etc.) I've prepared a patch that should fix
some strings from the help in commands/* . Find attached. I will prepare
a Changelog for this patch tomorrow.
Once commands/* has the correct strings (or better ones) I will proceed
to gettextizze.
On Dec/08/2009, Vladimir '??-coder/phcoder' Serbinenko wrote:
> I've spotted some messages which may be unclear.
Thanks for the review. Can you check the patch again? Capitalizations
and full stops should be fine. Added something in some messages.
--
Carles Pina i Estany
http://pinux.info
=== modified file 'commands/acpi.c'
--- commands/acpi.c 2009-11-23 15:31:54 +0000
+++ commands/acpi.c 2009-12-20 23:51:49 +0000
@@ -36,23 +36,23 @@
static const struct grub_arg_option options[] = {
{"exclude", 'x', 0,
- "Don't load host tables specified by comma-separated list",
+ "Don't load host tables specified by comma-separated list.",
0, ARG_TYPE_STRING},
{"load-only", 'n', 0,
- "Load only tables specified by comma-separated list", 0, ARG_TYPE_STRING},
- {"v1", '1', 0, "Expose v1 tables", 0, ARG_TYPE_NONE},
- {"v2", '2', 0, "Expose v2 and v3 tables", 0, ARG_TYPE_NONE},
- {"oemid", 'o', 0, "Set OEMID of RSDP, XSDT and RSDT", 0, ARG_TYPE_STRING},
+ "Load only tables specified by comma-separated list.", 0, ARG_TYPE_STRING},
+ {"v1", '1', 0, "Expose v1 tables.", 0, ARG_TYPE_NONE},
+ {"v2", '2', 0, "Expose v2 and v3 tables.", 0, ARG_TYPE_NONE},
+ {"oemid", 'o', 0, "Set OEMID of RSDP, XSDT and RSDT.", 0, ARG_TYPE_STRING},
{"oemtable", 't', 0,
- "Set OEMTABLE ID of RSDP, XSDT and RSDT", 0, ARG_TYPE_STRING},
+ "Set OEMTABLE ID of RSDP, XSDT and RSDT.", 0, ARG_TYPE_STRING},
{"oemtablerev", 'r', 0,
- "Set OEMTABLE revision of RSDP, XSDT and RSDT", 0, ARG_TYPE_INT},
+ "Set OEMTABLE revision of RSDP, XSDT and RSDT.", 0, ARG_TYPE_INT},
{"oemtablecreator", 'c', 0,
- "Set creator field of RSDP, XSDT and RSDT", 0, ARG_TYPE_STRING},
+ "Set creator field of RSDP, XSDT and RSDT.", 0, ARG_TYPE_STRING},
{"oemtablecreatorrev", 'd', 0,
- "Set creator revision of RSDP, XSDT and RSDT", 0, ARG_TYPE_INT},
- {"no-ebda", 'e', 0, "Don't update EBDA. May fix failures or hangs on some"
- " BIOSes but makes it ineffective with OS not receiving RSDP from GRUB",
+ "Set creator revision of RSDP, XSDT and RSDT.", 0, ARG_TYPE_INT},
+ {"no-ebda", 'e', 0, "Don't update EBDA. May fix failures or hangs on some."
+ " BIOSes but makes it ineffective with OS not receiving RSDP from GRUB.",
0, ARG_TYPE_NONE},
{0, 0, 0, 0, 0, 0}
};
@@ -763,7 +763,7 @@ GRUB_MOD_INIT(acpi)
"--load-only=table1,table2] filename1 "
" [filename2] [...]",
"Load host acpi tables and tables "
- "specified by arguments",
+ "specified by arguments.",
options);
}
=== modified file 'commands/blocklist.c'
--- commands/blocklist.c 2009-06-10 21:04:23 +0000
+++ commands/blocklist.c 2009-12-21 00:09:02 +0000
@@ -87,7 +87,7 @@ grub_cmd_blocklist (grub_command_t cmd _
if (! file->device->disk)
return grub_error (GRUB_ERR_BAD_DEVICE,
- "this command is available only for disk devices.");
+ "this command is available only for disk devices");
if (file->device->disk->partition)
part_start = grub_partition_get_start (file->device->disk->partition);
=== modified file 'commands/boot.c'
--- commands/boot.c 2009-06-10 21:04:23 +0000
+++ commands/boot.c 2009-12-21 00:09:09 +0000
@@ -186,7 +186,7 @@ GRUB_MOD_INIT(boot)
{
cmd_boot =
grub_register_command ("boot", grub_cmd_boot,
- 0, "boot an operating system");
+ 0, "Boot an operating system.");
}
GRUB_MOD_FINI(boot)
=== modified file 'commands/cmp.c'
--- commands/cmp.c 2009-06-10 21:04:23 +0000
+++ commands/cmp.c 2009-12-21 00:09:19 +0000
@@ -40,7 +40,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
if (argc != 2)
return grub_error (GRUB_ERR_BAD_ARGUMENT, "two arguments required");
- grub_printf ("Compare `%s' and `%s':\n", args[0],
+ grub_printf ("Compare file `%s' with `%s':\n", args[0],
args[1]);
file1 = grub_gzfile_open (args[0], 1);
@@ -49,7 +49,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
goto cleanup;
if (grub_file_size (file1) != grub_file_size (file2))
- grub_printf ("Differ in size: %llu [%s], %llu [%s]\n",
+ grub_printf ("Files differ in size: %llu [%s], %llu [%s]\n",
(unsigned long long) grub_file_size (file1), args[0],
(unsigned long long) grub_file_size (file2), args[1]);
else
@@ -76,7 +76,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
{
if (buf1[i] != buf2[i])
{
- grub_printf ("Differ at the offset %llu: 0x%x [%s], 0x%x [%s]\n",
+ grub_printf ("Files differ at the offset %llu: 0x%x [%s], 0x%x [%s]\n",
(unsigned long long) (i + pos), buf1[i], args[0],
buf2[i], args[1]);
goto cleanup;
=== modified file 'commands/echo.c'
--- commands/echo.c 2009-06-16 16:06:49 +0000
+++ commands/echo.c 2009-12-21 00:09:53 +0000
@@ -23,8 +23,8 @@
static const struct grub_arg_option options[] =
{
- {0, 'n', 0, "do not output the trailing newline", 0, 0},
- {0, 'e', 0, "enable interpretation of backslash escapes", 0, 0},
+ {0, 'n', 0, "Do not output the trailing newline.", 0, 0},
+ {0, 'e', 0, "Enable interpretation of backslash escapes.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/efi/loadbios.c'
--- commands/efi/loadbios.c 2009-11-30 18:09:11 +0000
+++ commands/efi/loadbios.c 2009-12-20 23:58:17 +0000
@@ -46,7 +46,7 @@ enable_rom_area (void)
rom_ptr = (grub_uint32_t *) VBIOS_ADDR;
if (*rom_ptr != BLANK_MEM)
{
- grub_printf ("ROM image present.\n");
+ grub_printf ("ROM image is present.\n");
return 0;
}
@@ -63,7 +63,7 @@ enable_rom_area (void)
*rom_ptr = 0;
if (*rom_ptr != 0)
{
- grub_printf ("Can\'t enable rom area.\n");
+ grub_printf ("Can\'t enable ROM area.\n");
return 0;
}
@@ -201,7 +201,7 @@ static grub_command_t cmd_fakebios, cmd_
GRUB_MOD_INIT(loadbios)
{
cmd_fakebios = grub_register_command ("fakebios", grub_cmd_fakebios,
- 0, "fake bios.");
+ 0, "Fake bios.");
cmd_loadbios = grub_register_command ("loadbios", grub_cmd_loadbios,
"loadbios BIOS_DUMP [INT10_DUMP]",
=== modified file 'commands/gptsync.c'
--- commands/gptsync.c 2009-08-23 12:00:57 +0000
+++ commands/gptsync.c 2009-12-21 00:10:28 +0000
@@ -246,7 +246,7 @@ GRUB_MOD_INIT(gptsync)
"of hybrid mbr. Up to 3 partitions are "
"allowed. TYPE is an MBR type. "
"+ means that partition is active. "
- "Only one partition can be active");
+ "Only one partition can be active.".);
}
GRUB_MOD_FINI(gptsync)
=== modified file 'commands/halt.c'
--- commands/halt.c 2009-12-03 23:07:29 +0000
+++ commands/halt.c 2009-12-21 00:10:33 +0000
@@ -35,7 +35,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(halt)
{
cmd = grub_register_command ("halt", grub_cmd_halt,
- 0, "halts the computer. This command does not"
+ 0, "Halts the computer. This command does not"
" work on all firmware.");
}
=== modified file 'commands/handler.c'
--- commands/handler.c 2009-05-04 03:49:08 +0000
+++ commands/handler.c 2009-12-21 00:10:40 +0000
@@ -96,15 +96,15 @@ GRUB_MOD_INIT(handler)
cmd_handler =
grub_register_command ("handler", grub_cmd_handler,
"handler [class [handler]]",
- "List or select a handler");
+ "List or select a handler.");
cmd_terminal_input =
grub_register_command ("terminal_input", grub_cmd_handler,
"terminal_input [handler]",
- "List or select a handler");
+ "List or select an input handler.");
cmd_terminal_output =
grub_register_command ("terminal_output", grub_cmd_handler,
"terminal_output [handler]",
- "List or select a handler");
+ "List or select an output handler.");
}
GRUB_MOD_FINI(handler)
=== modified file 'commands/hdparm.c'
--- commands/hdparm.c 2009-05-04 03:49:08 +0000
+++ commands/hdparm.c 2009-12-21 00:11:53 +0000
@@ -26,27 +26,27 @@
#include <grub/extcmd.h>
static const struct grub_arg_option options[] = {
- {"apm", 'B', 0, "set Advanced Power Management\n"
- "(1=low, ..., 254=high, 255=off)",
+ {"apm", 'B', 0, "Set Advanced Power Management\n"
+ "(1=low, ..., 254=high, 255=off).",
0, ARG_TYPE_INT},
- {"power", 'C', 0, "check power mode", 0, ARG_TYPE_NONE},
- {"security-freeze", 'F', 0, "freeze ATA security settings until reset",
+ {"power", 'C', 0, "Check power mode.", 0, ARG_TYPE_NONE},
+ {"security-freeze", 'F', 0, "Freeze ATA security settings until reset.",
0, ARG_TYPE_NONE},
- {"health", 'H', 0, "check SMART health status", 0, ARG_TYPE_NONE},
- {"aam", 'M', 0, "set Automatic Acoustic Management\n"
- "(0=off, 128=quiet, ..., 254=fast)",
+ {"health", 'H', 0, "Check SMART health status.", 0, ARG_TYPE_NONE},
+ {"aam", 'M', 0, "Set Automatic Acoustic Management\n"
+ "(0=off, 128=quiet, ..., 254=fast).",
0, ARG_TYPE_INT},
- {"standby-timeout", 'S', 0, "set standby timeout\n"
- "(0=off, 1=5s, 2=10s, ..., 240=20m, 241=30m, ...)",
+ {"standby-timeout", 'S', 0, "Set standby timeout\n"
+ "(0=off, 1=5s, 2=10s, ..., 240=20m, 241=30m, ...).",
0, ARG_TYPE_INT},
- {"standby", 'y', 0, "set drive to standby mode", 0, ARG_TYPE_NONE},
- {"sleep", 'Y', 0, "set drive to sleep mode", 0, ARG_TYPE_NONE},
- {"identify", 'i', 0, "print drive identity and settings",
+ {"standby", 'y', 0, "Set drive to standby mode.", 0, ARG_TYPE_NONE},
+ {"sleep", 'Y', 0, "Set drive to sleep mode.", 0, ARG_TYPE_NONE},
+ {"identify", 'i', 0, "Print drive identity and settings.",
0, ARG_TYPE_NONE},
- {"dumpid", 'I', 0, "dump contents of ATA IDENTIFY sector",
+ {"dumpid", 'I', 0, "Dump contents of ATA IDENTIFY sector.",
0, ARG_TYPE_NONE},
- {"smart", -1, 0, "disable/enable SMART (0/1)", 0, ARG_TYPE_INT},
- {"quiet", 'q', 0, "do not print messages", 0, ARG_TYPE_NONE},
+ {"smart", -1, 0, "Disable/enable SMART (0/1).", 0, ARG_TYPE_INT},
+ {"quiet", 'q', 0, "Do not print messages.", 0, ARG_TYPE_NONE},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/hexdump.c'
--- commands/hexdump.c 2009-12-10 13:37:42 +0000
+++ commands/hexdump.c 2009-12-21 00:12:18 +0000
@@ -26,9 +26,9 @@
#include <grub/extcmd.h>
static const struct grub_arg_option options[] = {
- {"skip", 's', 0, "skip offset bytes from the beginning of file.", 0,
+ {"skip", 's', 0, "Skip offset bytes from the beginning of file.", 0,
ARG_TYPE_INT},
- {"length", 'n', 0, "read only length bytes", 0, ARG_TYPE_INT},
+ {"length", 'n', 0, "Read only length bytes", 0, ARG_TYPE_INT},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/i386/cpuid.c'
--- commands/i386/cpuid.c 2009-10-09 17:57:02 +0000
+++ commands/i386/cpuid.c 2009-12-21 00:17:58 +0000
@@ -33,7 +33,7 @@
static const struct grub_arg_option options[] =
{
- {"long-mode", 'l', 0, "check for long mode flag (default)", 0, 0},
+ {"long-mode", 'l', 0, "Check for long mode flag (default).", 0, 0},
{0, 0, 0, 0, 0, 0}
};
@@ -88,7 +88,7 @@ done:
#endif
cmd = grub_register_extcmd ("cpuid", grub_cmd_cpuid, GRUB_COMMAND_FLAG_BOTH,
- "cpuid [-l]", "Check for CPU features", options);
+ "cpuid [-l]", "Check for CPU features.", options);
}
GRUB_MOD_FINI(cpuid)
=== modified file 'commands/i386/pc/drivemap.c'
--- commands/i386/pc/drivemap.c 2009-06-11 16:13:39 +0000
+++ commands/i386/pc/drivemap.c 2009-12-21 00:18:36 +0000
@@ -33,9 +33,9 @@ static grub_uint32_t *const int13slot =
/* Remember to update enum opt_idxs accordingly. */
static const struct grub_arg_option options[] = {
- {"list", 'l', 0, "show the current mappings", 0, 0},
- {"reset", 'r', 0, "reset all mappings to the default values", 0, 0},
- {"swap", 's', 0, "perform both direct and reverse mappings", 0, 0},
+ {"list", 'l', 0, "Show the current mappings.", 0, 0},
+ {"reset", 'r', 0, "Reset all mappings to the default values.", 0, 0},
+ {"swap", 's', 0, "Perform both direct and reverse mappings.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
@@ -404,7 +404,7 @@ GRUB_MOD_INIT (drivemap)
GRUB_COMMAND_FLAG_BOTH,
"drivemap"
" -l | -r | [-s] grubdev osdisk",
- "Manage the BIOS drive mappings",
+ "Manage the BIOS drive mappings.",
options);
drivemap_hook =
grub_loader_register_preboot_hook (&install_int13_handler,
=== modified file 'commands/i386/pc/halt.c'
--- commands/i386/pc/halt.c 2009-12-03 23:07:29 +0000
+++ commands/i386/pc/halt.c 2009-12-21 00:18:52 +0000
@@ -23,7 +23,7 @@
static const struct grub_arg_option options[] =
{
- {"no-apm", 'n', 0, "do not use APM to halt the computer", 0, 0},
+ {"no-apm", 'n', 0, "Do not use APM to halt the computer.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
@@ -47,7 +47,7 @@ GRUB_MOD_INIT(halt)
{
cmd = grub_register_extcmd ("halt", grub_cmd_halt, GRUB_COMMAND_FLAG_BOTH,
"halt [-n]",
- "Halt the system, if possible using APM",
+ "Halt the system, if possible using APM.",
options);
}
=== modified file 'commands/i386/pc/play.c'
--- commands/i386/pc/play.c 2009-06-10 23:47:49 +0000
+++ commands/i386/pc/play.c 2009-12-21 00:19:00 +0000
@@ -207,7 +207,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(play)
{
cmd = grub_register_command ("play", grub_cmd_play,
- "play FILE", "Play a tune");
+ "play FILE", "Play a tune.");
}
GRUB_MOD_FINI(play)
=== modified file 'commands/i386/pc/pxecmd.c'
--- commands/i386/pc/pxecmd.c 2009-05-04 03:49:08 +0000
+++ commands/i386/pc/pxecmd.c 2009-12-21 00:19:07 +0000
@@ -25,9 +25,9 @@
static const struct grub_arg_option options[] =
{
- {"info", 'i', 0, "show PXE information.", 0, 0},
- {"bsize", 'b', 0, "set PXE block size", 0, ARG_TYPE_INT},
- {"unload", 'u', 0, "unload PXE stack.", 0, 0},
+ {"info", 'i', 0, "Show PXE information.", 0, 0},
+ {"bsize", 'b', 0, "Set PXE block size.", 0, ARG_TYPE_INT},
+ {"unload", 'u', 0, "Unload PXE stack.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/i386/pc/vbetest.c'
--- commands/i386/pc/vbetest.c 2009-08-14 12:41:58 +0000
+++ commands/i386/pc/vbetest.c 2009-12-21 00:19:25 +0000
@@ -168,7 +168,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(vbetest)
{
cmd = grub_register_command ("vbetest", grub_cmd_vbetest,
- 0, "Test VESA BIOS Extension 2.0+ support");
+ 0, "Test VESA BIOS Extension 2.0+ support.");
}
GRUB_MOD_FINI(vbetest)
=== modified file 'commands/ieee1275/suspend.c'
--- commands/ieee1275/suspend.c 2009-05-04 03:49:08 +0000
+++ commands/ieee1275/suspend.c 2009-12-21 00:17:51 +0000
@@ -39,7 +39,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(ieee1275_suspend)
{
cmd = grub_register_command ("suspend", grub_cmd_suspend,
- 0, "Return to Open Firmware prompt");
+ 0, "Return to Open Firmware prompt.");
}
GRUB_MOD_FINI(ieee1275_suspend)
=== modified file 'commands/keystatus.c'
--- commands/keystatus.c 2009-09-02 09:14:20 +0000
+++ commands/keystatus.c 2009-12-21 00:12:33 +0000
@@ -24,9 +24,9 @@
static const struct grub_arg_option options[] =
{
- {"shift", 's', 0, "check Shift key", 0, 0},
- {"ctrl", 'c', 0, "check Control key", 0, 0},
- {"alt", 'a', 0, "check Alt key", 0, 0},
+ {"shift", 's', 0, "Check Shift key.", 0, 0},
+ {"ctrl", 'c', 0, "Check Control key.", 0, 0},
+ {"alt", 'a', 0, "Check Alt key.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
@@ -71,7 +71,7 @@ GRUB_MOD_INIT(keystatus)
cmd = grub_register_extcmd ("keystatus", grub_cmd_keystatus,
GRUB_COMMAND_FLAG_BOTH,
"keystatus [--shift] [--ctrl] [--alt]",
- "Check key modifier status",
+ "Check key modifier status.",
options);
}
=== modified file 'commands/loadenv.c'
--- commands/loadenv.c 2009-09-01 19:07:42 +0000
+++ commands/loadenv.c 2009-12-21 00:12:52 +0000
@@ -29,7 +29,7 @@
static const struct grub_arg_option options[] =
{
- {"file", 'f', 0, "specify filename", 0, ARG_TYPE_PATHNAME},
+ {"file", 'f', 0, "Specify filename.", 0, ARG_TYPE_PATHNAME},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/ls.c'
--- commands/ls.c 2009-06-10 21:04:23 +0000
+++ commands/ls.c 2009-12-21 00:13:15 +0000
@@ -33,9 +33,9 @@
static const struct grub_arg_option options[] =
{
- {"long", 'l', 0, "show a long list with more detailed information", 0, 0},
- {"human-readable", 'h', 0, "print sizes in a human readable format", 0, 0},
- {"all", 'a', 0, "list all files", 0, 0},
+ {"long", 'l', 0, "Show a long list with more detailed information.", 0, 0},
+ {"human-readable", 'h', 0, "Print sizes in a human readable format.", 0, 0},
+ {"all", 'a', 0, "List all files.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/lspci.c'
--- commands/lspci.c 2009-10-14 08:36:37 +0000
+++ commands/lspci.c 2009-12-20 23:43:54 +0000
@@ -160,7 +160,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(lspci)
{
cmd = grub_register_command ("lspci", grub_cmd_lspci,
- 0, "List PCI devices");
+ 0, "List PCI devices.");
}
GRUB_MOD_FINI(lspci)
=== modified file 'commands/memrw.c'
--- commands/memrw.c 2009-05-04 03:49:08 +0000
+++ commands/memrw.c 2009-12-21 00:15:08 +0000
@@ -71,22 +71,22 @@ GRUB_MOD_INIT(memrw)
{
cmd_read_byte =
grub_register_command ("read_byte", grub_cmd_read,
- "read_byte ADDR", "read byte.");
+ "read_byte ADDR", "Read byte from ADDR.");
cmd_read_word =
grub_register_command ("read_word", grub_cmd_read,
- "read_word ADDR", "read word.");
+ "read_word ADDR", "Read word from ADDR.");
cmd_read_dword =
grub_register_command ("read_dword", grub_cmd_read,
- "read_dword ADDR", "read dword.");
+ "read_dword ADDR", "Read dword from ADDR.");
cmd_write_byte =
grub_register_command ("write_byte", grub_cmd_write,
- "write_byte ADDR VALUE", "write byte.");
+ "write_byte ADDR VALUE", "Write byte VALUE to ADDR.");
cmd_write_word =
grub_register_command ("write_word", grub_cmd_write,
- "write_word ADDR VALUE", "write word.");
+ "write_word ADDR VALUE", "Write word VALUE to ADDR.");
cmd_write_dword =
grub_register_command ("write_dword", grub_cmd_write,
- "write_dword ADDR VALUE", "write dword.");
+ "write_dword ADDR VALUE", "Write dword VALUE to ADDR.");
}
GRUB_MOD_FINI(memrw)
=== modified file 'commands/minicmd.c'
--- commands/minicmd.c 2009-11-19 10:39:14 +0000
+++ commands/minicmd.c 2009-12-21 00:15:18 +0000
@@ -354,28 +354,28 @@ GRUB_MOD_INIT(minicmd)
{
cmd_cat =
grub_register_command ("cat", grub_mini_cmd_cat,
- "cat FILE", "show the contents of a file");
+ "cat FILE", "Show the contents of a file.");
cmd_help =
grub_register_command ("help", grub_mini_cmd_help,
- 0, "show this message");
+ 0, "Show this message.");
cmd_root =
grub_register_command ("root", grub_mini_cmd_root,
- "root [DEVICE]", "set the root device");
+ "root [DEVICE]", "Set the root device.");
cmd_dump =
grub_register_command ("dump", grub_mini_cmd_dump,
- "dump ADDR", "dump memory");
+ "dump ADDR", "Dump memory.");
cmd_rmmod =
grub_register_command ("rmmod", grub_mini_cmd_rmmod,
- "rmmod MODULE", "remove a module");
+ "rmmod MODULE", "Remove a module.");
cmd_lsmod =
grub_register_command ("lsmod", grub_mini_cmd_lsmod,
- 0, "show loaded modules");
+ 0, "Show loaded modules.");
cmd_exit =
grub_register_command ("exit", grub_mini_cmd_exit,
- 0, "exit from GRUB");
+ 0, "Exit from GRUB.");
cmd_clear =
grub_register_command ("clear", grub_mini_cmd_clear,
- 0, "clear the screen");
+ 0, "Clear the screen.");
}
GRUB_MOD_FINI(minicmd)
=== modified file 'commands/parttool.c'
--- commands/parttool.c 2009-07-16 22:14:09 +0000
+++ commands/parttool.c 2009-12-21 00:15:30 +0000
@@ -34,9 +34,9 @@ static struct grub_parttool *parts = 0;
static int curhandle = 0;
static grub_dl_t mymod;
static char helpmsg[] =
- "perform COMMANDS on partition.\n"
+ "Perform COMMANDS on partition.\n"
"Use \"parttool PARTITION help\" for the list "
- "of available commands";
+ "of available commands.";
int
grub_parttool_register(const char *part_name,
=== modified file 'commands/probe.c'
--- commands/probe.c 2009-07-25 17:46:38 +0000
+++ commands/probe.c 2009-12-21 00:16:03 +0000
@@ -34,12 +34,12 @@
static const struct grub_arg_option options[] =
{
{"set", 's', GRUB_ARG_OPTION_OPTIONAL,
- "set a variable to return value", "VAR", ARG_TYPE_STRING},
- {"driver", 'd', 0, "determine driver", 0, 0},
- {"partmap", 'p', 0, "determine partition map type", 0, 0},
- {"fs", 'f', 0, "determine filesystem type", 0, 0},
- {"fs-uuid", 'u', 0, "determine filesystem UUID", 0, 0},
- {"label", 'l', 0, "determine filesystem label", 0, 0},
+ "Set a variable to return value.", "VAR", ARG_TYPE_STRING},
+ {"driver", 'd', 0, "Determine driver.", 0, 0},
+ {"partmap", 'p', 0, "Determine partition map type.", 0, 0},
+ {"fs", 'f', 0, "Determine filesystem type.", 0, 0},
+ {"fs-uuid", 'u', 0, "Determine filesystem UUID.", 0, 0},
+ {"label", 'l', 0, "Determine filesystem label.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/read.c'
--- commands/read.c 2009-12-20 13:09:16 +0000
+++ commands/read.c 2009-12-21 00:16:09 +0000
@@ -80,7 +80,7 @@ GRUB_MOD_INIT(read)
{
cmd = grub_register_command ("read", grub_cmd_read,
"read [ENVVAR]",
- "Set variable with user input");
+ "Set variable with user input.");
}
GRUB_MOD_FINI(read)
=== modified file 'commands/reboot.c'
--- commands/reboot.c 2009-12-03 23:07:29 +0000
+++ commands/reboot.c 2009-12-21 00:16:13 +0000
@@ -35,7 +35,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(reboot)
{
cmd = grub_register_command ("reboot", grub_cmd_reboot,
- 0, "Reboot the computer");
+ 0, "Reboot the computer.");
}
GRUB_MOD_FINI(reboot)
=== modified file 'commands/search.c'
--- commands/search.c 2009-08-23 15:27:07 +0000
+++ commands/search.c 2009-12-21 00:16:42 +0000
@@ -29,11 +29,11 @@
static const struct grub_arg_option options[] =
{
- {"file", 'f', 0, "search devices by a file", 0, 0},
- {"label", 'l', 0, "search devices by a filesystem label", 0, 0},
- {"fs-uuid", 'u', 0, "search devices by a filesystem UUID", 0, 0},
- {"set", 's', GRUB_ARG_OPTION_OPTIONAL, "set a variable to the first device found", "VAR", ARG_TYPE_STRING},
- {"no-floppy", 'n', 0, "do not probe any floppy drive", 0, 0},
+ {"file", 'f', 0, "Search devices by a file.", 0, 0},
+ {"label", 'l', 0, "Search devices by a filesystem label.", 0, 0},
+ {"fs-uuid", 'u', 0, "Search devices by a filesystem UUID.", 0, 0},
+ {"set", 's', GRUB_ARG_OPTION_OPTIONAL, "Set a variable to the first device found.", "VAR", ARG_TYPE_STRING},
+ {"no-floppy", 'n', 0, "Do not probe any floppy drive.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
=== modified file 'commands/sleep.c'
--- commands/sleep.c 2009-03-21 08:39:59 +0000
+++ commands/sleep.c 2009-12-21 00:16:57 +0000
@@ -27,8 +27,8 @@
static const struct grub_arg_option options[] =
{
- {"verbose", 'v', 0, "verbose countdown", 0, 0},
- {"interruptible", 'i', 0, "interruptible with ESC", 0, 0},
+ {"verbose", 'v', 0, "Verbose countdown.", 0, 0},
+ {"interruptible", 'i', 0, "Interruptible with ESC.", 0, 0},
{0, 0, 0, 0, 0, 0}
};
@@ -106,7 +106,7 @@ GRUB_MOD_INIT(sleep)
{
cmd = grub_register_extcmd ("sleep", grub_cmd_sleep, GRUB_COMMAND_FLAG_BOTH,
"sleep NUMBER_OF_SECONDS",
- "Wait for a specified number of seconds",
+ "Wait for a specified number of seconds.",
options);
}
=== modified file 'commands/test.c'
--- commands/test.c 2009-09-14 19:57:45 +0000
+++ commands/test.c 2009-12-21 00:17:07 +0000
@@ -420,9 +420,9 @@ static grub_command_t cmd_1, cmd_2;
GRUB_MOD_INIT(test)
{
cmd_1 = grub_register_command ("[", grub_cmd_test,
- "[ EXPRESSION ]", "Evaluate an expression");
+ "[ EXPRESSION ]", "Evaluate an expression.");
cmd_2 = grub_register_command ("test", grub_cmd_test,
- "test EXPRESSION", "Evaluate an expression");
+ "test EXPRESSION", "Evaluate an expression.");
}
GRUB_MOD_FINI(test)
=== modified file 'commands/true.c'
--- commands/true.c 2009-06-08 07:32:14 +0000
+++ commands/true.c 2009-12-21 00:17:14 +0000
@@ -43,10 +43,10 @@ GRUB_MOD_INIT(true)
{
cmd_true =
grub_register_command ("true", grub_cmd_true,
- 0, "do nothing, successfully");
+ 0, "Do nothing, successfully.");
cmd_false =
grub_register_command ("false", grub_cmd_false,
- 0, "do nothing, unsuccessfully");
+ 0, "Do nothing, unsuccessfully.");
}
GRUB_MOD_FINI(true)
=== modified file 'commands/usbtest.c'
--- commands/usbtest.c 2009-11-09 17:43:53 +0000
+++ commands/usbtest.c 2009-12-21 00:17:21 +0000
@@ -195,7 +195,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(usbtest)
{
cmd = grub_register_command ("usb", grub_cmd_usbtest,
- 0, "Test USB support");
+ 0, "Test USB support.");
}
GRUB_MOD_FINI(usbtest)
=== modified file 'commands/videotest.c'
--- commands/videotest.c 2009-06-04 18:22:45 +0000
+++ commands/videotest.c 2009-12-21 00:17:27 +0000
@@ -178,7 +178,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(videotest)
{
cmd = grub_register_command ("videotest", grub_cmd_videotest,
- 0, "Test video subsystem");
+ 0, "Test video subsystem.");
}
GRUB_MOD_FINI(videotest)
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
