Carles Pina i Estany wrote:
> Hello,
>
> I've started to add gettext support in commands/*
>
> See the attached patch and ChangeLog.
>
> It's not completely exhaustive (hdparm is not in this patch).
>
> Comments before committing?
>
> Notice the the grub_register_command use N_(" ") and then these strings
> gets registered in commands/help.c when they are gonna to be on the
> screen.
>
> I've tried to translate grub_register_command and the obvious
> grub_printf. Maybe some more things need to be translated (other strings
> for example). It will be, but I would like to add gettext support to the
> 90% of the strings soon so the translators can start to work on it (and
> finish everything of course).
>
>
I've spotted some messages which may be unclear.
@@ -186,7 +187,7 @@ GRUB_MOD_INIT(boot)
{
cmd_boot =
grub_register_command ("boot", grub_cmd_boot,
- 0, "boot an operating system");
+ 0, N_("boot an operating system"));
}
This isn't space-constrained anymore. Capitalizing first letter and putting a
dot at the will make it nicer and inform translator that it's a whole sentence.
@@ -40,7 +41,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
if (argc != 2)
return grub_error (GRUB_ERR_BAD_ARGUMENT, "two arguments required");
- grub_printf ("Compare `%s' and `%s':\n", args[0],
+ grub_printf (_("Compare `%s' and `%s':\n"), args[0],
args[1]);
Translator won't know if %s's are files or some other entities.
"Compare file '%s' with '%s':\n" would be an improvement. BTW here you can use
printf_ too.
@@ -49,7 +50,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
goto cleanup;
if (grub_file_size (file1) != grub_file_size (file2))
- grub_printf ("Differ in size: %llu [%s], %llu [%s]\n",
+ grub_printf (_("Differ in size: %llu [%s], %llu [%s]\n"),
(unsigned long long) grub_file_size (file1), args[0],
(unsigned long long) grub_file_size (file2), args[1]);
else
Same. Message is unclear.
@@ -76,7 +77,7 @@ grub_cmd_cmp (grub_command_t cmd __attri
{
if (buf1[i] != buf2[i])
{
- grub_printf ("Differ at the offset %llu: 0x%x [%s], 0x%x
[%s]\n",
+ grub_printf (_("Differ at the offset %llu: 0x%x [%s], 0x%x
[%s]\n"),
(unsigned long long) (i + pos), buf1[i], args[0],
buf2[i], args[1]);
goto cleanup;
Same
=== modified file 'commands/efi/fixvideo.c'
--- commands/efi/fixvideo.c 2009-05-04 03:49:08 +0000
+++ commands/efi/fixvideo.c 2009-12-06 16:39:59 +0000
@@ -22,6 +22,7 @@
#include <grub/file.h>
#include <grub/pci.h>
#include <grub/command.h>
+#include <grub/i18n.h>
static struct grub_video_patch
{
@@ -53,24 +54,24 @@ scan_card (int bus, int dev, int func, g
{
grub_target_addr_t base;
- grub_printf ("Found graphic card: %s\n", p->name);
+ grub_printf (_("Found graphic card: %s\n"), p->name);
addr += 8 + p->mmio_bar * 4;
base = grub_pci_read (addr);
if ((! base) || (base & GRUB_PCI_ADDR_SPACE_IO) ||
(base & GRUB_PCI_ADDR_MEM_PREFETCH))
- grub_printf ("Invalid MMIO bar %d\n", p->mmio_bar);
+ grub_printf (_("Invalid MMIO bar %d\n"), p->mmio_bar);
else
{
base &= GRUB_PCI_ADDR_MEM_MASK;
base += p->mmio_reg;
if (*((volatile grub_uint32_t *) base) != p->mmio_old)
- grub_printf ("Old value don't match\n");
+ grub_printf (_("Old value don't match\n"));
else
{
*((volatile grub_uint32_t *) base) = 0;
if (*((volatile grub_uint32_t *) base))
- grub_printf ("Set MMIO fails\n");
+ grub_printf (_("Set MMIO fails\n"));
}
}
@@ -79,7 +80,7 @@ scan_card (int bus, int dev, int func, g
p++;
}
- grub_printf ("Unknown graphic card: %x\n", pciid);
+ grub_printf (_("Unknown graphic card: %x\n"), pciid);
}
return 0;
This part contains incorrect English. Moreover these strings convey technical
data and I don't think they are worth translating. Actually I'll eliminate
fixvideo once we have setpci
@@ -99,7 +100,7 @@ static grub_command_t cmd_fixvideo;
GRUB_MOD_INIT(fixvideo)
{
cmd_fixvideo = grub_register_command ("fix_video", grub_cmd_fixvideo,
- 0, "Fix video problem.");
+ 0, _N("Fix video problem."));
Another unclear message. Just let this file be until we remove it.
}
=== modified file 'commands/efi/loadbios.c'
--- commands/efi/loadbios.c 2009-06-10 23:47:49 +0000
+++ commands/efi/loadbios.c 2009-12-06 16:43:12 +0000
@@ -23,6 +23,7 @@
#include <grub/efi/efi.h>
#include <grub/pci.h>
#include <grub/command.h>
+#include <grub/i18n.h>
static grub_efi_guid_t acpi_guid = GRUB_EFI_ACPI_TABLE_GUID;
static grub_efi_guid_t acpi2_guid = GRUB_EFI_ACPI_20_TABLE_GUID;
@@ -45,7 +46,7 @@ enable_rom_area (void)
rom_ptr = (grub_uint32_t *) VBIOS_ADDR;
if (*rom_ptr != BLANK_MEM)
{
- grub_printf ("ROM image present.\n");
+ grub_printf (_("ROM image present.\n"));
Incorrect English.
return 0;
}
@@ -62,7 +63,7 @@ enable_rom_area (void)
*rom_ptr = 0;
if (*rom_ptr != 0)
{
- grub_printf ("Can\'t enable rom area.\n");
+ grub_printf (_("Can\'t enable rom area.\n"));
Unclear
return 0;
}
@@ -199,11 +200,11 @@ static grub_command_t cmd_fakebios, cmd_
GRUB_MOD_INIT(loadbios)
{
cmd_fakebios = grub_register_command ("fakebios", grub_cmd_fakebios,
- 0, "fake bios.");
+ 0, _N("fake bios."));
Unclear.
cmd_loadbios = grub_register_command ("loadbios", grub_cmd_loadbios,
- "loadbios BIOS_DUMP [INT10_DUMP]",
- "Load bios dump.");
+ _N("loadbios BIOS_DUMP [INT10_DUMP]"),
+ _N("Load bios dump."));
}
GRUB_MOD_FINI(loadbios)
=== modified file 'commands/handler.c'
--- commands/handler.c 2009-05-04 03:49:08 +0000
+++ commands/handler.c 2009-12-06 17:17:28 +0000
@@ -23,6 +23,7 @@
#include <grub/term.h>
#include <grub/handler.h>
#include <grub/command.h>
+#include <grub/i18n.h>
static grub_err_t
grub_cmd_handler (struct grub_command *cmd,
@@ -95,16 +96,16 @@ GRUB_MOD_INIT(handler)
{
cmd_handler =
grub_register_command ("handler", grub_cmd_handler,
- "handler [class [handler]]",
- "List or select a handler");
+ N_("handler [class [handler]]"),
+ N_("List or select a handler"));
cmd_terminal_input =
grub_register_command ("terminal_input", grub_cmd_handler,
- "terminal_input [handler]",
- "List or select a handler");
+ N_("terminal_input [handler]"),
+ N_("List or select a handler"));
cmd_terminal_output =
grub_register_command ("terminal_output", grub_cmd_handler,
- "terminal_output [handler]",
- "List or select a handler");
+ N_("terminal_output [handler]"),
+ N_("List or select a handler"));
Help messages are both unclear and in last 2 cases incorrect
}
GRUB_MOD_FINI(handler)
@@ -94,8 +95,8 @@ GRUB_MOD_INIT(help)
{
cmd = grub_register_extcmd ("help", grub_cmd_help,
GRUB_COMMAND_FLAG_CMDLINE,
- "help [PATTERN ...]",
- "Show a help message.", 0);
+ N_("help [PATTERN ...]"),
+ N_("Show a help message."), 0);
}
GRUB_MOD_FINI(help)
=== modified file 'commands/i386/pc/vbeinfo.c'
--- commands/i386/pc/vbeinfo.c 2009-06-10 21:04:23 +0000
+++ commands/i386/pc/vbeinfo.c 2009-12-06 17:17:52 +0000
@@ -51,14 +52,15 @@ grub_cmd_vbeinfo (grub_command_t cmd __a
if (err != GRUB_ERR_NONE)
return err;
- grub_printf ("VBE info: version: %d.%d OEM software rev: %d.%d\n",
+ grub_printf (_("VBE info: version: %d.%d OEM software rev: %d.%d\n"),
controller_info.version >> 8,
controller_info.version & 0xFF,
controller_info.oem_software_rev >> 8,
controller_info.oem_software_rev & 0xFF);
/* The total_memory field is in 64 KiB units. */
- grub_printf (" total memory: %d KiB\n",
+ grub_printf (" ");
+ grub_printf (_("total memory: %d KiB\n"),
(controller_info.total_memory << 16) / 1024);
We may need ngettext for this one
@@ -136,7 +138,7 @@ grub_cmd_vbeinfo (grub_command_t cmd __a
/* Show mask and position details for direct color modes. */
if (mode_info_tmp.memory_model == GRUB_VBE_MEMORY_MODEL_DIRECT_COLOR)
- grub_printf (", mask: %d/%d/%d/%d pos: %d/%d/%d/%d",
+ grub_printf (_(", mask: %d/%d/%d/%d pos: %d/%d/%d/%d"),
Unclear out of context.
mode_info_tmp.red_mask_size,
mode_info_tmp.green_mask_size,
mode_info_tmp.blue_mask_size,
@@ -116,7 +117,7 @@ grub_cmd_vbetest (grub_command_t cmd __a
mode_info.blue_mask_size,
mode_info.blue_field_position);
- grub_printf ("Press any key to continue.\n");
+ grub_printf (_("Press any key to continue.\n"));
We have several "Press any key to continue." with different ending characters.
Can you change all them to single form?
@@ -29,7 +30,7 @@ grub_cmd_lsmmap (grub_command_t cmd __at
auto int NESTED_FUNC_ATTR hook (grub_uint64_t, grub_uint64_t, grub_uint32_t);
int NESTED_FUNC_ATTR hook (grub_uint64_t addr, grub_uint64_t size,
grub_uint32_t type)
{
- grub_printf ("base_addr = 0x%llx, length = 0x%llx, type = 0x%x\n",
+ grub_printf (_("base_addr = 0x%llx, length = 0x%llx, type = 0x%x\n"),
(long long) addr, (long long) size, type);
return 0;
Unclear
=== modified file 'commands/memrw.c'
--- commands/memrw.c 2009-05-04 03:49:08 +0000
+++ commands/memrw.c 2009-12-06 17:18:32 +0000
@@ -71,22 +72,22 @@ GRUB_MOD_INIT(memrw)
{
cmd_read_byte =
grub_register_command ("read_byte", grub_cmd_read,
- "read_byte ADDR", "read byte.");
+ _("read_byte ADDR"), _("read byte."));
cmd_read_word =
grub_register_command ("read_word", grub_cmd_read,
- "read_word ADDR", "read word.");
+ _("read_word ADDR"), _("read word."));
cmd_read_dword =
grub_register_command ("read_dword", grub_cmd_read,
- "read_dword ADDR", "read dword.");
+ _("read_dword ADDR"), _("read dword."));
cmd_write_byte =
grub_register_command ("write_byte", grub_cmd_write,
- "write_byte ADDR VALUE", "write byte.");
+ _("write_byte ADDR VALUE"), _("write byte."));
cmd_write_word =
grub_register_command ("write_word", grub_cmd_write,
- "write_word ADDR VALUE", "write word.");
+ _("write_word ADDR VALUE"), _("write word."));
cmd_write_dword =
grub_register_command ("write_dword", grub_cmd_write,
- "write_dword ADDR VALUE", "write dword.");
+ _("write_dword ADDR VALUE"), _("write dword."));
}
Unclear.
=== modified file 'commands/minicmd.c'
--- commands/minicmd.c 2009-11-19 10:39:14 +0000
+++ commands/minicmd.c 2009-12-06 17:55:39 +0000
@@ -133,7 +134,7 @@ grub_mini_cmd_root (struct grub_command
if (grub_errno == GRUB_ERR_UNKNOWN_FS)
grub_errno = GRUB_ERR_NONE;
- grub_printf ("(%s): Filesystem is %s.\n",
+ grub_printf (_("((%s): Filesystem is %s.\n"),
grub_env_get ("root"), fs ? fs->name : "unknown");
grub_device_close (dev);
string with unknown has to be separate:
if (fs)
grub_printf (_("((%s): Filesystem is %s.\n"),
grub_env_get ("root"), fs->name);
else
grub_printf (_("((%s): Filesystem is unknown.\n"),
grub_env_get ("root"));
@@ -354,28 +355,28 @@ GRUB_MOD_INIT(minicmd)
{
cmd_cat =
grub_register_command ("cat", grub_mini_cmd_cat,
- "cat FILE", "show the contents of a file");
+ N_("cat FILE"), N_("show the contents of a file"));
cmd_help =
grub_register_command ("help", grub_mini_cmd_help,
- 0, "show this message");
+ 0, N_("show this message"));
cmd_root =
grub_register_command ("root", grub_mini_cmd_root,
- "root [DEVICE]", "set the root device");
+ N_("root [DEVICE]"), N_("set the root device"));
cmd_dump =
grub_register_command ("dump", grub_mini_cmd_dump,
- "dump ADDR", "dump memory");
+ N_("dump ADDR"), N_("dump memory"));
cmd_rmmod =
grub_register_command ("rmmod", grub_mini_cmd_rmmod,
- "rmmod MODULE", "remove a module");
+ N_("rmmod MODULE"), N_("remove a module"));
cmd_lsmod =
grub_register_command ("lsmod", grub_mini_cmd_lsmod,
- 0, "show loaded modules");
+ 0, N_("show loaded modules"));
cmd_exit =
grub_register_command ("exit", grub_mini_cmd_exit,
- 0, "exit from GRUB");
+ 0, N_("exit from GRUB"));
cmd_clear =
grub_register_command ("clear", grub_mini_cmd_clear,
- 0, "clear the screen");
+ 0, N_("clear the screen"));
}
This part is constrained but I guess we should capitalize first letter and add
a dot however
static char helpmsg[] =
- "perform COMMANDS on partition.\n"
+ N_("perform COMMANDS on partition.\n"
Missing capitalization and dot (my fault).
"Use \"parttool PARTITION help\" for the list "
- "of available commands";
+ "of available commands");
int
grub_parttool_register(const char *part_name,
=== modified file 'commands/reboot.c'
--- commands/reboot.c 2009-12-03 23:07:29 +0000
+++ commands/reboot.c 2009-12-06 17:21:03 +0000
@@ -20,6 +20,7 @@
#include <grub/dl.h>
#include <grub/command.h>
#include <grub/misc.h>
+#include <grub/i18n.h>
static grub_err_t
grub_cmd_reboot (grub_command_t cmd __attribute__ ((unused)),
@@ -35,7 +36,7 @@ static grub_command_t cmd;
GRUB_MOD_INIT(reboot)
{
cmd = grub_register_command ("reboot", grub_cmd_reboot,
- 0, "Reboot the computer");
+ 0, N_("Reboot the computer"));
Missing dot. I stop reporting missing dots and capitals.
=== modified file 'commands/usbtest.c'
--- commands/usbtest.c 2009-06-10 21:04:23 +0000
+++ commands/usbtest.c 2009-12-06 17:33:53 +0000
@@ -24,6 +24,7 @@
#include <grub/dl.h>
#include <grub/usb.h>
#include <grub/command.h>
+#include <grub/i18n.h>
static const char *usb_classes[] =
{
@@ -86,14 +87,14 @@ usb_iterate (grub_usb_device_t dev)
usb_print_str ("Serial", dev, descdev->strserial);
if (descdev->class > 0 && descdev->class <= 0x0E)
- grub_printf ("Class: (0x%02x) %s, Subclass: 0x%02x, Protocol: 0x%02x\n",
+ grub_printf (_("Class: (0x%02x) %s, Subclass: 0x%02x, Protocol: 0x%02x\n"),
descdev->class, usb_classes[descdev->class],
descdev->subclass, descdev->protocol);
- grub_printf ("USB version %d.%d, VendorID: 0x%02x, ProductID: 0x%02x, #conf:
%d\n",
+ grub_printf (_("USB version %d.%d, VendorID: 0x%02x, ProductID: 0x%02x,
#conf: %d\n"),
descdev->usbrel >> 8, (descdev->usbrel >> 4) & 0x0F,
descdev->vendorid, descdev->prodid, descdev->configcnt);
- grub_printf ("%s speed device\n", usb_devspeed[dev->speed]);
+ grub_printf (_("%s speed device\n"), usb_devspeed[dev->speed]);
I'm not sure it's good to translate this but if you do translate strings like
"Full speed device."
--
Regards
Vladimir 'φ-coder/phcoder' Serbinenko
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel
