On Sun, Jun 15, 2008 at 11:33:32PM +0200, Robert Millan wrote:
>
> Any comments?
Ah, and usually it helps if I remember to attach things :-)
--
Robert Millan
<GPLv2> I know my rights; I want my phone call!
<DRM> What good is a phone call… if you are unable to speak?
(as seen on /.)
2008-06-15 Robert Millan <[EMAIL PROTECTED]>
* util/i386/pc/grub-install.in: If the drive is LVM or RAID, prepend
it in prefix.
* util/i386/pc/grub-setup.c (main): Don't handle prefix at all. Set
`must_embed' to 1 when root_dev is a RAID device. When dest_dev is
a RAID device, run setup() for all members independently on whether
LVM abstraction is being used.
(setup): Don't handle prefix at all; let grub-mkimage take care of it.
If grub-mkimage has set `*install_dos_part == -2', don't override this
value.
Perform *install_dos_part adjustments independently on whether
we're embedding or not.
Clarify error message when image is too big for embedding.
Remove duplicate *install_dos_part stanza.
diff -x ChangeLog -x configure -x config.h.in -x CVS -x '*~' -x '*.mk' -urp ../grub2/util/i386/pc/grub-install.in ./util/i386/pc/grub-install.in
--- ../grub2/util/i386/pc/grub-install.in 2008-06-14 21:05:20.000000000 +0200
+++ ./util/i386/pc/grub-install.in 2008-06-15 20:25:27.000000000 +0200
@@ -231,10 +231,18 @@ partmap_module=`$grub_probe --target=par
# Device abstraction module, if any (lvm, raid).
devabstraction_module=`$grub_probe --target=abstraction --device ${grub_device}`
+if [ "x${devabstraction_module}" = "x" ] ; then
+ prefix_drive=
+else
+ prefix_drive=`$grub_probe --target=drive --device ${grub_device}`
+fi
+
# The order in this list is critical. Be careful when modifiing it.
modules="$modules $fs_module $partmap_module biosdisk $devabstraction_module"
-$grub_mkimage --output=${grubdir}/core.img --prefix=`make_system_path_relative_to_its_root ${grubdir}`/ $modules || exit 1
+$grub_mkimage --output=${grubdir}/core.img \
+ --prefix=${prefix_drive}`make_system_path_relative_to_its_root ${grubdir}`/ \
+ $modules || exit 1
# Now perform the installation.
$grub_setup --directory=${grubdir} --device-map=${device_map} \
diff -x ChangeLog -x configure -x config.h.in -x CVS -x '*~' -x '*.mk' -urp ../grub2/util/i386/pc/grub-setup.c ./util/i386/pc/grub-setup.c
--- ../grub2/util/i386/pc/grub-setup.c 2008-06-14 13:34:09.000000000 +0200
+++ ./util/i386/pc/grub-setup.c 2008-06-15 20:55:43.000000000 +0200
@@ -87,7 +87,7 @@ grub_refresh (void)
}
static void
-setup (const char *prefix, const char *dir,
+setup (const char *dir,
const char *boot_file, const char *core_file,
const char *root, const char *dest, int must_embed)
{
@@ -101,7 +101,6 @@ setup (const char *prefix, const char *d
grub_uint16_t *boot_drive_check;
struct boot_blocklist *first_block, *block;
grub_int32_t *install_dos_part, *install_bsd_part;
- char *install_prefix;
char *tmp_img;
int i;
grub_disk_addr_t first_sector;
@@ -234,8 +233,6 @@ setup (const char *prefix, const char *d
+ GRUB_KERNEL_MACHINE_INSTALL_DOS_PART);
install_bsd_part = (grub_int32_t *) (core_img + GRUB_DISK_SECTOR_SIZE
+ GRUB_KERNEL_MACHINE_INSTALL_BSD_PART);
- install_prefix = (core_img + GRUB_DISK_SECTOR_SIZE
- + GRUB_KERNEL_MACHINE_PREFIX);
/* Open the root device and the destination device. */
root_dev = grub_device_open (root);
@@ -274,6 +271,40 @@ setup (const char *prefix, const char *d
if (dest_dev->disk->id & 0x80)
/* Replace the jmp (2 bytes) with double nop's. */
*boot_drive_check = 0x9090;
+
+ /* If we hardcoded drive as part of prefix, we don't want to
+ override the current setting. */
+ if (*install_dos_part != -2)
+ {
+ /* Embed information about the installed location. */
+ if (root_dev->disk->partition)
+ {
+ if (strcmp (root_dev->disk->partition->partmap->name,
+ "pc_partition_map") == 0)
+ {
+ struct grub_pc_partition *pcdata =
+ root_dev->disk->partition->data;
+ *install_dos_part
+ = grub_cpu_to_le32 (pcdata->dos_part);
+ *install_bsd_part
+ = grub_cpu_to_le32 (pcdata->bsd_part);
+ }
+ else if (strcmp (root_dev->disk->partition->partmap->name,
+ "gpt_partition_map") == 0)
+ {
+ *install_dos_part = grub_cpu_to_le32 (root_dev->disk->partition->index);
+ *install_bsd_part = grub_cpu_to_le32 (-1);
+ }
+ else
+ grub_util_error ("No PC style partitions found");
+ }
+ else
+ *install_dos_part = *install_bsd_part = grub_cpu_to_le32 (-1);
+ }
+
+ grub_util_info ("dos partition is %d, bsd partition is %d",
+ grub_le_to_cpu32 (*install_dos_part),
+ grub_le_to_cpu32 (*install_bsd_part));
/* If the destination device can have partitions and it is the MBR,
try to embed the core image into after the MBR. */
@@ -299,39 +330,6 @@ setup (const char *prefix, const char *d
block->len = 0;
block->segment = 0;
- /* Embed information about the installed location. */
- if (must_embed)
- *install_dos_part = *install_bsd_part = grub_cpu_to_le32 (-2);
- else if (root_dev->disk->partition)
- {
- if (strcmp (root_dev->disk->partition->partmap->name,
- "pc_partition_map") == 0)
- {
- struct grub_pc_partition *pcdata =
- root_dev->disk->partition->data;
- *install_dos_part
- = grub_cpu_to_le32 (pcdata->dos_part);
- *install_bsd_part
- = grub_cpu_to_le32 (pcdata->bsd_part);
- }
- else if (strcmp (root_dev->disk->partition->partmap->name,
- "gpt_partition_map") == 0)
- {
- *install_dos_part = grub_cpu_to_le32 (root_dev->disk->partition->index);
- *install_bsd_part = grub_cpu_to_le32 (-1);
- }
- else
- grub_util_error ("No PC style partitions found");
- }
- else
- *install_dos_part = *install_bsd_part = grub_cpu_to_le32 (-1);
-
- grub_util_info ("dos partition is %d, bsd partition is %d, prefix is %s",
- grub_le_to_cpu32 (*install_dos_part),
- grub_le_to_cpu32 (*install_bsd_part),
- prefix);
- strcpy (install_prefix, prefix);
-
/* Write the core image onto the disk. */
if (grub_disk_write (dest_dev->disk, embed_region.start, 0, core_size, core_img))
grub_util_error ("%s", grub_errmsg);
@@ -362,7 +360,7 @@ setup (const char *prefix, const char *d
able_to_embed = 0;
if (must_embed && ! able_to_embed)
- grub_util_error ("Can't embed the core image, but this is required when\n"
+ grub_util_error ("Core image is too big for embedding, but this is required when\n"
"the root device is on a RAID array or LVM volume.");
/* The core image must be put on a filesystem unfortunately. */
@@ -370,7 +368,7 @@ setup (const char *prefix, const char *d
/* Make sure that GRUB reads the identical image as the OS. */
tmp_img = xmalloc (core_size);
- core_path = grub_util_get_path (prefix, core_file);
+ core_path = grub_util_get_path (DEFAULT_DIRECTORY "core.img", core_file);
/* It is a Good Thing to sync two times. */
sync ();
@@ -488,38 +486,6 @@ setup (const char *prefix, const char *d
the boot device. */
*root_drive = 0xFF;
- /* Embed information about the installed location. */
- if (root_dev->disk->partition)
- {
- struct grub_pc_partition *pcdata =
- root_dev->disk->partition->data;
-
- if (strcmp (root_dev->disk->partition->partmap->name,
- "pc_partition_map") == 0)
- {
- *install_dos_part
- = grub_cpu_to_le32 (pcdata->dos_part);
- *install_bsd_part
- = grub_cpu_to_le32 (pcdata->bsd_part);
- }
- else if (strcmp (root_dev->disk->partition->partmap->name,
- "gpt_partition_map") == 0)
- {
- *install_dos_part = grub_cpu_to_le32 (root_dev->disk->partition->index);
- *install_bsd_part = grub_cpu_to_le32 (-1);
- }
- else
- grub_util_error ("No PC style partitions found");
- }
- else
- *install_dos_part = *install_bsd_part = grub_cpu_to_le32 (-1);
-
- grub_util_info ("dos partition is %d, bsd partition is %d, prefix is %s",
- grub_le_to_cpu32 (*install_dos_part),
- grub_le_to_cpu32 (*install_bsd_part),
- prefix);
- strcpy (install_prefix, prefix);
-
/* Write the first two sectors of the core image onto the disk. */
core_path = grub_util_get_path (dir, core_file);
grub_util_info ("opening the core image `%s'", core_path);
@@ -608,7 +574,6 @@ main (int argc, char *argv[])
char *dir = 0;
char *dev_map = 0;
char *root_dev = 0;
- char *prefix;
char *dest_dev;
int must_embed = 0;
@@ -714,8 +679,6 @@ main (int argc, char *argv[])
/* For simplicity. */
dest_dev = xstrdup (dest_dev);
- prefix = grub_get_prefix (dir ? : DEFAULT_DIRECTORY);
-
if (root_dev)
{
char *tmp = get_device_name (root_dev);
@@ -740,44 +703,35 @@ main (int argc, char *argv[])
#ifdef __linux__
if (grub_util_lvm_isvolume (root_dev))
+ must_embed = 1;
+
+ if (root_dev[0] == 'm' && root_dev[1] == 'd'
+ && root_dev[2] >= '0' && root_dev[2] <= '9')
{
- char *newprefix;
+ /* FIXME: we can avoid this on RAID1. */
must_embed = 1;
-
- newprefix = xmalloc (1 + strlen (root_dev) + 1 + strlen (prefix) + 1);
- sprintf (newprefix, "(%s)%s", root_dev, prefix);
- free (prefix);
- prefix = newprefix;
}
- else if (dest_dev[0] == 'm' && dest_dev[1] == 'd'
- && dest_dev[2] >= '0' && dest_dev[2] <= '9')
+
+ if (dest_dev[0] == 'm' && dest_dev[1] == 'd'
+ && dest_dev[2] >= '0' && dest_dev[2] <= '9')
{
char **devicelist;
- char *raid_prefix;
int i;
- raid_prefix = xmalloc (1 + strlen (dest_dev) + 1 + strlen (prefix) + 1);
-
- sprintf (raid_prefix, "(%s)%s", dest_dev, prefix);
-
devicelist = grub_util_raid_getmembers (dest_dev);
for (i = 0; devicelist[i]; i++)
{
- setup (raid_prefix,
- dir ? : DEFAULT_DIRECTORY,
+ setup (dir ? : DEFAULT_DIRECTORY,
boot_file ? : DEFAULT_BOOT_FILE,
core_file ? : DEFAULT_CORE_FILE,
root_dev, grub_util_get_grub_dev (devicelist[i]), 1);
}
-
- free (raid_prefix);
}
else
#endif
/* Do the real work. */
- setup (prefix,
- dir ? : DEFAULT_DIRECTORY,
+ setup (dir ? : DEFAULT_DIRECTORY,
boot_file ? : DEFAULT_BOOT_FILE,
core_file ? : DEFAULT_CORE_FILE,
root_dev, dest_dev, must_embed);
@@ -791,7 +745,6 @@ main (int argc, char *argv[])
free (dir);
free (dev_map);
free (root_dev);
- free (prefix);
free (dest_dev);
return 0;
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
