Okay, the first thing I notice in the list of the files installed by libcurl-gnutls <https://archlinux.org/packages/core/x86_64/libcurl-gnutls/files/> is that there is no libcurl-gnutls.pc file. Do you think there is a way to check without passing through pkgconf?
On Tue, Sep 6, 2022 at 1:47 PM madmurphy <madmurphy...@gmail.com> wrote: > I will try to check the configure.ac file. I don't get an error btw, only > that "curl-openssl" http client... > > On Tue, Sep 6, 2022 at 1:45 PM Schanzenbach, Martin < > mschanzenb...@posteo.de> wrote: > >> Yes. I *think* I have found a better way to check for this and it should >> be compatible with debian as well. >> >> BR >> >> > On 6. Sep 2022, at 12:32, madmurphy <madmurphy...@gmail.com> wrote: >> > >> > Hi Martin, >> > >> > If "normal" curl is found, the check for curl-gnutls is skipped. >> > I guess we should prefer curl-gnutls. >> > Yes, libcurl-gnutls should be checked first. Also because apparently >> Arch is not the only distro that has a split package of cURL linked against >> GNU TLS… >> > >> > --madmurphy >> > >> > >> > On Tue, Sep 6, 2022 at 9:59 AM Schanzenbach, Martin < >> mschanzenb...@posteo.de> wrote: >> > Ah sorry I just checked: >> > If "normal" curl is found, the check for curl-gnutls is skipped. >> > I guess we should prefer curl-gnutls. >> > >> > Br >> > >> > > On 6. Sep 2022, at 10:51, Schanzenbach, Martin < >> mschanzenb...@posteo.de> wrote: >> > > >> > > Hi, >> > > >> > > check your config.log and check for the test against libcurl-gnutls. >> > > There should be test somewhere in there that fails for reasons. >> > > >> > > BR >> > > Martin >> > > >> > >> On 5. Sep 2022, at 20:21, madmurphy <madmurphy...@gmail.com> wrote: >> > >> >> > >> Hi Christian, >> > >> >> > >> I tried to run ./configure twice. The first time I had installed on >> my machine curl (which is linked against openssl) and gnurl, but I did not >> have libcurl-gnutls installed. Under these conditions at the end of the >> configure script I got printed: >> > >> >> > >> ... >> > >> HTTP Client: gnurl >> > >> ... >> > >> >> > >> The second time I had curl and libcurl-gnutls installed, but gnurl >> was not installed. Under these conditions at the end of the configure >> script I got printed: >> > >> >> > >> ... >> > >> HTTP Client: curl-openssl >> > >> ... >> > >> >> > >> For some reasons in the second scenario the configure script sees >> the curl package but does not see libcurl-gnutls and so the latter is not >> used (I guess). The files shipped by the latter are: >> > >> >> > >> /usr/ >> > >> /usr/lib/ >> > >> /usr/lib/libcurl-gnutls.so.3 >> > >> /usr/lib/libcurl-gnutls.so.4 >> > >> /usr/lib/libcurl-gnutls.so.4.0.0 >> > >> /usr/lib/libcurl-gnutls.so.4.1.0 >> > >> /usr/lib/libcurl-gnutls.so.4.2.0 >> > >> /usr/lib/libcurl-gnutls.so.4.3.0 >> > >> /usr/lib/libcurl-gnutls.so.4.4.0 >> > >> /usr/lib/libcurl-gnutls.so.4.5.0 >> > >> /usr/lib/libcurl-gnutls.so.4.6.0 >> > >> /usr/lib/libcurl-gnutls.so.4.7.0 >> > >> /usr/lib/libcurl-gnutls.so.4.8.0 >> > >> /usr/share/ >> > >> /usr/share/licenses/ >> > >> /usr/share/licenses/libcurl-gnutls >> > >> >> > >> How can we ensure that the configure script correctly sees the >> libcurl-gnutls package? >> > >> >> > >> I paste below both complete outputs. >> > >> >> > >> Installed: curl, gnurl >> > >> Not installed: libcurl-gnutls: >> > >> >> > >> $ ./configure >> > >> checking build system type... x86_64-pc-linux-gnu >> > >> checking host system type... x86_64-pc-linux-gnu >> > >> checking target system type... x86_64-pc-linux-gnu >> > >> checking for a BSD-compatible install... /usr/bin/install -c >> > >> checking whether build environment is sane... yes >> > >> checking for a race-free mkdir -p... /usr/bin/mkdir -p >> > >> checking for gawk... gawk >> > >> checking whether make sets $(MAKE)... yes >> > >> checking whether make supports nested variables... yes >> > >> checking whether UID '1000' is supported by ustar format... yes >> > >> checking whether GID '1000' is supported by ustar format... yes >> > >> checking how to create a ustar tar archive... gnutar >> > >> checking whether make supports nested variables... (cached) yes >> > >> checking for gawk... (cached) gawk >> > >> checking for gcc... gcc >> > >> checking whether the C compiler works... yes >> > >> checking for C compiler default output file name... a.out >> > >> checking for suffix of executables... >> > >> checking whether we are cross compiling... no >> > >> checking for suffix of object files... o >> > >> checking whether the compiler supports GNU C... yes >> > >> checking whether gcc accepts -g... yes >> > >> checking for gcc option to enable C11 features... none needed >> > >> checking whether gcc understands -c and -o together... yes >> > >> checking whether make supports the include directive... yes (GNU >> style) >> > >> checking dependency style of gcc... gcc3 >> > >> checking whether gcc and cc understand -c and -o together... yes >> > >> checking whether ln -s works... yes >> > >> checking whether make sets $(MAKE)... (cached) yes >> > >> checking for pkg-config... /usr/bin/pkg-config >> > >> checking pkg-config is at least version 0.29.2... yes >> > >> checking how to print strings... printf >> > >> checking for a sed that does not truncate output... /usr/bin/sed >> > >> checking for grep that handles long lines and -e... /usr/bin/grep >> > >> checking for egrep... /usr/bin/grep -E >> > >> checking for fgrep... /usr/bin/grep -F >> > >> checking for ld used by gcc... /usr/bin/ld >> > >> checking if the linker (/usr/bin/ld) is GNU ld... yes >> > >> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B >> > >> checking the name lister (/usr/bin/nm -B) interface... BSD nm >> > >> checking the maximum length of command line arguments... 1572864 >> > >> checking how to convert x86_64-pc-linux-gnu file names to >> x86_64-pc-linux-gnu format... func_convert_file_noop >> > >> checking how to convert x86_64-pc-linux-gnu file names to toolchain >> format... func_convert_file_noop >> > >> checking for /usr/bin/ld option to reload object files... -r >> > >> checking for file... file >> > >> checking for objdump... objdump >> > >> checking how to recognize dependent libraries... pass_all >> > >> checking for dlltool... no >> > >> checking how to associate runtime and link libraries... printf %s\n >> > >> checking for ar... ar >> > >> checking for archiver @FILE support... @ >> > >> checking for strip... strip >> > >> checking for ranlib... ranlib >> > >> checking command to parse /usr/bin/nm -B output from gcc object... ok >> > >> checking for sysroot... no >> > >> checking for a working dd... /usr/bin/dd >> > >> checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 >> > >> checking for mt... no >> > >> checking if : is a manifest tool... no >> > >> checking for stdio.h... yes >> > >> checking for stdlib.h... yes >> > >> checking for string.h... yes >> > >> checking for inttypes.h... yes >> > >> checking for stdint.h... yes >> > >> checking for strings.h... yes >> > >> checking for sys/stat.h... yes >> > >> checking for sys/types.h... yes >> > >> checking for unistd.h... yes >> > >> checking for vfork.h... no >> > >> checking for dlfcn.h... yes >> > >> checking for objdir... .libs >> > >> checking if gcc supports -fno-rtti -fno-exceptions... no >> > >> checking for gcc option to produce PIC... -fPIC -DPIC >> > >> checking if gcc PIC flag -fPIC -DPIC works... yes >> > >> checking if gcc static flag -static works... yes >> > >> checking if gcc supports -c -o file.o... yes >> > >> checking if gcc supports -c -o file.o... (cached) yes >> > >> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports >> shared libraries... yes >> > >> checking whether -lc should be explicitly linked in... no >> > >> checking dynamic linker characteristics... GNU/Linux ld.so >> > >> checking how to hardcode library paths into programs... immediate >> > >> checking for shl_load... no >> > >> checking for shl_load in -ldld... no >> > >> checking for dlopen... yes >> > >> checking whether a program can dlopen itself... yes >> > >> checking whether a statically linked program can dlopen itself... no >> > >> checking whether stripping libraries is possible... yes >> > >> checking if libtool supports shared libraries... yes >> > >> checking whether to build shared libraries... yes >> > >> checking whether to build static libraries... no >> > >> checking for special C compiler options needed for large files... no >> > >> checking for _FILE_OFFSET_BITS value needed for large files... no >> > >> checking for _LARGEFILE_SOURCE value needed for large files... no >> > >> checking whether unaligned 64-bit access works... yes >> > >> checking if gcc supports -fno-strict-aliasing... yes >> > >> checking if gcc supports -Wno-address-of-packed-member... yes >> > >> checking if gcc supports >> -Wno-tautological-constant-out-of-range-compare... no >> > >> checking how to run the C preprocessor... gcc -E >> > >> checking for X... libraries , headers >> > >> checking for gethostbyname... yes >> > >> checking for connect... yes >> > >> checking for remove... yes >> > >> checking for shmat... yes >> > >> checking for IceConnectionNumber in -lICE... yes >> > >> checking for build target... linux >> > >> checking for library containing gethostbyname... none required >> > >> checking for library containing memchr... none required >> > >> checking for library containing memset_s... no >> > >> checking for library containing explicit_bzero... none required >> > >> checking for socket in -lsocket... no >> > >> checking for log in -lm... yes >> > >> checking for getloadavg... yes >> > >> checking for getopt... true >> > >> checking for pkgconf... /usr/bin/pkg-config >> > >> checking for ssh... true >> > >> checking for SSH key... no >> > >> checking for a Python interpreter with version >= 3.4... python >> > >> checking for python... /usr/bin/python >> > >> checking for python version... 3.10 >> > >> checking for python platform... linux >> > >> checking for GNU default python prefix... ${prefix} >> > >> checking for GNU default python exec_prefix... ${exec_prefix} >> > >> checking for python script directory (pythondir)... >> ${PYTHON_PREFIX}/lib/python3.10/site-packages >> > >> checking for python extension module directory (pyexecdir)... >> ${PYTHON_EXEC_PREFIX}/lib/python3.10/site-packages >> > >> checking for perl... /usr/bin/perl >> > >> checking for pdflatex... pdflatex >> > >> checking for the TikZ package for LaTeX... yes >> > >> checking for pdflatex... (cached) pdflatex >> > >> checking for the QR Code package for LaTeX... no >> > >> checking for pdflatex... (cached) pdflatex >> > >> checking for the Labels package for LaTeX... yes >> > >> checking for -iptables... no >> > >> checking for iptables... /usr/bin/iptables >> > >> checking for -ip6tables... no >> > >> checking for ip6tables... /usr/bin/ip6tables >> > >> checking for -ip... no >> > >> checking for ip... /usr/bin/ip >> > >> checking for -ifconfig... no >> > >> checking for ifconfig... /usr/bin/ifconfig >> > >> checking for adduser... false >> > >> checking for -sysctl... no >> > >> checking for sysctl... /usr/bin/sysctl >> > >> checking for -upnpc... no >> > >> checking for upnpc... /usr/bin/upnpc >> > >> checking for checkbashisms... no >> > >> checking for checkbashisms.pl... no >> > >> checking for uncrustify... false >> > >> checking for yapf... no >> > >> checking for struct tm.tm_gmtoff... yes >> > >> checking for getaddrinfo_a in -lanl... yes >> > >> checking for libgcrypt-config... /usr/bin/libgcrypt-config >> > >> checking for LIBGCRYPT - version >= 1.6.0... yes (1.10.1-unknown) >> > >> checking LIBGCRYPT API version... okay >> > >> checking for gcc options needed to detect all undeclared >> functions... none needed >> > >> checking whether gcry_mpi_set_opaque_copy is declared... yes >> > >> checking for if_tun.h... no >> > >> checking for linux/if_tun.h... yes >> > >> checking whether struct in6_ifreq is declared... no >> > >> checking for sphinx-build... true >> > >> checking for mandoc... no >> > >> checking for a working HMAC... yes >> > >> checking for static assertion support... yes >> > >> checking for bluetooth/bluetooth.h... yes >> > >> checking for ba2str in -lbluetooth... yes >> > >> checking for zbar.h... yes >> > >> checking for zbar_processor_create in -lzbar... yes >> > >> checking for png.h... yes >> > >> checking for png_create_read_struct in -lpng... yes >> > >> checking for pabc/pabc.h... yes >> > >> checking for pabc_new_ctx in -lpabc... no >> > >> checking for jansson.h... yes >> > >> checking for json_loads in -ljansson... yes >> > >> checking for jose/jose.h... yes >> > >> checking for jose_jwk_gen in -ljose... yes >> > >> checking for pulse/simple.h... yes >> > >> checking for pa_stream_peek in -lpulse... yes >> > >> checking for opus/opus.h... yes >> > >> checking for opus_decode_float in -lopus... yes >> > >> checking for ogg/ogg.h... yes >> > >> checking for ogg_stream_flush_fill in -logg... yes >> > >> checking for GST... yes >> > >> checking for conversation feature set to build... pulse >> > >> checking for gawk... (cached) gawk >> > >> checking for gnurl-config... /usr/bin/gnurl-config >> > >> checking for the version of libgnurl... 7.72.0 >> > >> checking for libgnurl >= version 7.34.0... yes >> > >> checking whether libgnurl is usable... yes >> > >> checking for curl_free... yes >> > >> checking for library containing __atomic_load_8... -latomic >> > >> checking for nss.h... yes >> > >> checking whether NSS_STATUS_UNAVAIL is declared... yes >> > >> checking for kvm_open in -lkvm... no >> > >> checking for kstat_open in -lkstat... no >> > >> checking for sodium.h... yes >> > >> checking for crypto_core_ed25519_scalar_mul in -lsodium... yes >> > >> checking for extractor.h... yes >> > >> checking for EXTRACTOR_plugin_add_defaults in -lextractor... yes >> > >> checking for ltdl.h... yes >> > >> checking for lt_dlopenext in -lltdl... yes >> > >> checking for idn2.h... yes >> > >> checking for idn2_to_unicode_8z8z in -lidn2... yes >> > >> checking for zlib.h... yes >> > >> checking for compress2 in -lz... yes >> > >> checking for ld used by gcc... /usr/bin/ld -m elf_x86_64 >> > >> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes >> > >> checking for shared library run path origin... done >> > >> checking for iconv... yes >> > >> checking for working iconv... yes >> > >> checking for iconv declaration... >> > >> extern size_t iconv (iconv_t cd, char * *inbuf, size_t >> *inbytesleft, char * *outbuf, size_t *outbytesleft); >> > >> checking for libunistring... yes >> > >> checking how to link with libunistring... /usr/lib/libunistring.so >> > >> checking for libunistring version... 1.0.0 >> > >> checking for sqlite3.h... yes >> > >> checking for sqlite3_open in -lsqlite3... yes >> > >> checking for pkg-config... (cached) /usr/bin/pkg-config >> > >> checking pkg-config is at least version 0.9.0... yes >> > >> checking for the PostgreSQL libraries CPPFLAGS... >> > >> checking for the PostgreSQL libraries LDFLAGS... >> > >> checking for the PostgreSQL libraries LIBS... -lpq >> > >> checking for the PostgreSQL version... 14.5 >> > >> checking for libpq-fe.h... yes >> > >> checking for the PostgreSQL library linking is working... yes >> > >> checking for libpq-fe.h... (cached) yes >> > >> checking for mysql_init in -lmysqlclient... no >> > >> checking for MHD... yes >> > >> checking for gnutls/abstract.h... yes >> > >> checking for gnutls_priority_set in -lgnutls... yes >> > >> checking for gnutls/dane.h... no >> > >> checking for dirent.h that defines DIR... yes >> > >> checking for library containing opendir... none required >> > >> checking for fcntl.h... yes >> > >> checking for math.h... yes >> > >> checking for errno.h... yes >> > >> checking for ctype.h... yes >> > >> checking for limits.h... yes >> > >> checking for stdarg.h... yes >> > >> checking for signal.h... yes >> > >> checking for locale.h... yes >> > >> checking for stdatomic.h... yes >> > >> checking for malloc.h... yes >> > >> checking for malloc/malloc.h... no >> > >> checking for malloc/malloc_np.h... no >> > >> checking for langinfo.h... yes >> > >> checking for sys/param.h... yes >> > >> checking for sys/mount.h... yes >> > >> checking for sys/statvfs.h... yes >> > >> checking for sys/select.h... yes >> > >> checking for sockLib.h... no >> > >> checking for sys/mman.h... yes >> > >> checking for sys/msg.h... yes >> > >> checking for sys/vfs.h... yes >> > >> checking for arpa/inet.h... yes >> > >> checking for libintl.h... yes >> > >> checking for netdb.h... yes >> > >> checking for netinet/in.h... yes >> > >> checking for sys/ioctl.h... yes >> > >> checking for sys/socket.h... yes >> > >> checking for sys/time.h... yes >> > >> checking for sys/sysinfo.h... yes >> > >> checking for sys/file.h... yes >> > >> checking for sys/resource.h... yes >> > >> checking for ifaddrs.h... yes >> > >> checking for mach/mach.h... no >> > >> checking for sys/timeb.h... yes >> > >> checking for argz.h... yes >> > >> checking for ucred.h... no >> > >> checking for sys/ucred.h... no >> > >> checking for endian.h... yes >> > >> checking for sys/endian.h... no >> > >> checking for execinfo.h... yes >> > >> checking for byteswap.h... yes >> > >> checking whether NLS is requested... yes >> > >> checking for msgfmt... /usr/bin/msgfmt >> > >> checking for gmsgfmt... /usr/bin/msgfmt >> > >> checking for xgettext... /usr/bin/xgettext >> > >> checking for msgmerge... /usr/bin/msgmerge >> > >> checking for CFPreferencesCopyAppValue... no >> > >> checking for CFLocaleCopyCurrent... no >> > >> checking for GNU gettext in libc... yes >> > >> checking whether to use NLS... yes >> > >> checking where the gettext function comes from... libc >> > >> checking for pid_t... yes >> > >> checking for size_t... yes >> > >> checking for mode_t... yes >> > >> checking whether stat file-mode macros are broken... no >> > >> checking for _Bool... yes >> > >> checking for stdbool.h that conforms to C99... yes >> > >> checking whether struct tm is in sys/time.h or time.h... time.h >> > >> checking for struct sockaddr_in.sin_len... no >> > >> checking for struct sockaddr_un.sun_len... no >> > >> checking for off_t... yes >> > >> checking for uid_t in sys/types.h... yes >> > >> checking for fork... yes >> > >> checking for vfork... yes >> > >> checking for working fork... yes >> > >> checking for working vfork... (cached) yes >> > >> checking for working chown... yes >> > >> checking for atoll... yes >> > >> checking for stat64... yes >> > >> checking for strnlen... yes >> > >> checking for mremap... yes >> > >> checking for getrlimit... yes >> > >> checking for setrlimit... yes >> > >> checking for sysconf... yes >> > >> checking for initgroups... yes >> > >> checking for strndup... yes >> > >> checking for gethostbyname2... yes >> > >> checking for getpeerucred... no >> > >> checking for getpeereid... no >> > >> checking for setresuid... yes >> > >> checking for getifaddrs... yes >> > >> checking for freeifaddrs... yes >> > >> checking for getresgid... yes >> > >> checking for mallinfo2... yes >> > >> checking for malloc_size... no >> > >> checking for malloc_usable_size... yes >> > >> checking for getrusage... yes >> > >> checking for random... yes >> > >> checking for srandom... yes >> > >> checking for stat... yes >> > >> checking for statfs... yes >> > >> checking for statvfs... yes >> > >> checking for wait4... yes >> > >> checking for timegm... yes >> > >> checking for sudo... sudo >> > >> checking for doas... no >> > >> checking if __thread is supported... yes >> > >> checking for git... /usr/bin/git >> > >> checking if source is under a VCS... no >> > >> checking that generated files are newer than configure... done >> > >> configure: creating ./config.status >> > >> config.status: creating Makefile >> > >> config.status: creating bin/Makefile >> > >> config.status: creating contrib/Makefile >> > >> config.status: creating contrib/hellos/Makefile >> > >> config.status: creating contrib/services/Makefile >> > >> config.status: creating contrib/services/openrc/Makefile >> > >> config.status: creating contrib/services/systemd/Makefile >> > >> config.status: creating contrib/scripts/Makefile >> > >> config.status: creating contrib/scripts/gnunet-logread/Makefile >> > >> config.status: creating doc/Makefile >> > >> config.status: creating doc/man/Makefile >> > >> config.status: creating doc/doxygen/Makefile >> > >> config.status: creating m4/Makefile >> > >> config.status: creating po/Makefile.in >> > >> config.status: creating src/Makefile >> > >> config.status: creating src/arm/Makefile >> > >> config.status: creating src/arm/arm.conf >> > >> config.status: creating src/ats/Makefile >> > >> config.status: creating src/ats/ats.conf >> > >> config.status: creating src/ats-tool/Makefile >> > >> config.status: creating src/auction/Makefile >> > >> config.status: creating src/block/Makefile >> > >> config.status: creating src/cadet/Makefile >> > >> config.status: creating src/cadet/cadet.conf >> > >> config.status: creating src/core/Makefile >> > >> config.status: creating src/core/core.conf >> > >> config.status: creating src/consensus/Makefile >> > >> config.status: creating src/consensus/consensus.conf >> > >> config.status: creating src/conversation/Makefile >> > >> config.status: creating src/conversation/conversation.conf >> > >> config.status: creating src/curl/Makefile >> > >> config.status: creating src/datacache/Makefile >> > >> config.status: creating src/datastore/Makefile >> > >> config.status: creating src/datastore/datastore.conf >> > >> config.status: creating src/dht/Makefile >> > >> config.status: creating src/dht/dht.conf >> > >> config.status: creating src/dhtu/Makefile >> > >> config.status: creating src/dns/Makefile >> > >> config.status: creating src/dns/dns.conf >> > >> config.status: creating src/exit/Makefile >> > >> config.status: creating src/fragmentation/Makefile >> > >> config.status: creating src/fs/Makefile >> > >> config.status: creating src/fs/fs.conf >> > >> config.status: creating src/gns/Makefile >> > >> config.status: creating src/gns/gns.conf >> > >> config.status: creating src/gns/nss/Makefile >> > >> config.status: creating src/gnsrecord/Makefile >> > >> config.status: creating src/hello/Makefile >> > >> config.status: creating src/identity/Makefile >> > >> config.status: creating src/identity/identity.conf >> > >> config.status: creating src/include/Makefile >> > >> config.status: creating src/integration-tests/Makefile >> > >> config.status: creating src/json/Makefile >> > >> config.status: creating src/hostlist/Makefile >> > >> config.status: creating src/my/Makefile >> > >> config.status: creating src/mysql/Makefile >> > >> config.status: creating src/namecache/Makefile >> > >> config.status: creating src/namecache/namecache.conf >> > >> config.status: creating src/namestore/Makefile >> > >> config.status: creating src/namestore/namestore.conf >> > >> config.status: creating src/nat/Makefile >> > >> config.status: creating src/nat/nat.conf >> > >> config.status: creating src/nat-auto/Makefile >> > >> config.status: creating src/nat-auto/nat-auto.conf >> > >> config.status: creating src/nse/Makefile >> > >> config.status: creating src/nse/nse.conf >> > >> config.status: creating src/nt/Makefile >> > >> config.status: creating src/peerinfo/Makefile >> > >> config.status: creating src/peerinfo/peerinfo.conf >> > >> config.status: creating src/peerinfo-tool/Makefile >> > >> config.status: creating src/peerstore/Makefile >> > >> config.status: creating src/peerstore/peerstore.conf >> > >> config.status: creating src/pq/Makefile >> > >> config.status: creating src/pt/Makefile >> > >> config.status: creating src/regex/Makefile >> > >> config.status: creating src/regex/regex.conf >> > >> config.status: creating src/revocation/Makefile >> > >> config.status: creating src/revocation/revocation.conf >> > >> config.status: creating src/rps/Makefile >> > >> config.status: creating src/rps/rps.conf >> > >> config.status: creating src/secretsharing/Makefile >> > >> config.status: creating src/secretsharing/secretsharing.conf >> > >> config.status: creating src/scalarproduct/Makefile >> > >> config.status: creating src/scalarproduct/scalarproduct.conf >> > >> config.status: creating src/set/Makefile >> > >> config.status: creating src/set/set.conf >> > >> config.status: creating src/seti/Makefile >> > >> config.status: creating src/seti/seti.conf >> > >> config.status: creating src/setu/Makefile >> > >> config.status: creating src/setu/setu.conf >> > >> config.status: creating src/sq/Makefile >> > >> config.status: creating src/statistics/Makefile >> > >> config.status: creating src/statistics/statistics.conf >> > >> config.status: creating src/template/Makefile >> > >> config.status: creating src/testbed/Makefile >> > >> config.status: creating src/testbed/testbed.conf >> > >> config.status: creating src/testbed-logger/Makefile >> > >> config.status: creating src/testbed-logger/testbed-logger.conf >> > >> config.status: creating src/testing/Makefile >> > >> config.status: creating src/topology/Makefile >> > >> config.status: creating src/transport/Makefile >> > >> config.status: creating src/transport/transport.conf >> > >> config.status: creating src/util/Makefile >> > >> config.status: creating src/util/resolver.conf >> > >> config.status: creating src/vpn/Makefile >> > >> config.status: creating src/vpn/vpn.conf >> > >> config.status: creating src/zonemaster/Makefile >> > >> config.status: creating src/zonemaster/zonemaster.conf >> > >> config.status: creating src/rest/Makefile >> > >> config.status: creating src/abd/Makefile >> > >> config.status: creating src/abd/abd.conf >> > >> config.status: creating src/reclaim/Makefile >> > >> config.status: creating src/messenger/Makefile >> > >> config.status: creating src/messenger/messenger.conf >> > >> config.status: creating pkgconfig/Makefile >> > >> config.status: creating pkgconfig/gnunetarm.pc >> > >> config.status: creating pkgconfig/gnunetats.pc >> > >> config.status: creating pkgconfig/gnunetblock.pc >> > >> config.status: creating pkgconfig/gnunetcadet.pc >> > >> config.status: creating pkgconfig/gnunetconsensus.pc >> > >> config.status: creating pkgconfig/gnunetconversation.pc >> > >> config.status: creating pkgconfig/gnunetcore.pc >> > >> config.status: creating pkgconfig/gnunetdatacache.pc >> > >> config.status: creating pkgconfig/gnunetdatastore.pc >> > >> config.status: creating pkgconfig/gnunetdht.pc >> > >> config.status: creating pkgconfig/gnunetdns.pc >> > >> config.status: creating pkgconfig/gnunetenv.pc >> > >> config.status: creating pkgconfig/gnunetfragmentation.pc >> > >> config.status: creating pkgconfig/gnunetfs.pc >> > >> config.status: creating pkgconfig/gnunetgns.pc >> > >> config.status: creating pkgconfig/gnunethello.pc >> > >> config.status: creating pkgconfig/gnunetidentity.pc >> > >> config.status: creating pkgconfig/gnunetmicrophone.pc >> > >> config.status: creating pkgconfig/gnunetmysql.pc >> > >> config.status: creating pkgconfig/gnunetnamestore.pc >> > >> config.status: creating pkgconfig/gnunetnat.pc >> > >> config.status: creating pkgconfig/gnunetnse.pc >> > >> config.status: creating pkgconfig/gnunetpeerinfo.pc >> > >> config.status: creating pkgconfig/gnunetpq.pc >> > >> config.status: creating pkgconfig/gnunetregex.pc >> > >> config.status: creating pkgconfig/gnunetrevocation.pc >> > >> config.status: creating pkgconfig/gnunetrps.pc >> > >> config.status: creating pkgconfig/gnunetscalarproduct.pc >> > >> config.status: creating pkgconfig/gnunetset.pc >> > >> config.status: creating pkgconfig/gnunetspeaker.pc >> > >> config.status: creating pkgconfig/gnunetstatistics.pc >> > >> config.status: creating pkgconfig/gnunettestbed.pc >> > >> config.status: creating pkgconfig/gnunettesting.pc >> > >> config.status: creating pkgconfig/gnunettransport.pc >> > >> config.status: creating pkgconfig/gnunetutil.pc >> > >> config.status: creating pkgconfig/gnunetvpn.pc >> > >> config.status: creating gnunet_config.h >> > >> config.status: executing depfiles commands >> > >> config.status: executing libtool commands >> > >> config.status: executing po-directories commands >> > >> config.status: creating po/POTFILES >> > >> config.status: creating po/Makefile >> > >> configure: WARNING: GnuTLS lacks DANE support; validation using it >> will not be possible >> > >> configure: WARNING: Your version of Python is not supported, you >> might see issues >> > >> configure: >> > >> Detected system >> > >> =============== >> > >> >> > >> GNUnet version: 0.17.5 >> > >> >> > >> Host Setup: x86_64-pc-linux-gnu >> > >> Install Prefix: /usr >> > >> Compiler: gcc >> > >> CFLAGS: -march=x86-64 -mtune=generic -O2 >> -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat >> -Werror=format-security -fstack-clash-protection -fcf-protection >> -fno-strict-aliasing -Wno-address-of-packed-member >> > >> CPPFLAGS: >> > >> LDFLAGS: >> -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now >> -Wl,--unresolved-symbols=report-all >> > >> LIBS: -lm >> > >> Build Target: linux >> > >> >> > >> Default Interface: eth0 >> > >> >> > >> sqlite3: yes >> > >> MySQL: no >> > >> PostgreSQL: yes >> > >> >> > >> HTTP Client: gnurl >> > >> Bluetooth: yes >> > >> iptables: yes >> > >> ifconfig: yes >> > >> UPnPc: yes >> > >> GnuTLS: yes (without DANE support) >> > >> >> > >> LaTeX: yes >> > >> >> > >> libextractor: yes >> > >> libzbar: yes >> > >> libpng: yes >> > >> libidn: libidn2 >> > >> libopus: yes >> > >> libpulse: yes >> > >> gstreamer: no >> > >> >> > >> Java: no >> > >> >> > >> sphinx: yes >> > >> mandoc: no >> > >> >> > >> GNUnet configuration >> > >> ==================== >> > >> >> > >> Transports: tcp udp unix http wlan >> > >> Conversation: yes (pulse) >> > >> Database Backends postgres sqlite >> > >> Experimental Code: yes >> > >> >> > >> Transpiled mdocml Manual: >> > >> >> > >> configure: For detailed setup instructions, type 'info gnunet' after >> the installation or visit >> > >> https://docs.gnunet.org/ >> > >> Installed: curl, libcurl-gnutls >> > >> Not installed: gnurl >> > >> >> > >> $ ./configure >> > >> checking build system type... x86_64-pc-linux-gnu >> > >> checking host system type... x86_64-pc-linux-gnu >> > >> checking target system type... x86_64-pc-linux-gnu >> > >> checking for a BSD-compatible install... /usr/bin/install -c >> > >> checking whether build environment is sane... yes >> > >> checking for a race-free mkdir -p... /usr/bin/mkdir -p >> > >> checking for gawk... gawk >> > >> checking whether make sets $(MAKE)... yes >> > >> checking whether make supports nested variables... yes >> > >> checking whether UID '1000' is supported by ustar format... yes >> > >> checking whether GID '1000' is supported by ustar format... yes >> > >> checking how to create a ustar tar archive... gnutar >> > >> checking whether make supports nested variables... (cached) yes >> > >> checking for gawk... (cached) gawk >> > >> checking for gcc... gcc >> > >> checking whether the C compiler works... yes >> > >> checking for C compiler default output file name... a.out >> > >> checking for suffix of executables... >> > >> checking whether we are cross compiling... no >> > >> checking for suffix of object files... o >> > >> checking whether the compiler supports GNU C... yes >> > >> checking whether gcc accepts -g... yes >> > >> checking for gcc option to enable C11 features... none needed >> > >> checking whether gcc understands -c and -o together... yes >> > >> checking whether make supports the include directive... yes (GNU >> style) >> > >> checking dependency style of gcc... gcc3 >> > >> checking whether gcc and cc understand -c and -o together... yes >> > >> checking whether ln -s works... yes >> > >> checking whether make sets $(MAKE)... (cached) yes >> > >> checking for pkg-config... /usr/bin/pkg-config >> > >> checking pkg-config is at least version 0.29.2... yes >> > >> checking how to print strings... printf >> > >> checking for a sed that does not truncate output... /usr/bin/sed >> > >> checking for grep that handles long lines and -e... /usr/bin/grep >> > >> checking for egrep... /usr/bin/grep -E >> > >> checking for fgrep... /usr/bin/grep -F >> > >> checking for ld used by gcc... /usr/bin/ld >> > >> checking if the linker (/usr/bin/ld) is GNU ld... yes >> > >> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B >> > >> checking the name lister (/usr/bin/nm -B) interface... BSD nm >> > >> checking the maximum length of command line arguments... 1572864 >> > >> checking how to convert x86_64-pc-linux-gnu file names to >> x86_64-pc-linux-gnu format... func_convert_file_noop >> > >> checking how to convert x86_64-pc-linux-gnu file names to toolchain >> format... func_convert_file_noop >> > >> checking for /usr/bin/ld option to reload object files... -r >> > >> checking for file... file >> > >> checking for objdump... objdump >> > >> checking how to recognize dependent libraries... pass_all >> > >> checking for dlltool... no >> > >> checking how to associate runtime and link libraries... printf %s\n >> > >> checking for ar... ar >> > >> checking for archiver @FILE support... @ >> > >> checking for strip... strip >> > >> checking for ranlib... ranlib >> > >> checking command to parse /usr/bin/nm -B output from gcc object... ok >> > >> checking for sysroot... no >> > >> checking for a working dd... /usr/bin/dd >> > >> checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 >> > >> checking for mt... no >> > >> checking if : is a manifest tool... no >> > >> checking for stdio.h... yes >> > >> checking for stdlib.h... yes >> > >> checking for string.h... yes >> > >> checking for inttypes.h... yes >> > >> checking for stdint.h... yes >> > >> checking for strings.h... yes >> > >> checking for sys/stat.h... yes >> > >> checking for sys/types.h... yes >> > >> checking for unistd.h... yes >> > >> checking for vfork.h... no >> > >> checking for dlfcn.h... yes >> > >> checking for objdir... .libs >> > >> checking if gcc supports -fno-rtti -fno-exceptions... no >> > >> checking for gcc option to produce PIC... -fPIC -DPIC >> > >> checking if gcc PIC flag -fPIC -DPIC works... yes >> > >> checking if gcc static flag -static works... yes >> > >> checking if gcc supports -c -o file.o... yes >> > >> checking if gcc supports -c -o file.o... (cached) yes >> > >> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports >> shared libraries... yes >> > >> checking whether -lc should be explicitly linked in... no >> > >> checking dynamic linker characteristics... GNU/Linux ld.so >> > >> checking how to hardcode library paths into programs... immediate >> > >> checking for shl_load... no >> > >> checking for shl_load in -ldld... no >> > >> checking for dlopen... yes >> > >> checking whether a program can dlopen itself... yes >> > >> checking whether a statically linked program can dlopen itself... no >> > >> checking whether stripping libraries is possible... yes >> > >> checking if libtool supports shared libraries... yes >> > >> checking whether to build shared libraries... yes >> > >> checking whether to build static libraries... no >> > >> checking for special C compiler options needed for large files... no >> > >> checking for _FILE_OFFSET_BITS value needed for large files... no >> > >> checking for _LARGEFILE_SOURCE value needed for large files... no >> > >> checking whether unaligned 64-bit access works... yes >> > >> checking if gcc supports -fno-strict-aliasing... yes >> > >> checking if gcc supports -Wno-address-of-packed-member... yes >> > >> checking if gcc supports >> -Wno-tautological-constant-out-of-range-compare... no >> > >> checking how to run the C preprocessor... gcc -E >> > >> checking for X... libraries , headers >> > >> checking for gethostbyname... yes >> > >> checking for connect... yes >> > >> checking for remove... yes >> > >> checking for shmat... yes >> > >> checking for IceConnectionNumber in -lICE... yes >> > >> checking for build target... linux >> > >> checking for library containing gethostbyname... none required >> > >> checking for library containing memchr... none required >> > >> checking for library containing memset_s... no >> > >> checking for library containing explicit_bzero... none required >> > >> checking for socket in -lsocket... no >> > >> checking for log in -lm... yes >> > >> checking for getloadavg... yes >> > >> checking for getopt... true >> > >> checking for pkgconf... /usr/bin/pkg-config >> > >> checking for ssh... true >> > >> checking for SSH key... no >> > >> checking for a Python interpreter with version >= 3.4... python >> > >> checking for python... /usr/bin/python >> > >> checking for python version... 3.10 >> > >> checking for python platform... linux >> > >> checking for GNU default python prefix... ${prefix} >> > >> checking for GNU default python exec_prefix... ${exec_prefix} >> > >> checking for python script directory (pythondir)... >> ${PYTHON_PREFIX}/lib/python3.10/site-packages >> > >> checking for python extension module directory (pyexecdir)... >> ${PYTHON_EXEC_PREFIX}/lib/python3.10/site-packages >> > >> checking for perl... /usr/bin/perl >> > >> checking for pdflatex... pdflatex >> > >> checking for the TikZ package for LaTeX... yes >> > >> checking for pdflatex... (cached) pdflatex >> > >> checking for the QR Code package for LaTeX... no >> > >> checking for pdflatex... (cached) pdflatex >> > >> checking for the Labels package for LaTeX... yes >> > >> checking for -iptables... no >> > >> checking for iptables... /usr/bin/iptables >> > >> checking for -ip6tables... no >> > >> checking for ip6tables... /usr/bin/ip6tables >> > >> checking for -ip... no >> > >> checking for ip... /usr/bin/ip >> > >> checking for -ifconfig... no >> > >> checking for ifconfig... /usr/bin/ifconfig >> > >> checking for adduser... false >> > >> checking for -sysctl... no >> > >> checking for sysctl... /usr/bin/sysctl >> > >> checking for -upnpc... no >> > >> checking for upnpc... /usr/bin/upnpc >> > >> checking for checkbashisms... no >> > >> checking for checkbashisms.pl... no >> > >> checking for uncrustify... false >> > >> checking for yapf... no >> > >> checking for struct tm.tm_gmtoff... yes >> > >> checking for getaddrinfo_a in -lanl... yes >> > >> checking for libgcrypt-config... /usr/bin/libgcrypt-config >> > >> checking for LIBGCRYPT - version >= 1.6.0... yes (1.10.1-unknown) >> > >> checking LIBGCRYPT API version... okay >> > >> checking for gcc options needed to detect all undeclared >> functions... none needed >> > >> checking whether gcry_mpi_set_opaque_copy is declared... yes >> > >> checking for if_tun.h... no >> > >> checking for linux/if_tun.h... yes >> > >> checking whether struct in6_ifreq is declared... no >> > >> checking for sphinx-build... true >> > >> checking for mandoc... no >> > >> checking for a working HMAC... yes >> > >> checking for static assertion support... yes >> > >> checking for bluetooth/bluetooth.h... yes >> > >> checking for ba2str in -lbluetooth... yes >> > >> checking for zbar.h... yes >> > >> checking for zbar_processor_create in -lzbar... yes >> > >> checking for png.h... yes >> > >> checking for png_create_read_struct in -lpng... yes >> > >> checking for pabc/pabc.h... yes >> > >> checking for pabc_new_ctx in -lpabc... no >> > >> checking for jansson.h... yes >> > >> checking for json_loads in -ljansson... yes >> > >> checking for jose/jose.h... yes >> > >> checking for jose_jwk_gen in -ljose... yes >> > >> checking for pulse/simple.h... yes >> > >> checking for pa_stream_peek in -lpulse... yes >> > >> checking for opus/opus.h... yes >> > >> checking for opus_decode_float in -lopus... yes >> > >> checking for ogg/ogg.h... yes >> > >> checking for ogg_stream_flush_fill in -logg... yes >> > >> checking for GST... yes >> > >> checking for conversation feature set to build... pulse >> > >> checking for gawk... (cached) gawk >> > >> checking for gnurl-config... no >> > >> checking whether libgnurl is usable... no >> > >> checking for gawk... (cached) gawk >> > >> checking for curl-config... /usr/bin/curl-config >> > >> checking for the version of libcurl... 7.85.0 >> > >> checking for libcurl >= version 7.34.0... yes >> > >> checking whether libcurl is usable... yes >> > >> checking for curl_free... yes >> > >> checking for library containing __atomic_load_8... -latomic >> > >> checking for nss.h... yes >> > >> checking whether NSS_STATUS_UNAVAIL is declared... yes >> > >> checking for kvm_open in -lkvm... no >> > >> checking for kstat_open in -lkstat... no >> > >> checking for sodium.h... yes >> > >> checking for crypto_core_ed25519_scalar_mul in -lsodium... yes >> > >> checking for extractor.h... yes >> > >> checking for EXTRACTOR_plugin_add_defaults in -lextractor... yes >> > >> checking for ltdl.h... yes >> > >> checking for lt_dlopenext in -lltdl... yes >> > >> checking for idn2.h... yes >> > >> checking for idn2_to_unicode_8z8z in -lidn2... yes >> > >> checking for zlib.h... yes >> > >> checking for compress2 in -lz... yes >> > >> checking for ld used by gcc... /usr/bin/ld -m elf_x86_64 >> > >> checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes >> > >> checking for shared library run path origin... done >> > >> checking for iconv... yes >> > >> checking for working iconv... yes >> > >> checking for iconv declaration... >> > >> extern size_t iconv (iconv_t cd, char * *inbuf, size_t >> *inbytesleft, char * *outbuf, size_t *outbytesleft); >> > >> checking for libunistring... yes >> > >> checking how to link with libunistring... /usr/lib/libunistring.so >> > >> checking for libunistring version... 1.0.0 >> > >> checking for sqlite3.h... yes >> > >> checking for sqlite3_open in -lsqlite3... yes >> > >> checking for pkg-config... (cached) /usr/bin/pkg-config >> > >> checking pkg-config is at least version 0.9.0... yes >> > >> checking for the PostgreSQL libraries CPPFLAGS... >> > >> checking for the PostgreSQL libraries LDFLAGS... >> > >> checking for the PostgreSQL libraries LIBS... -lpq >> > >> checking for the PostgreSQL version... 14.5 >> > >> checking for libpq-fe.h... yes >> > >> checking for the PostgreSQL library linking is working... yes >> > >> checking for libpq-fe.h... (cached) yes >> > >> checking for mysql_init in -lmysqlclient... no >> > >> checking for MHD... yes >> > >> checking for gnutls/abstract.h... yes >> > >> checking for gnutls_priority_set in -lgnutls... yes >> > >> checking for gnutls/dane.h... no >> > >> checking for dirent.h that defines DIR... yes >> > >> checking for library containing opendir... none required >> > >> checking for fcntl.h... yes >> > >> checking for math.h... yes >> > >> checking for errno.h... yes >> > >> checking for ctype.h... yes >> > >> checking for limits.h... yes >> > >> checking for stdarg.h... yes >> > >> checking for signal.h... yes >> > >> checking for locale.h... yes >> > >> checking for stdatomic.h... yes >> > >> checking for malloc.h... yes >> > >> checking for malloc/malloc.h... no >> > >> checking for malloc/malloc_np.h... no >> > >> checking for langinfo.h... yes >> > >> checking for sys/param.h... yes >> > >> checking for sys/mount.h... yes >> > >> checking for sys/statvfs.h... yes >> > >> checking for sys/select.h... yes >> > >> checking for sockLib.h... no >> > >> checking for sys/mman.h... yes >> > >> checking for sys/msg.h... yes >> > >> checking for sys/vfs.h... yes >> > >> checking for arpa/inet.h... yes >> > >> checking for libintl.h... yes >> > >> checking for netdb.h... yes >> > >> checking for netinet/in.h... yes >> > >> checking for sys/ioctl.h... yes >> > >> checking for sys/socket.h... yes >> > >> checking for sys/time.h... yes >> > >> checking for sys/sysinfo.h... yes >> > >> checking for sys/file.h... yes >> > >> checking for sys/resource.h... yes >> > >> checking for ifaddrs.h... yes >> > >> checking for mach/mach.h... no >> > >> checking for sys/timeb.h... yes >> > >> checking for argz.h... yes >> > >> checking for ucred.h... no >> > >> checking for sys/ucred.h... no >> > >> checking for endian.h... yes >> > >> checking for sys/endian.h... no >> > >> checking for execinfo.h... yes >> > >> checking for byteswap.h... yes >> > >> checking whether NLS is requested... yes >> > >> checking for msgfmt... /usr/bin/msgfmt >> > >> checking for gmsgfmt... /usr/bin/msgfmt >> > >> checking for xgettext... /usr/bin/xgettext >> > >> checking for msgmerge... /usr/bin/msgmerge >> > >> checking for CFPreferencesCopyAppValue... no >> > >> checking for CFLocaleCopyCurrent... no >> > >> checking for GNU gettext in libc... yes >> > >> checking whether to use NLS... yes >> > >> checking where the gettext function comes from... libc >> > >> checking for pid_t... yes >> > >> checking for size_t... yes >> > >> checking for mode_t... yes >> > >> checking whether stat file-mode macros are broken... no >> > >> checking for _Bool... yes >> > >> checking for stdbool.h that conforms to C99... yes >> > >> checking whether struct tm is in sys/time.h or time.h... time.h >> > >> checking for struct sockaddr_in.sin_len... no >> > >> checking for struct sockaddr_un.sun_len... no >> > >> checking for off_t... yes >> > >> checking for uid_t in sys/types.h... yes >> > >> checking for fork... yes >> > >> checking for vfork... yes >> > >> checking for working fork... yes >> > >> checking for working vfork... (cached) yes >> > >> checking for working chown... yes >> > >> checking for atoll... yes >> > >> checking for stat64... yes >> > >> checking for strnlen... yes >> > >> checking for mremap... yes >> > >> checking for getrlimit... yes >> > >> checking for setrlimit... yes >> > >> checking for sysconf... yes >> > >> checking for initgroups... yes >> > >> checking for strndup... yes >> > >> checking for gethostbyname2... yes >> > >> checking for getpeerucred... no >> > >> checking for getpeereid... no >> > >> checking for setresuid... yes >> > >> checking for getifaddrs... yes >> > >> checking for freeifaddrs... yes >> > >> checking for getresgid... yes >> > >> checking for mallinfo2... yes >> > >> checking for malloc_size... no >> > >> checking for malloc_usable_size... yes >> > >> checking for getrusage... yes >> > >> checking for random... yes >> > >> checking for srandom... yes >> > >> checking for stat... yes >> > >> checking for statfs... yes >> > >> checking for statvfs... yes >> > >> checking for wait4... yes >> > >> checking for timegm... yes >> > >> checking for sudo... sudo >> > >> checking for doas... no >> > >> checking if __thread is supported... yes >> > >> checking for git... /usr/bin/git >> > >> checking if source is under a VCS... no >> > >> checking that generated files are newer than configure... done >> > >> configure: creating ./config.status >> > >> config.status: creating Makefile >> > >> config.status: creating bin/Makefile >> > >> config.status: creating contrib/Makefile >> > >> config.status: creating contrib/hellos/Makefile >> > >> config.status: creating contrib/services/Makefile >> > >> config.status: creating contrib/services/openrc/Makefile >> > >> config.status: creating contrib/services/systemd/Makefile >> > >> config.status: creating contrib/scripts/Makefile >> > >> config.status: creating contrib/scripts/gnunet-logread/Makefile >> > >> config.status: creating doc/Makefile >> > >> config.status: creating doc/man/Makefile >> > >> config.status: creating doc/doxygen/Makefile >> > >> config.status: creating m4/Makefile >> > >> config.status: creating po/Makefile.in >> > >> config.status: creating src/Makefile >> > >> config.status: creating src/arm/Makefile >> > >> config.status: creating src/arm/arm.conf >> > >> config.status: creating src/ats/Makefile >> > >> config.status: creating src/ats/ats.conf >> > >> config.status: creating src/ats-tool/Makefile >> > >> config.status: creating src/auction/Makefile >> > >> config.status: creating src/block/Makefile >> > >> config.status: creating src/cadet/Makefile >> > >> config.status: creating src/cadet/cadet.conf >> > >> config.status: creating src/core/Makefile >> > >> config.status: creating src/core/core.conf >> > >> config.status: creating src/consensus/Makefile >> > >> config.status: creating src/consensus/consensus.conf >> > >> config.status: creating src/conversation/Makefile >> > >> config.status: creating src/conversation/conversation.conf >> > >> config.status: creating src/curl/Makefile >> > >> config.status: creating src/datacache/Makefile >> > >> config.status: creating src/datastore/Makefile >> > >> config.status: creating src/datastore/datastore.conf >> > >> config.status: creating src/dht/Makefile >> > >> config.status: creating src/dht/dht.conf >> > >> config.status: creating src/dhtu/Makefile >> > >> config.status: creating src/dns/Makefile >> > >> config.status: creating src/dns/dns.conf >> > >> config.status: creating src/exit/Makefile >> > >> config.status: creating src/fragmentation/Makefile >> > >> config.status: creating src/fs/Makefile >> > >> config.status: creating src/fs/fs.conf >> > >> config.status: creating src/gns/Makefile >> > >> config.status: creating src/gns/gns.conf >> > >> config.status: creating src/gns/nss/Makefile >> > >> config.status: creating src/gnsrecord/Makefile >> > >> config.status: creating src/hello/Makefile >> > >> config.status: creating src/identity/Makefile >> > >> config.status: creating src/identity/identity.conf >> > >> config.status: creating src/include/Makefile >> > >> config.status: creating src/integration-tests/Makefile >> > >> config.status: creating src/json/Makefile >> > >> config.status: creating src/hostlist/Makefile >> > >> config.status: creating src/my/Makefile >> > >> config.status: creating src/mysql/Makefile >> > >> config.status: creating src/namecache/Makefile >> > >> config.status: creating src/namecache/namecache.conf >> > >> config.status: creating src/namestore/Makefile >> > >> config.status: creating src/namestore/namestore.conf >> > >> config.status: creating src/nat/Makefile >> > >> config.status: creating src/nat/nat.conf >> > >> config.status: creating src/nat-auto/Makefile >> > >> config.status: creating src/nat-auto/nat-auto.conf >> > >> config.status: creating src/nse/Makefile >> > >> config.status: creating src/nse/nse.conf >> > >> config.status: creating src/nt/Makefile >> > >> config.status: creating src/peerinfo/Makefile >> > >> config.status: creating src/peerinfo/peerinfo.conf >> > >> config.status: creating src/peerinfo-tool/Makefile >> > >> config.status: creating src/peerstore/Makefile >> > >> config.status: creating src/peerstore/peerstore.conf >> > >> config.status: creating src/pq/Makefile >> > >> config.status: creating src/pt/Makefile >> > >> config.status: creating src/regex/Makefile >> > >> config.status: creating src/regex/regex.conf >> > >> config.status: creating src/revocation/Makefile >> > >> config.status: creating src/revocation/revocation.conf >> > >> config.status: creating src/rps/Makefile >> > >> config.status: creating src/rps/rps.conf >> > >> config.status: creating src/secretsharing/Makefile >> > >> config.status: creating src/secretsharing/secretsharing.conf >> > >> config.status: creating src/scalarproduct/Makefile >> > >> config.status: creating src/scalarproduct/scalarproduct.conf >> > >> config.status: creating src/set/Makefile >> > >> config.status: creating src/set/set.conf >> > >> config.status: creating src/seti/Makefile >> > >> config.status: creating src/seti/seti.conf >> > >> config.status: creating src/setu/Makefile >> > >> config.status: creating src/setu/setu.conf >> > >> config.status: creating src/sq/Makefile >> > >> config.status: creating src/statistics/Makefile >> > >> config.status: creating src/statistics/statistics.conf >> > >> config.status: creating src/template/Makefile >> > >> config.status: creating src/testbed/Makefile >> > >> config.status: creating src/testbed/testbed.conf >> > >> config.status: creating src/testbed-logger/Makefile >> > >> config.status: creating src/testbed-logger/testbed-logger.conf >> > >> config.status: creating src/testing/Makefile >> > >> config.status: creating src/topology/Makefile >> > >> config.status: creating src/transport/Makefile >> > >> config.status: creating src/transport/transport.conf >> > >> config.status: creating src/util/Makefile >> > >> config.status: creating src/util/resolver.conf >> > >> config.status: creating src/vpn/Makefile >> > >> config.status: creating src/vpn/vpn.conf >> > >> config.status: creating src/zonemaster/Makefile >> > >> config.status: creating src/zonemaster/zonemaster.conf >> > >> config.status: creating src/rest/Makefile >> > >> config.status: creating src/abd/Makefile >> > >> config.status: creating src/abd/abd.conf >> > >> config.status: creating src/reclaim/Makefile >> > >> config.status: creating src/messenger/Makefile >> > >> config.status: creating src/messenger/messenger.conf >> > >> config.status: creating pkgconfig/Makefile >> > >> config.status: creating pkgconfig/gnunetarm.pc >> > >> config.status: creating pkgconfig/gnunetats.pc >> > >> config.status: creating pkgconfig/gnunetblock.pc >> > >> config.status: creating pkgconfig/gnunetcadet.pc >> > >> config.status: creating pkgconfig/gnunetconsensus.pc >> > >> config.status: creating pkgconfig/gnunetconversation.pc >> > >> config.status: creating pkgconfig/gnunetcore.pc >> > >> config.status: creating pkgconfig/gnunetdatacache.pc >> > >> config.status: creating pkgconfig/gnunetdatastore.pc >> > >> config.status: creating pkgconfig/gnunetdht.pc >> > >> config.status: creating pkgconfig/gnunetdns.pc >> > >> config.status: creating pkgconfig/gnunetenv.pc >> > >> config.status: creating pkgconfig/gnunetfragmentation.pc >> > >> config.status: creating pkgconfig/gnunetfs.pc >> > >> config.status: creating pkgconfig/gnunetgns.pc >> > >> config.status: creating pkgconfig/gnunethello.pc >> > >> config.status: creating pkgconfig/gnunetidentity.pc >> > >> config.status: creating pkgconfig/gnunetmicrophone.pc >> > >> config.status: creating pkgconfig/gnunetmysql.pc >> > >> config.status: creating pkgconfig/gnunetnamestore.pc >> > >> config.status: creating pkgconfig/gnunetnat.pc >> > >> config.status: creating pkgconfig/gnunetnse.pc >> > >> config.status: creating pkgconfig/gnunetpeerinfo.pc >> > >> config.status: creating pkgconfig/gnunetpq.pc >> > >> config.status: creating pkgconfig/gnunetregex.pc >> > >> config.status: creating pkgconfig/gnunetrevocation.pc >> > >> config.status: creating pkgconfig/gnunetrps.pc >> > >> config.status: creating pkgconfig/gnunetscalarproduct.pc >> > >> config.status: creating pkgconfig/gnunetset.pc >> > >> config.status: creating pkgconfig/gnunetspeaker.pc >> > >> config.status: creating pkgconfig/gnunetstatistics.pc >> > >> config.status: creating pkgconfig/gnunettestbed.pc >> > >> config.status: creating pkgconfig/gnunettesting.pc >> > >> config.status: creating pkgconfig/gnunettransport.pc >> > >> config.status: creating pkgconfig/gnunetutil.pc >> > >> config.status: creating pkgconfig/gnunetvpn.pc >> > >> config.status: creating gnunet_config.h >> > >> config.status: executing depfiles commands >> > >> config.status: executing libtool commands >> > >> config.status: executing po-directories commands >> > >> config.status: creating po/POTFILES >> > >> config.status: creating po/Makefile >> > >> configure: WARNING: GnuTLS lacks DANE support; validation using it >> will not be possible >> > >> configure: WARNING: Your version of Python is not supported, you >> might see issues >> > >> configure: >> > >> Detected system >> > >> =============== >> > >> >> > >> GNUnet version: 0.17.5 >> > >> >> > >> Host Setup: x86_64-pc-linux-gnu >> > >> Install Prefix: /usr >> > >> Compiler: gcc >> > >> CFLAGS: -march=x86-64 -mtune=generic -O2 >> -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat >> -Werror=format-security -fstack-clash-protection -fcf-protection >> -fno-strict-aliasing -Wno-address-of-packed-member >> > >> CPPFLAGS: >> > >> LDFLAGS: >> -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now >> -Wl,--unresolved-symbols=report-all >> > >> LIBS: -lm >> > >> Build Target: linux >> > >> >> > >> Default Interface: eth0 >> > >> >> > >> sqlite3: yes >> > >> MySQL: no >> > >> PostgreSQL: yes >> > >> >> > >> HTTP Client: curl-openssl >> > >> Bluetooth: yes >> > >> iptables: yes >> > >> ifconfig: yes >> > >> UPnPc: yes >> > >> GnuTLS: yes (without DANE support) >> > >> >> > >> LaTeX: yes >> > >> >> > >> libextractor: yes >> > >> libzbar: yes >> > >> libpng: yes >> > >> libidn: libidn2 >> > >> libopus: yes >> > >> libpulse: yes >> > >> gstreamer: no >> > >> >> > >> Java: no >> > >> >> > >> sphinx: yes >> > >> mandoc: no >> > >> >> > >> GNUnet configuration >> > >> ==================== >> > >> >> > >> Transports: tcp udp unix http wlan >> > >> Conversation: yes (pulse) >> > >> Database Backends postgres sqlite >> > >> Experimental Code: yes >> > >> >> > >> Transpiled mdocml Manual: >> > >> >> > >> configure: For detailed setup instructions, type 'info gnunet' after >> the installation or visit >> > >> https://docs.gnunet.org/ >> > >> >> > >> On Mon, Sep 5, 2022 at 7:14 PM Christian Grothoff < >> groth...@gnunet.org> wrote: >> > >> Did you happen to have both libcurl-gnutls and libcurl-openssl >> > >> installed, and maybe configure found the wrong one? >> > >> >> > >> On 9/5/22 18:56, madmurphy wrote: >> > >>> Mmm I just checked better, and the |configure| script now says: >> > >>> >> > >>> ... >> > >>> HTTP Client: curl-openssl >> > >>> ... >> > >>> >> > >>> That is not a good sign, right? >> > >>> >> > >>> >> > >>> On Mon, Sep 5, 2022 at 5:47 PM madmurphy <madmurphy...@gmail.com >> > >>> <mailto:madmurphy...@gmail.com>> wrote: >> > >>> >> > >>> Indeed, there is a dedicated package on Arch, |libcurl-gnutls| >> > >>> <https://archlinux.org/packages/core/x86_64/libcurl-gnutls/>. I >> just >> > >>> checked, and it seems that GNUnet works fine with it. Package >> > >>> updated >> > >>> < >> https://aur.archlinux.org/cgit/aur.git/commit/?h=gnunet&id=3693252e6dcdf53bfa428b4c078729c08f68ecde >> >. >> > >>> >> > >>> --madmurphy >> > >>> >> > >>> >> > >>> On Mon, Sep 5, 2022 at 4:25 PM Christian Grothoff >> > >>> <groth...@gnunet.org <mailto:groth...@gnunet.org>> wrote: >> > >>> >> > >>> If Arch has a curl linked against GnuTLS, then yes. >> -Christian >> > >>> >> > >>> On 9/5/22 17:11, madmurphy wrote: >> > >>>> On Arch GNUnet still depends on GNUrl, but as far as I >> > >>> understood now >> > >>>> cURL is preferred. Would I do the right thing if updated the Arch >> > >>>> package accordingly and dropped the GNUrl dependency for good? >> > >>>> >> > >>>> --madmurphy >> > >>> >> > >> >> > > >> > >> >>