Le dimanche 01 mai 2022 à 06:13 +0200, newbie nullzwei via gnumeric- list a écrit : > > I've been trying to get gnumeric 'long' out of the 'experimental' > state for some time now, > and have come quite far. To make this round I still need help with > some peripheral points, > see the result of my configuration log attached at the bottom of this > post. > > TIA for any help!! > > - Introspection - I don't know this and can't handle it, with > 'double' builds all 5 tests t-300x hold, > with long t3000, t3001 and t3004 fail, logs also copied below. I need > tips on what this can be, > or how introspection is normally / manually used and how I can narrow > down the fails.
GObject Introspection does not support long double as far as I know, so you most probably need to choose between introspection and long double. > - GDA support - libgda is criticized already by 'double' builds in > the configuration - see attached - as 'libgda problem', > I tried to install it with apt-get: > └─# apt-get install libgda-5.0-dev > -> libgda-5.0-dev is already the newest version (5.2.10-2). > └─# apt-get install libgda-6.0-dev > -> E: Unable to locate package libgda-6.0-dev > and manually acc. 'linuxfromscratch', two issues: > -- gnumeric requires version 6.0 ( shows up somewhere in the logs ), > this is only supported > by a few distributions, see > <https://gitlab.gnome.org/GNOME/libgda/-/issues/256> and > <https://repology.org/project/libgda/versions>. > -- manual installation and build fail because the README says: > 'Please note that if you use the Git > repository the INSTALL file doesn't exist before you run the > autogen.sh script. alas I can't find an > autogen.sh in the repo ... :-( Who has a working installation or > can give hints how I could get to one. libgda uses meson, read https://mesonbuild.com/Running-Meson.html if you don't know how to make it run. Be certain to build wit ui support otherwise libgda-ui will not be built. Note that the debian package misses it. > - GNOME-DB support - is about the same? if not please tell me what I > have to do to activate it. This is obsolete and should be removed > - Psiconv support - what is it and what do I need to do to get rid of > 'missing dependencies'? This is for Psion file format support. Not sure it is still very useful. You need to install it from sources, apparently not provided by Debian. > - PDF documentattion - how do I 'request' this, DBLatex had some > installation difficulties. > > my OS: Kali Linux 2021-4, debian based, > > -------- result of './configure --with-long-double --enable- > introspection=yes' -------- > Configuration: > Source code location: . > Compiler: gcc > Compiler flags: -g -O2 - > DGDK_DISABLE_DEPRECATION_WARNINGS -DGTK_DISABLE_DEPRECATION_WARNINGS > -Wall -Werror=init-self -Werror=missing-include-dirs -Wsign-compare - > Werror=pointer-arith -Wchar-subscripts -Wwrite-strings -Wdeclaration- > after-statement -Wnested-externs -Wmissing-noreturn -Werror=missing- > prototypes -Werror=nested-externs -Werror=implicit-function- > declaration -Wmissing-declarations -Wno-pointer-sign -Werror=format- > security -Wstrict-prototypes -Wno-error=format-nonliteral > Floating point type: long double (EXPERIMENTAL) > UI: Gtk > Perl plugin support: yes (using perl) > Python plugin support: yes (using /usr/bin/python3) > Introspection python support: Yes. > GDA support: NO. libgda problem > GNOME-DB support: no > Psiconv support: Missing dependencies > PDF documentation: No, not requested. > > -------- result of test t3000-introspection-basic.pl -------- > FAIL: t3000-introspection-basic.pl > ================================== > > | Traceback (most recent call last): > | File "/home/kali/gnome.lnk/straight/gnumeric_long/test/t3000- > introspection-basic.py", line 11, in <module> > | print(Gnm.qnorm(0.4,0,1,1,0)) > | File "/usr/lib/python3/dist-packages/gi/overrides/__init__.py", > line 32, in __getattr__ > | return getattr(self._introspection_module, name) > | File "/usr/lib/python3/dist-packages/gi/module.py", line 123, in > __getattr__ > | raise AttributeError("%r object has no attribute %r" % ( > | AttributeError: 'gi.repository.Gnm' object has no attribute > 'qnorm' > Failed command: /usr/bin/python3 > /home/kali/gnome.lnk/straight/gnumeric_long/test/t3000-introspection- > basic.py > FAIL t3000-introspection-basic.pl (exit status: 1) > > -------- result of test t3001-introspection-simple.pl -------- > FAIL: t3001-introspection-simple.pl > =================================== > > | Name: Sheet1 > | Number of columns: 256 > | Number of rows: 65536 > | Traceback (most recent call last): > | File "/home/kali/gnome.lnk/straight/gnumeric_long/test/t3001- > introspection-simple.py", line 31, in <module> > | sheet.cell_set_value(0,1,Gnm.Value.new_float(101.25)) > | AttributeError: type object 'Value' has no attribute 'new_float' > Failed command: /usr/bin/python3 > /home/kali/gnome.lnk/straight/gnumeric_long/test/t3001-introspection- > simple.py > FAIL t3001-introspection-simple.pl (exit status: > 1) > > > > -------- result of test t3004-introspection-overrides.pl -------- > FAIL: t3004-introspection-overrides.pl > ====================================== > > | Using in-tree gi.overrides.Gnm > | > | Testing GnmValue overrides: > | {EMPTY,None} > | {BOOLEAN,0} > | {BOOLEAN,1} > | {FLOAT,12} > | Traceback (most recent call last): > | File "/home/kali/gnome.lnk/straight/gnumeric_long/test/t3004- > introspection-overrides.py", line 26, in <module> > | print(Gnm.Value.new_float(12.5)) > | AttributeError: type object 'Value' has no attribute 'new_float' > Failed command: /usr/bin/python3 > /home/kali/gnome.lnk/straight/gnumeric_long/test/t3004-introspection- > overrides.py > FAIL t3004-introspection-overrides.pl (exit status: 1) > _______________________________________________ > gnumeric-list mailing list > gnumeric-list@gnome.org > https://mail.gnome.org/mailman/listinfo/gnumeric-list _______________________________________________ gnumeric-list mailing list gnumeric-list@gnome.org https://mail.gnome.org/mailman/listinfo/gnumeric-list
