Thank you Kalpesh, that worked. Can't imagine why it failed the first time... Now I get the same error as in Linux, the one on the attached image. New investigation.
Thank you all for your time and help. ----- Regards, Pedro Albuquerque Em 07/10/2026 às 22:46, "Kalpesh Patel" <[email protected]> escreveu: >You shouldn't need to install Strawberry Perl separately if you are using the 'Install Online Price Retrieval for GnuCash' script available on Windows with the installation of GnuCash. Just type it in the Start menu --> Search > >This is what I would suggest: >1 - Uninstall Strawberry Perl from the Control Panel --> Programs and Features (if you don’t find it then no problem) >2 - Delete c:\Straberry directory including the base directory itself. >3 - Reboot the computer >4 - Install GnuCash as usual with a regular user (this goes for all here -- run as a regular user and not as an admin) >5 - Reboot the computer >6 - Run 'Install Online Price Retrieval for GnuCash' as a regular user >7 - Verify the installation (this should return: C:\Strawberry\perl\bin\perl.exe). Open up command prompt and type following at the prompt: where perl >8 - Verify F::Q installation (this should return: #.##). In the same command prompt as step 5. execute following: perl -MFinance::Quote -e "print $Finance::Quote::VERSION" > > > >As a side note which is *NOT* necessary for above steps: 'conf init pushy_https' is a CPAN configuration command and needs to be run inside CPAN shell by invoking it as follows: perl -MCPAN -e shell > >Running CPANM module is a bit simpler like this as it can be directly executed at the command prompt: cpanm install Finance::Quote > >HTH. > >-----Original Message----- >From: Murugan Mariappan <[email protected]> >Sent: Wednesday, October 07, 2026 6:17 AM >To: Pedro Albuquerque <[email protected]> >Cc: [email protected] >Subject: Re: [GNC] Problem with Finance::Quote > > > > >Hi Pedro, so Strawberry is not installed. Please download https://strawberryperl.com/ and install Strawberry first. Then go for install price quote > >Saludos Cordiales > > >Murugan > >________________________________ >From: Pedro Albuquerque <[email protected]> >Sent: 07 October 2026 11:13 >To: Murugan Mariappan <[email protected]> >Cc: [email protected] <[email protected]> >Subject: Re[2]: [GNC] Problem with Finance::Quote > >Hello Murugan, > >I have 'C:\Strawberry\perl\site\lib\', but it is empty. 'C:\Strawberry\perl\site\bin\' is also empty. > >----- >Regards, >Pedro Albuquerque >Join StarLink<https://starlink.com?referral=RC-DF-11719992-38576-14> > >Em 07/10/2026 às 11:10, Murugan Mariappan <[email protected]<mailto:[email protected]>> escreveu: > > > >Hi Pedro > >Can you check C:\Strawberry\perl\site\lib\Finance and confirm Quote folder is appearing. After you install online price retrieval. If you see the folders, then restart GNU Cash and fetch the prices > > >Saludos Cordiales > > >Murugan > >________________________________ >From: gnucash-user <[email protected]> on behalf of Pedro Albuquerque via gnucash-user <[email protected]> >Sent: 07 October 2026 10:59 >To: Wm Tarr <[email protected]> >Cc: [email protected] <[email protected]> >Subject: Re: [GNC] Problem with Finance::Quote > >Thank you for your time, I'll google for some more ideas. > >----- >Regards, >Pedro Albuquerque >[Join StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) > >Em 07/10/2026 às 10:46, Wm Tarr <[email protected]> escreveu: > >> I've run it here just to check and it has worked so I'm out of ideas, sorry. >> >> Wm >> >> On 2026-10-07 10:08, Pedro Albuquerque wrote: >> >>> Done, result below: >>> >>> >>> ----- >>> Regards, >>> Pedro Albuquerque >>> [Join >>> StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >>> Em 07/10/2026 às 10:00, "Wm Tarr" <[email protected]> escreveu: >>>>If you don't use strawberry for anything else try deleting >>>> >>>>C:\Strawberry >>>> >>>>and running "Install online price retrieval" again >>>> >>>>Wm >>>> >>>>On 2026-10-07 09:48, Pedro Albuquerque via gnucash-user wrote: >>>>> Hello, >>>>> >>>>> I'm trying to install Finance::Quote under Windows 10 Home 22H2. >>>>> >>>>> Using the included 'Install Online Price Retrieval...' as administrator didn't work, so I tried running 'perl gnc-fq-update'. also as administrator. I got a bunch of errors, output of the command is below. I tried running that 'o conf...' but it isn't recognized. >>>>> >>>>> Can someone please tell me what am I doing wrong here? Thank you in advance. >>>>> >>>>> [Perl] This is perl 5, version 38, subversion 2 (v5.38.2) built for >>>>> MSWin32-x86-multi-thread-64int >>>>> >>>>> [gnc-fq-update] >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> Database was generated on Wed, 07 Oct 2026 06:07:17 GMT >>>>> >>>>> Starting with version 2.29 of the cpan shell, a new download >>>>> mechanism is the default which exclusively uses cpan.org as the >>>>> host to download from. The configuration variable pushy_https can >>>>> be used to (de)select the new mechanism. Please read more about it >>>>> and make your choice between the old and the new mechanism by >>>>> running >>>>> >>>>> o conf init pushy_https >>>>> >>>>> Once you have done that and stored the config variable this dialog >>>>> will disappear. >>>>> Test2 is up to date (1.302225). >>>>> Running install for module 'Finance::Quote' >>>>> Checksum for >>>>> C:\STRAWB~1\cpan\sources\authors\id\B\BP\BPSCHUCK\Finance-Quote-1.7 >>>>> 1.tar.gz ok Configuring B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz with Makefile.PL Checking if your kit is complete... >>>>> Looks good >>>>> Generating a gmake-style Makefile >>>>> Writing Makefile for Finance::Quote Writing MYMETA.yml and >>>>> MYMETA.json BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK Running make for >>>>> B/BP/BPSCHUCK/Finance-Quote-1.71.tar.gz >>>>> ---- Unsatisfied dependencies detected during ---- >>>>> ---- BPSCHUCK/Finance-Quote-1.71.tar.gz ---- >>>>> Module::CPANTS::Analyse [build_requires] Readonly [requires] >>>>> Smart::Comments [requires] String::Util [requires] Test::Kwalitee >>>>> [build_requires] Test::Perl::Critic [build_requires] Web::Scraper >>>>> [requires] YAML::PP::Perl [requires] Running install for module >>>>> 'Module::CPANTS::Analyse' >>>>> Checksum for >>>>> C:\STRAWB~1\cpan\sources\authors\id\I\IS\ISHIGAKI\Module-CPANTS-Ana >>>>> lyse-1.03.tar.gz ok Configuring I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz with Makefile.PL Checking if your kit is complete... >>>>> Looks good >>>>> Generating a gmake-style Makefile >>>>> Writing Makefile for Module::CPANTS::Analyse Writing MYMETA.yml and >>>>> MYMETA.json ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> C:\Strawberry\perl\bin\perl.exe Makefile.PL -- OK Running make for >>>>> I/IS/ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> cp lib/Module/CPANTS/Kwalitee/Distros.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Distros.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Manifest.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Manifest.pm >>>>> cp lib/Module/CPANTS/Kwalitee/FindModules.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\FindModules.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Repackageable.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Repackageable.pm >>>>> cp lib/Module/CPANTS/Kwalitee/CpantsErrors.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\CpantsErrors.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Pod.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Pod.pm >>>>> cp lib/Module/CPANTS/Kwalitee.pm blib\lib\Module\CPANTS\Kwalitee.pm >>>>> cp lib/Module/CPANTS/Kwalitee/NeedsCompiler.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\NeedsCompiler.pm >>>>> cp lib/Module/CPANTS/Analyse.pm blib\lib\Module\CPANTS\Analyse.pm >>>>> cp lib/Module/CPANTS/Kwalitee/BrokenInstaller.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\BrokenInstaller.pm >>>>> cp lib/Module/CPANTS/Kwalitee/MetaYML.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\MetaYML.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Distname.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Distname.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Files.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Files.pm >>>>> cp lib/Module/CPANTS/Kwalitee/License.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\License.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Prereq.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Prereq.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Version.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Version.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Uses.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Uses.pm >>>>> cp lib/Module/CPANTS/Kwalitee/Signature.pm >>>>> blib\lib\Module\CPANTS\Kwalitee\Signature.pm >>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> C:\STRAWB~1\c\bin\gmake.exe -- OK >>>>> Running make test for ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> "C:\Strawberry\perl\bin\perl.exe" "-MExtUtils::Command::MM" >>>>> "-MTest::Harness" "-e" "undef *Test::Harness::Switches; >>>>> test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/*/*.t t/00_load.t >>>>> .............. ok t/05_testdir.t ........... ok t/05_testfile.t >>>>> .......... ok t/analyse/manifest.t ..... >>>>> Dubious, test returned 1 (wstat 256, 0x100) Failed 1/14 subtests >>>>> t/analyse/pod.t .......... ok t/analyse/uses.t ......... ok >>>>> t/older_test_kwalitee.t .. ok t/x_cpants.t ............. ok >>>>> >>>>> Test Summary Report >>>>> ------------------- >>>>> t/analyse/manifest.t (Wstat: 256 (exited 1) Tests: 14 Failed: 1) >>>>> Failed test: 13 Non-zero exit status: 1 Files=8, Tests=54, 8 >>>>> wallclock secs ( 0.05 usr + 0.12 sys = 0.17 CPU) >>>>> Result: FAIL >>>>> ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> C:\STRAWB~1\c\bin\gmake.exe test -- NOT OK //hint// to see the >>>>> cpan-testers results for installing this module, try: >>>>> reports ISHIGAKI/Module-CPANTS-Analyse-1.03.tar.gz >>>>> Stopping: 'install' failed for 'Module::CPANTS::Analyse'. >>>>> JSON::Parse is up to date (0.62). >>>>> >>>>> ----- >>>>> Regards, >>>>> Pedro Albuquerque >>>>> [Join >>>>> StarLink](https://starlink.com?referral=RC-DF-11719992-38576-14) >>>>> >>>>> _______________________________________________ >>>>> gnucash-user mailing list >>>>> [email protected] >>>>> To update your subscription preferences or to unsubscribe: >>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>> ----- >>>>> Please remember to CC this list on all your replies. >>>>> You can do this by using Reply-To-List or Reply-All. >>>>_______________________________________________ >>>>gnucash-user mailing list >>>>[email protected] >>>>To update your subscription preferences or to unsubscribe: >>>>https://lists.gnucash.org/mailman/listinfo/gnucash-user >>>>----- >>>>Please remember to CC this list on all your replies. >>>>You can do this by using Reply-To-List or Reply-All.
_______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
