Denton Liu <liu.den...@gmail.com> writes: > The output for commands used to be suppressed by redirecting both stdout > and stderr to /dev/null. However, this should not happen since the > output is useful for debugging and, without the "-v" flag, test scripts > don't output anyway. > > Unsuppress the output by removing the redirections to /dev/null.
Thanks for clearly justifying the clean-up. I take it that with this there is no behaviour changes (e.g. a command that may change its behaviour depending on where its standard output goes does not change the outcome of the tests)? I am not worried about the invocations of "git mergetool" downstream of the pipe that is fed by "yes", and the remainder are a handful of "git merge" invocations, which looked OK to me. Thanks. > Signed-off-by: Denton Liu <liu.den...@gmail.com> > --- > t/t7610-mergetool.sh | 122 +++++++++++++++++++++---------------------- > 1 file changed, 61 insertions(+), 61 deletions(-) > > diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh > index a9fb971615..69711487dd 100755 > --- a/t/t7610-mergetool.sh > +++ b/t/t7610-mergetool.sh > @@ -130,14 +130,14 @@ test_expect_success 'custom mergetool' ' > test_when_finished "git reset --hard" && > git checkout -b test$test_count branch1 && > git submodule update -N && > - test_must_fail git merge master >/dev/null 2>&1 && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > + test_must_fail git merge master && > + ( yes "" | git mergetool both ) && > ( yes "" | git mergetool file1 file1 ) && > - ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) && > - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && > - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file2 "spaced name" ) && > + ( yes "" | git mergetool subdir/file3 ) && > + ( yes "d" | git mergetool file11 ) && > + ( yes "d" | git mergetool file12 ) && > + ( yes "l" | git mergetool submod ) && > test "$(cat file1)" = "master updated" && > test "$(cat file2)" = "master new" && > test "$(cat subdir/file3)" = "master new sub" && > @@ -153,15 +153,15 @@ test_expect_success 'mergetool crlf' ' > # test_when_finished is LIFO.) > test_config core.autocrlf true && > git checkout -b test$test_count branch1 && > - test_must_fail git merge master >/dev/null 2>&1 && > - ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && > - ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && > - ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && > - ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && > + test_must_fail git merge master && > + ( yes "" | git mergetool file1 ) && > + ( yes "" | git mergetool file2 ) && > + ( yes "" | git mergetool "spaced name" ) && > + ( yes "" | git mergetool both ) && > + ( yes "" | git mergetool subdir/file3 ) && > + ( yes "d" | git mergetool file11 ) && > + ( yes "d" | git mergetool file12 ) && > + ( yes "r" | git mergetool submod ) && > test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && > test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && > test "$(printf x | cat subdir/file3 -)" = "$(printf "master new > sub\r\nx")" && > @@ -176,8 +176,8 @@ test_expect_success 'mergetool in subdir' ' > git submodule update -N && > ( > cd subdir && > - test_must_fail git merge master >/dev/null 2>&1 && > - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && > + test_must_fail git merge master && > + ( yes "" | git mergetool file3 ) && > test "$(cat file3)" = "master new sub" > ) > ' > @@ -188,14 +188,14 @@ test_expect_success 'mergetool on file in parent dir' ' > git submodule update -N && > ( > cd subdir && > - test_must_fail git merge master >/dev/null 2>&1 && > - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && > - ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && > - ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null > 2>&1 ) && > - ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && > - ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && > + test_must_fail git merge master && > + ( yes "" | git mergetool file3 ) && > + ( yes "" | git mergetool ../file1 ) && > + ( yes "" | git mergetool ../file2 ../spaced\ name ) && > + ( yes "" | git mergetool ../both ) && > + ( yes "d" | git mergetool ../file11 ) && > + ( yes "d" | git mergetool ../file12 ) && > + ( yes "l" | git mergetool ../submod ) && > test "$(cat ../file1)" = "master updated" && > test "$(cat ../file2)" = "master new" && > test "$(cat ../submod/bar)" = "branch1 submodule" && > @@ -209,9 +209,9 @@ test_expect_success 'mergetool skips autoresolved' ' > git submodule update -N && > test_must_fail git merge master && > test -n "$(git ls-files -u)" && > - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && > - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && > + ( yes "d" | git mergetool file11 ) && > + ( yes "d" | git mergetool file12 ) && > + ( yes "l" | git mergetool submod ) && > output="$(git mergetool --no-prompt)" && > test "$output" = "No files need merging" > ' > @@ -259,9 +259,9 @@ test_expect_success 'mergetool skips resolved paths when > rerere is active' ' > rm -rf .git/rr-cache && > git checkout -b test$test_count branch1 && > git submodule update -N && > - test_must_fail git merge master >/dev/null 2>&1 && > - ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && > - ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && > + test_must_fail git merge master && > + ( yes "l" | git mergetool --no-prompt submod ) && > + ( yes "d" "d" | git mergetool --no-prompt ) && > git submodule update -N && > output="$(yes "n" | git mergetool --no-prompt)" && > test "$output" = "No files need merging" > @@ -369,9 +369,9 @@ test_expect_success 'deleted vs modified submodule' ' > git checkout -b test$test_count.a test$test_count && > test_must_fail git merge master && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "r" | git mergetool submod ) && > rmdir submod && mv submod-movedaside submod && > test "$(cat submod/bar)" = "branch1 submodule" && > @@ -386,9 +386,9 @@ test_expect_success 'deleted vs modified submodule' ' > git submodule update -N && > test_must_fail git merge master && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "l" | git mergetool submod ) && > test ! -e submod && > output="$(git mergetool --no-prompt)" && > @@ -400,9 +400,9 @@ test_expect_success 'deleted vs modified submodule' ' > git submodule update -N && > test_must_fail git merge test$test_count && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "r" | git mergetool submod ) && > test ! -e submod && > test -d submod.orig && > @@ -416,9 +416,9 @@ test_expect_success 'deleted vs modified submodule' ' > git submodule update -N && > test_must_fail git merge test$test_count && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "l" | git mergetool submod ) && > test "$(cat submod/bar)" = "master submodule" && > git submodule update -N && > @@ -440,9 +440,9 @@ test_expect_success 'file vs modified submodule' ' > git checkout -b test$test_count.a branch1 && > test_must_fail git merge master && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "r" | git mergetool submod ) && > rmdir submod && mv submod-movedaside submod && > test "$(cat submod/bar)" = "branch1 submodule" && > @@ -456,9 +456,9 @@ test_expect_success 'file vs modified submodule' ' > git checkout -b test$test_count.b test$test_count && > test_must_fail git merge master && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "l" | git mergetool submod ) && > git submodule update -N && > test "$(cat submod)" = "not a submodule" && > @@ -472,9 +472,9 @@ test_expect_success 'file vs modified submodule' ' > git submodule update -N && > test_must_fail git merge test$test_count && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both >/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "r" | git mergetool submod ) && > test -d submod.orig && > git submodule update -N && > @@ -488,9 +488,9 @@ test_expect_success 'file vs modified submodule' ' > git submodule update -N && > test_must_fail git merge test$test_count && > test -n "$(git ls-files -u)" && > - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 > >/dev/null 2>&1 ) && > - ( yes "" | git mergetool both>/dev/null 2>&1 ) && > - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && > + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 ) && > + ( yes "" | git mergetool both ) && > + ( yes "d" | git mergetool file11 file12 ) && > ( yes "l" | git mergetool submod ) && > test "$(cat submod/bar)" = "master submodule" && > git submodule update -N && > @@ -543,7 +543,7 @@ test_expect_success 'submodule in subdirectory' ' > git add subdir/subdir_module && > git commit -m "change submodule in subdirectory on test$test_count.b" && > > - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && > + test_must_fail git merge test$test_count.a && > ( > cd subdir && > ( yes "l" | git mergetool subdir_module ) > @@ -554,7 +554,7 @@ test_expect_success 'submodule in subdirectory' ' > git reset --hard && > git submodule update -N && > > - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && > + test_must_fail git merge test$test_count.a && > ( yes "r" | git mergetool subdir/subdir_module ) && > test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && > git submodule update -N && > @@ -641,7 +641,7 @@ test_expect_success 'filenames seen by tools start with > ./' ' > test_config mergetool.myecho.trustExitCode true && > test_must_fail git merge master && > git mergetool --no-prompt --tool myecho -- both >actual && > - grep ^\./both_LOCAL_ actual >/dev/null > + grep ^\./both_LOCAL_ actual > ' > > test_lazy_prereq MKTEMP ' > @@ -658,8 +658,8 @@ test_expect_success MKTEMP 'temporary filenames are used > with mergetool.writeToT > test_config mergetool.myecho.trustExitCode true && > test_must_fail git merge master && > git mergetool --no-prompt --tool myecho -- both >actual && > - ! grep ^\./both_LOCAL_ actual >/dev/null && > - grep /both_LOCAL_ actual >/dev/null > + ! grep ^\./both_LOCAL_ actual && > + grep /both_LOCAL_ actual > ' > > test_expect_success 'diff.orderFile configuration is honored' '
