On Thu, 17 Nov 2005, Richard Fish wrote: > Hmm, looks ok. Could you set udev_log=7 in /etc/udev/udev.conf, and > post the entries that are added to /var/log/messages when you turn on > the hard drive. > $ tail -F /var/log/kernel/current Nov 17 17:41:51 [kernel] usb-storage: -- transfer complete Nov 17 17:41:51 [kernel] usb-storage: Bulk command transfer result=0 Nov 17 17:41:51 [kernel] usb-storage: Attempting to get CSW... Nov 17 17:41:51 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Nov 17 17:41:51 [kernel] usb-storage: Status code 0; transferred 13/13 Nov 17 17:41:51 [kernel] usb-storage: -- transfer complete Nov 17 17:41:51 [kernel] usb-storage: Bulk status result = 0 Nov 17 17:41:51 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x78 R 0 Stat 0x0 Nov 17 17:41:51 [kernel] usb-storage: scsi cmd done, result=0x0 Nov 17 17:41:51 [kernel] usb-storage: *** thread sleeping. Nov 17 18:21:25 [kernel] usb 1-3: new high speed USB device using ehci_hcd and address 20 Nov 17 18:21:25 [kernel] usb 1-3: device descriptor read/all, error -71 Nov 17 18:21:25 [kernel] usb 1-3: new high speed USB device using ehci_hcd and address 21 Nov 17 18:21:25 [kernel] usb 1-3: string descriptor 0 read error: -71 - Last output repeated 2 times - Nov 17 18:21:25 [kernel] usb 1-3: new high speed USB device using ehci_hcd and address 22 Nov 17 18:21:25 [kernel] usb 1-3: string descriptor 0 read error: -71 - Last output repeated 2 times - Nov 17 18:21:25 [kernel] usb 1-3: new high speed USB device using ehci_hcd and address 23 Nov 17 18:21:25 [kernel] usb 1-3: string descriptor 0 read error: -71
(Using metalog...) Jorge -- gentoo-user@gentoo.org mailing list
