чт, 18 февр. 2021 г. в 01:10, Michael <confabul...@kintzios.com>: > > On Wednesday, 17 February 2021 21:45:35 GMT gevisz wrote: > > > Most probably, both my SATA disks have connection problems as > > Oli Schmidt suggested from the very beginning, and because they > > both have it, it points to the motherboard that already had quite > > a bad track record. > > > > Unfortunately, I cannot diagnose it further, but later will try > > to experiment with attaching my SATA drives again. > > It may be worth mentioning I've experienced similar problems with an old MoBo, > different to yours. Eventually I narrowed it down to a loose SATA connector > on the MoBo. It would either fail completely to boot, or it would boot but > the disk would make a clicking noise. I initially suspected a dying disk, but > after I reseated the cable on the MoBo the problem went away, for a while, > until I reseated it once more. :-) > > The ATA disk would boot normally (IDE controller). > > Anyway, just make sure you have enable AHCI instead of IDE type controller on > your BIOS menu for the SATA disk and have configured the Gentoo kernel > appropriately to include AHCI.
I will look into this and report if I will find something. Thank you.
