OK. I jumped into LVM. I took my spare drive, put it to use with LVM. Then copied data from my super large drive to it and backed up some to DVDs that wouldn't fit. Then I put the big drive on LVM and put the stuff back. Now comes the problem. I use LABELS in fstab and would like to continue that. I can't figure out how to get the LABEL set for the LVM file system tho. This is my info:

root@fireball / # pvdisplay
  --- Physical volume ---
  PV Name               /dev/sdb1
  VG Name               data
  PV Size               232.83 GiB / not usable 2.55 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              59604
  Free PE               0
  Allocated PE          59604
  PV UUID               Nxvrjn-BuaK-RGsF-F32S-0EaI-W4xe-H6Lnjl

  --- Physical volume ---
  PV Name               /dev/sdc1
  VG Name               data
  PV Size               698.64 GiB / not usable 4.84 MiB
  Allocatable           yes
  PE Size               4.00 MiB
  Total PE              178850
  Free PE               118
  Allocated PE          178732
  PV UUID               NF6I4G-L1L5-0VDE-HyUc-ESH3-CfV3-eUo676

root@fireball / # vgdisplay
  --- Volume group ---
  VG Name               data
  System ID
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               931.46 GiB
  PE Size               4.00 MiB
  Total PE              238454
  Alloc PE / Size       238336 / 931.00 GiB
  Free  PE / Size       118 / 472.00 MiB
  VG UUID               eNF7B0-3BDb-qe1W-5FTH-4Uah-wRe1-xD7Xa8

root@fireball / # lvdisplay
  --- Logical volume ---
  LV Name                /dev/data/data1
  VG Name                data
  LV UUID                ZvsgH6-PI0M-NqVd-op9P-Crsy-IEnz-iKoTfp
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                931.00 GiB
  Current LE             238336
  Segments               2
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           254:0

root@fireball / #


I tried e2label since it has ext4 for the file system. It didn't work and I don't know for sure what to point it to for the device. I can't point to the drive itself since there are now two in the setup.

What am I missing here?  It's simple I'm sure but I'm missing it.

Dale

:-)  :-)

P. S.  hey, I got it all created, copied and all so it was a start. lol

--
I am only responsible for what I said ... Not for what you understood or how 
you interpreted my words!


Reply via email to