On Wed, 03 Aug 2005 21:02:32 -0400
"C.Beamer" <[EMAIL PROTECTED]> wrote:
Welcome to the fun.
> After attempting to connect to the xserver, I got my shell prompt back
> again with the following printed on the screen:
>
> New driver is "i810"
> (==)Using default built in configuration
> (EE) open /dev/fb0: No such device --> I have no idea what this means
> (EE) GARTinit: Unable to open /dev/agpgart (no such file or directory)
> (EE)I810(0) AGPGART support is not available. Make sure your kernel has
> agpgart support or that the agpgart kernel module is loaded
> (EE)Screens found, but non have useable configuration
> Fatal server error:
> no screens found
> i
/dev/fb0 is the framebuffer. No need to worry about that if using X.
But if
running a splash screen, then it needs to be defined in the kernel.
There is
a how-to on gentoo-wiki.org explaining how to setup the system and
kernel.
The other, you'll need to re-config your kernel to include -
Device Drivers -->
I2C Support -->
<M> I2C support
<*> I2C device interface
I2C Hardware Bus Support -->
<M > Intel 810/815
And -
Device Drivers -->
Character Devices -->
Intel 440LX/BX/GX, I8xx and E7x05 chipset support
The above should get you graphics, or at least closer. I don't have your
setup, so
I'm doing a best guess on the above.
Bob
-
--
gentoo-user@gentoo.org mailing list
