You actually switched the files of the PC's. The "--listen " arg should have the IP of the LOCAL PC, the one you'll listen IN, not the one you'll listen FROM. That's why you get the errors, you're trying to bind to an IP that's not the IP fo the local machine. Switch the files and it should work.
On a side note, I'd increase the "-j2" MAKEOPTS, to something like 5. If I'm not mistaken, that's what I use at home, on a similar config, based on what the HOWTO advised... Hope that helps, On 6/2/05, askar ... <[EMAIL PROTECTED]> wrote: > Recently knew about distcc, though I used to see the name a lot. > I likd the idea of distributed complilation. > I have 2 PCs and both have gentoo installed. > To use distcc I followed instruction at > http://www.gentoo.org/doc/en/distcc.xml. > My distcc related settings for PCs as follows > > 1st PC ip address 192.168.0.1 > 2nd PC ip address 192.168.0.249 > > 1) make.conf for both PCs: > ---------------------------------------- > MAKEOPTS="-j2" > > FEATURES="distcc" > ---------------------------------------- > > > 2) /etc/conf.d/distcc > > 1st PC: > ----------- > DISTCCD_OPTS="" > > # this is the distccd executable > DISTCCD_EXEC=/usr/bin/distccd > > # this is where distccd will store its pid file > DISTCCD_PIDFILE=/var/run/distccd/distccd.pid > > # set this option to run distccd with extra parameters > # Default port is 3632. For most people the default is okay. > DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632" > > DISTCCD_OPTS="${DISTCCD_OPTS} --log-level warning --log-file" > > DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.0.0/24 --listen 192.168.0.249" > > DISTCCD_NICE="15" > > ------------------ > > 2nd PCs /etc/conf.d/distcc: > > ----------------------- > DISTCCD_OPTS="" > > # this is the distccd executable > DISTCCD_EXEC=/usr/bin/distccd > > # this is where distccd will store its pid file > DISTCCD_PIDFILE=/var/run/distccd/distccd.pid > > # set this option to run distccd with extra parameters > # Default port is 3632. For most people the default is okay. > DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632" > > DISTCCD_OPTS="${DISTCCD_OPTS} --log-level warning --log-file" > > DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.0.0/24 --listen 192.168.0.1" > > DISTCCD_NICE="15" > ------------ > > 3) /etc/distcc/hosts: > > 1st PC: localhost 192.168.0.249 #1st PC's ip adress 192.168.0.1 > 2nd PC: localhost 192.168.0.1 #2nd PC's ip address 192.168.0.249 > > 4) On 1st PC iptables running > > 5) on both PCs sshd running > > 6) when I do on any PC '/etc/init.d/distcc start' I receive error: > distccd[9294] (dcc_setup_real_log) ERROR: failed to open --allow: > Permission denied > > 7) /var/log/messages on 1st PC says: > Jun 2 14:22:00 tux distccd[9294]: (dcc_listen_by_addr) ERROR: bind of > 192.168.0.249:3632 failed: Cannot assign requested address > > Please help. > > askar > > -- > gentoo-user@gentoo.org mailing list > > -- Rafael Dantas de Castro Engenharia de Computação 2001 - Unicamp - Laboratório de Criptografia Aplicada "Se procurar bem você acaba encontrando. Não a explicação (duvidosa) da vida, Mas a poesia (inexplicável) da vida." Carlos Drummond de Andrade -- gentoo-user@gentoo.org mailing list
