On Tue, 2005-04-19 at 15:33 +1200, Nick Rout wrote:
> although you say you are using only eth0 OR eth1, it looks like you are
> using both, even when the LAN connection is not plugged in.
> 
> when on wireless try /etc/init.d/net.eth0 stop

Can you also look at your /etc/conf.d/net file and determine if you've
specified a default Gateway?

You might need to omit that and it'll work. Since DHCP will put the
default GW automatically it isn't needed unless you're on static IP.


> 
> and see if that fixes it.
> 
> If that is the problem we should then look for a more permanent
> solution.
> 
> On Mon, 18 Apr 2005 22:20:50 +0000
> Lingyun Yang wrote:
> 
> > Hi all,
> > 
> >     I met a problem when I reboot from using eth1(wireless) to eth0,
> > I can't connect to internet,  and after I delete one of the default route
> > it works, restart eth0 doesn't work for me.
> > 
> > My home network:
> > 
> >   notebook   ---- eth0 ----->Switch --->Gentoo(Iptables)---cable
> > modem--> Internet
> >         |                                         |
> >         |____> eth1----->wireless router
> > 
> > 
> >   I don't know how the route table comes out:
> > 
> > when I can't connect, I typed route:
> > 
> > walnut ~ # route
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use 
> > Iface
> > 192.168.2.0     *               255.255.255.0   U     0      0        0 eth1
> > 192.168.0.0     *               255.255.255.0   U     0      0        0 eth0
> > loopback        localhost       255.0.0.0       UG    0      0        0 lo
> > default         192.168.0.1     0.0.0.0         UG    0      0        0 eth0
> > default         192.168.2.1     0.0.0.0         UG    0      0        0 eth1
> > 
> > Is it normal ?
> > 
> > These problem also makes my mozilla starts very slow.
> > 
> > 
> > My question is How to make /etc/init.d/net.eth* clear every thing
> > doesn't use any cache like things,
> > 
> > by the way, my eth1 starting script is a soft link to eth0
> > 
> > 
> > Thank you!
> > 
> > Lingyun
> > 
> > -- 
> > gentoo-user@gentoo.org mailing list
> 
> -- 
> Nick Rout
> Barrister & Solicitor
> Christchurch
> <http://www.rout.co.nz>
> <[EMAIL PROTECTED]>
> 

-- 
Ow Mun Heng
Gentoo/Linux on DELL D600 1.4Ghz 
98% Microsoft(tm) Free!! 
Neuromancer 11:56:57 up 20:32, 4 users, load average: 0.37, 0.64, 0.57 


-- 
gentoo-user@gentoo.org mailing list

Reply via email to