On Sat, Jun 04, 2022 at 16:46:33 -0400, Ionen Wolkens wrote:
> Signed-off-by: Ionen Wolkens <io...@gentoo.org>
> ---
> eclass/esed.eclass | 265 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 265 insertions(+)
> create mode 100644 eclass/esed.eclass
>
> diff --git a/eclass/esed.eclass b/eclass/esed.eclass
> new file mode 100644
> index 00000000000..414daceaf8b
> --- /dev/null
> +++ b/eclass/esed.eclass
> @@ -0,0 +1,265 @@
> +# Copyright 2022 Gentoo Authors
> +# Distributed under the terms of the GNU General Public License v2
> +
> +# @ECLASS: esed.eclass
> +# @MAINTAINER:
> +# Ionen Wolkens <io...@gentoo.org>
> +# @AUTHOR:
> +# Ionen Wolkens <io...@gentoo.org>
> +# @SUPPORTED_EAPIS: 8
> +# @BLURB: sed(1) and alike wrappers that die if did not modify any files
> +# @EXAMPLE:
> +#
> +# @CODE
> +# # sed(1) wrappers, die if no changes
> +# esed s/a/b/ file.c # -i is default
> +# enewsed s/a/b/ project.pc.in "${T}"/project.pc
> +#
> +# # bash-only simple fixed string alternatives, also die if no changes
> +# erepl string replace file.c
> +# ereplp ^match string replace file.c # like /^match/s:string:replace:g
> +# erepld ^match file.c # deletes matching lines, like /^match/d
> +# use prefix && enewreplp ^prefix= /usr "${EPREFIX}"/usr pn.pc.in pn.pc
> +#
> +# # find(1) wrapper that sees shell functions, dies if no files found
> +# efind . -name '*.c' -erun esed s/a/b/ # dies if no files changed
> +# efind . -name '*.c' -erun sed s/a/b/ # only dies if no files found
> +# @CODE
> +#
> +# Migration notes: be wary of non-deterministic cases involving variables,
> +# e.g. s|lib|$(get_libdir)|, s|-O3|${CFLAGS}|, or s|/usr|${EPREFIX}/usr|.
> +# erepl/esed() die if these do nothing, like libdir being 'lib' on x86.
> +# Either verify, keep sed(1), or ensure a change (extra space, @libdir@).
> +#
> +# Where possible, it is also good to consider if using patches is more
> +# suitable to ensure adequate changes. These functions are also unsafe
> +# for binary files containing null bytes (erepl() will remove them).
Some way to test for NULL in the file before reading might be useful.
Possibly die if found? Although right now I can't think of a super
elegant and/or efficient way to do so without writing a simple external
helper.
> +
> +case ${EAPI} in
> + 8) ;;
> + *) die "${ECLASS}: EAPI ${EAPI:-0} not supported" ;;
> +esac
> +
> +if [[ ! ${_ESED_ECLASS} ]]; then
> +_ESED_ECLASS=1
> +
> +# @ECLASS_VARIABLE: ESED_VERBOSE
> +# @DEFAULT_UNSET
> +# @USER_VARIABLE
> +# @DESCRIPTION:
> +# If set to a non-empty value, erepl/esed() and wrappers will use diff(1)
> +# to display file differences. Recommended for maintainers to easily
> +# confirm the changes being made.
> +
> +# @FUNCTION: esed
> +# @USAGE: [-E|-r|-n] [-e <expression>]... [--] <file>...
> +# @DESCRIPTION:
> +# sed(1) wrapper that dies if any of the expressions did not modify any
> files.
> +# sed's -i/--in-place is forced, -e can be omitted if only one expression,
> and
> +# arguments must be passed in the listed order with files last. Each -e will
> +# be a separate sed(1) call to evaluate changes of each.
> +esed() {
> + (( ${#} >= 2 )) || die "too few arguments for
> ${_esed_cmd[0]:-${FUNCNAME[0]}}"
> +
> + local endopts=false args=() contents=() exps=() files=()
> + local -i i
> + for ((i=1; i<=${#}; i++)); do
> + if [[ ${!i} =~ ^- ]] && ! ${endopts}; then
> + case ${!i} in
> + --) endopts=true ;;
> + -E|-n|-r) args+=( ${!i} ) ;;
> + -e)
> + i+=1
> + [[ ${!i} ]] || die "missing argument to
> -e"
> + exps+=( "${!i}" )
> + ;;
> + *) die "unrecognized option for ${FUNCNAME[0]}"
> ;;
> + esac
> + elif (( ! ${#exps[@]} )); then
> + exps+=( "${!i}" ) # like sed, if no -e, first
> non-option is exp
> + else
> + [[ -f ${!i} ]] || die "not a file: ${!i}"
Somewhere here might be a good place for the hypothetical:
null_free ${!i} || die "file ${!i} contains NULL bytes"
> + files+=( "${!i}" )
> + contents+=( "$(<"${!i}")" ) || die "failed reading:
> ${!i}"
> + fi
> + done
> + (( ${#files[@]} )) || die "no files in ${FUNCNAME[0]} arguments"
> +
> + if [[ ${_esed_output} ]]; then
> + (( ${#files[@]} == 1 )) || die "${_esed_cmd[0]} needs exactly
> one input file"
> +
> + # swap file for output to simplify sequential sed'ing
> + cp -- "${files[0]}" "${_esed_output}" || die
> + files[0]=${_esed_output}
> + fi
> +
> + local changed exp newcontents sed
> + for exp in "${exps[@]}"; do
> + sed=( sed -i "${args[@]}" -e "${exp}" -- "${files[@]}" )
> + [[ ${ESED_VERBOSE} ]] && einfo "${sed[*]}"
> +
> + "${sed[@]}" </dev/null || die "failed: ${sed[*]}"
> +
> + changed=false
> + for ((i=0; i<${#files[@]}; i++)); do
> + newcontents=$(<"${files[i]}") || die "failed reading:
> ${files[i]}"
> +
> + if [[ ${contents[i]} != "${newcontents}" ]]; then
> + changed=true
> +
> + [[ ${ESED_VERBOSE} ]] || break
> +
> + diff -u --color --label="${files[i]}"{,} \
> + <(echo "${contents[i]}") <(echo
> "${newcontents}")
> + fi
> + done
> +
> + ${changed} \
> + || die "no-op: ${FUNCNAME[0]} ${*}${_esed_cmd[0]:+
> (from: ${_esed_cmd[*]})}"
> + done
> +}
> +
> +# @FUNCTION: enewsed
> +# @USAGE: <esed-argument>... <output-file>
> +# @DESCRIPTION:
> +# esed() wrapper to save the result to <output-file>. Intended to replace
> +# ``sed ... input > output`` given esed() does not support stdin/out.
> +enewsed() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + local _esed_output=${*: -1:1}
> + esed "${@:1:${#}-1}"
> +}
> +
> +# @FUNCTION: erepl
> +# @USAGE: <string> <replacement> <file>...
> +# @DESCRIPTION:
> +# Do basic bash-only ``${<file>//"<string>"/<replacement>}`` per-line
> +# replacement in files(s). Dies if no changes were made. Suggested over
> +# sed(1) where possible for simplicity and avoiding issues with delimiters.
> +# Warning: erepl-based functions strip null bytes, use for text only.
> +erepl() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + ereplp '.*' "${@}"
> +}
> +
> +# @FUNCTION: enewrepl
> +# @USAGE: <erepl-argument>... <output-file>
> +# @DESCRIPTION:
> +# erepl() wrapper to save the result to <output-file>.
> +enewrepl() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + local _esed_output=${*: -1:1}
> + ereplp '.*' "${@:1:${#}-1}"
> +}
> +
> +# @FUNCTION: erepld
> +# @USAGE: <line-pattern-match> <file>...
> +# @DESCRIPTION:
> +# Deletes lines in file(s) matching ``[[ ${line} =~ <pattern> ]]``.
> +erepld() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + local _esed_repld=1
> + ereplp "${@}"
> +}
> +
> +# @FUNCTION: enewrepld
> +# @USAGE: <erepld-argument>... <output-file>
> +# @DESCRIPTION:
> +# erepl() wrapper to save the result to <output-file>.
> +enewrepld() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + local _esed_output=${*: -1:1}
> + erepld "${@:1:${#}-1}"
> +}
> +
> +# @FUNCTION: ereplp
> +# @USAGE: <line-match-pattern> <string> <replacement> <file>...
> +# @DESCRIPTION:
> +# Like erepl() but replaces only on ``[[ ${line} =~ <pattern> ]]``.
> +ereplp() {
> + local -i argsmin=$(( ${_esed_repld:-0}==1?2:4 ))
> + (( ${#} >= argsmin )) \
> + || die "too few arguments for ${_esed_cmd[0]:-${FUNCNAME[0]}}"
> +
> + [[ ! ${_esed_output} || ${#} -le ${argsmin} ]] \
> + || die "${_esed_cmd[0]} needs exactly one input file"
> +
> + local contents changed=false file line newcontents
> + for file in "${@:argsmin}"; do
A good place to put the test might be here:
null_free ${file} || die "file ${file} contains NULL bytes"
> + mapfile contents < "${file}" || die
> + newcontents=()
> +
> + for line in "${contents[@]}"; do
> + if [[ ${line} =~ ${1} ]]; then
> + if [[ ${_esed_repld} == 1 ]]; then
> + changed=true
> + else
> + newcontents+=( "${line//"${2}"/${3}}" )
> + [[ ${line} != "${newcontents[-1]}" ]]
> && changed=true
> + fi
> + else
> + newcontents+=( "${line}" )
> + fi
> + done
> + printf %s "${newcontents[@]}" > "${_esed_output:-${file}}" ||
> die
> +
> + if [[ ${ESED_VERBOSE} ]]; then
> + einfo "${FUNCNAME[0]} ${*:1:argsmin-1} ${file}
> ${_esed_output:+(to ${_esed_output})}"
> + diff -u --color --label="${file}"
> --label="${_esed_output:-${file}}" \
> + <(printf %s "${contents[@]}") <(printf %s
> "${newcontents[@]}")
> + fi
> + done
> +
> + ${changed} || die "no-op: ${_esed_cmd[*]:-${FUNCNAME[0]} ${*}}"
> +}
> +
> +# @FUNCTION: enewreplp
> +# @USAGE: <ereplp-argument>... <output-file>
> +# @DESCRIPTION:
> +# ereplp() wrapper to save the result to <output-file>.
> +enewreplp() {
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> + local _esed_output=${*: -1:1}
> + ereplp "${@:1:${#}-1}"
> +}
> +
> +# @FUNCTION: efind
> +# @USAGE: <find-argument>... -erun <command> <argument>...
> +# @DESCRIPTION:
> +# find(1) wrapper that dies if no files were found. <command> can be a shell
> +# function, e.g. ``efind ... -erun erepl /usr /opt``. -print0 is added to
> +# find arguments, and found files to end of arguments (``{} +`` is unused).
> +# Found files must not exceed args limits. Use is discouraged if files add
> +# up to a large total size (50+MB), notably with slower erepl/esed(). Shell
> +# functions called this way are expected to ``|| die`` themselves on error.
> +efind() {
> + (( ${#} >= 3 )) || die "too few arguments for ${FUNCNAME[0]}"
> +
> + local _esed_cmd=( ${FUNCNAME[0]} "${@}" )
> +
> + local find=( find )
> + while (( ${#} )); do
> + if [[ ${1} =~ -erun ]]; then
> + shift
> + break
> + fi
> + find+=( "${1}" )
> + shift
> + done
> + find+=( -print0 )
> +
> + local files
> + mapfile -d '' -t files < <("${find[@]}" || die "failed: ${find[*]}")
> +
> + (( ${#files[@]} )) || die "no files from: ${find[*]}"
> + (( ${#} )) || die "missing -erun arguments for ${FUNCNAME[0]}"
> +
> + # skip `|| die` for shell functions (should be handled internally)
> + if declare -f "${1}" >/dev/null; then
> + "${@}" "${files[@]}"
> + else
> + "${@}" "${files[@]}" || die "failed: ${*} ${files[*]}"
> + fi
> +}
> +
> +fi
> --
> 2.35.1
>
>
- Oskari
signature.asc
Description: PGP signature
