Thanks. 

On 4/28/20, 2:33 AM, "Balázs Varga A" <balazs.a.va...@ericsson.com> wrote:

    Hi Tim,
    Thanks for the explicit suggestions, I agree that makes text clearer.
    I will update the draft accordingly in the suggested format.
    Cheers
    Bala'zs

    -----Original Message-----
    From: Tim Evens (tievens) <tiev...@cisco.com> 
    Sent: Tuesday, April 28, 2020 1:48 AM
    To: Balázs Varga A <balazs.a.va...@ericsson.com>; gen-art@ietf.org
    Cc: draft-ietf-detnet-ip-over-mpls....@ietf.org; det...@ietf.org; 
last-c...@ietf.org
    Subject: Re: Genart last call review of draft-ietf-detnet-ip-over-mpls-05

    Hi Bala'zs, 

    For the most part, great.   See comments inline marked [tievens]...


    On 4/27/20, 7:22 AM, "Balázs Varga A" <mailto:balazs.a.va...@ericsson.com> 
wrote:

    Hi Tim,
    Thanks for the review. Your comments will be incorporated in the next 
version.
    Feedbacks are inline below marked with <BV>.
    Many thanks
    Bala'zs

    -----Original Message-----
    Subject: Genart last call review of draft-ietf-detnet-ip-over-mpls-05

    Reviewer: Tim Evens
    Review result: Ready with Nits

    ... 

    In Section 4.2:

    * There is reference to section 5.1.1 and 5.1.2, but those sections do not 
exist in this draft.  Can you clarify which draft/RFC these sections are 
referring to? 
    <BV> Right, they are referring to 
"https://datatracker.ietf.org/doc/draft-ietf-detnet-ip/";. Reference is at the 
end of the sentence. 
      "   ...   IP" and "NProto" indicate the fields described in
       Section 5.1.1.  IP Header Information and Section 5.1.2.  Other
       Protocol Header Information in [I-D.ietf-detnet-ip], respectively.

    [tievens] The reference is assumed instead of being direct, such as "as 
defined in Section 5.1.1 of [<draft>]"

    * "Per [I-D.ietf-detnet-mpls], the DetNet MPLS data plane uses a single
       S-Label to support a single app flow.  Section 5.1.  DetNet IP Flow
       Identification Procedures ..."  

       Why is Section 5.1 referenced like this?
    <BV> Again, this is referring to 
"https://datatracker.ietf.org/doc/draft-ietf-detnet-ip/";.

    [tievens] the callout here is that this type of reference is on the side of 
being terse, not succinct and clear as to which document this section is 
belongs. Would it not be more succinct and clear as:

      "Per Section 5.1 of [I-D.ietf-detnet-mpls], the DetNet MPLS data plane 
uses a single
         S-Label to support a single app flow. DetNet IP Flow
         Identification Procedures in Section 4.4 of [I-D.ietf-detnet-ip] 
states that a
         single DetNet flow is identified based on IP, and next level
         protocol, header information."
    ?

    * "DetNet IP Flow Identification Procedures in [I-D.ietf-detnet-ip] states
       that a single DetNet flow is identified based on IP, and next level
       protocol, header information.  Section 4.4.  Aggregation..."  

       It would be more clear to specifically refer to the draft/rfc and 
section.
    <BV> Again, this is referring to 
"https://datatracker.ietf.org/doc/draft-ietf-detnet-ip/";.

    [tievens] IMO, this would benefit from being more clear as stated above.  
It doesn't add much verbosity to add "<section> of [<draft/rfc>].




_______________________________________________
Gen-art mailing list
Gen-art@ietf.org
https://www.ietf.org/mailman/listinfo/gen-art

Reply via email to