Hi Mohammad,

Yes this works. I can now ping the server from client and vice versa as well.

Thank you for the help.

Regards
Yasir

From: gem5-users [mailto:[email protected]] On Behalf Of Mohammad 
Alian
Sent: 22 November 2016 21:28
To: gem5 users mailing list <[email protected]>
Subject: Re: [gem5-users] Dist-GEM5 Simulation with Two nodes - Ethernet Link 
Issue

Hi Yasir,

Can you try:

Server:
/sbin/ifconfig eth0 hw ether 00:90:00:00:00:01
/sbin/ifconfig eth0 10.0.0.2 netmask 255.255.255.0 up

Client:
/sbin/ifconfig eth0 hw ether 00:90:00:00:00:02
/sbin/ifconfig eth0 10.0.0.3 netmask 255.255.255.0 up


And then try to ping?


Best,
Mohammad

On Tue, Nov 22, 2016 at 6:26 AM, Qureshi Yasir Mahmood 
<[email protected]<mailto:[email protected]>> wrote:
Hi,

I am running a Dist GEM-5 simualtion with two nodes, one as server and the 
other as client. I also have a switch in between them.

I have an etherlink (DistEtherLink) between them. The problem is that I can’t 
ping the server from the client side and vice-versa. So there is no 
communication between both nodes. Any ideas why is this so ? I use the 
following command to launch the simulation

bash $DIST_M5/util/dist/gem5-dist.sh  -n 2 -r $DIST_M5/rundir -c 
$DIST_M5/ckptdir  -s $DIST_M5/configs/dist/sw.py  -f 
$DIST_M5/configs/example/fs.py --fs-args --kernel=$M5_PATH/binaries/vmlinux 
--machine-type=VExpress_GEM5_V1 
--dtb-file=/home/yqureshi/gem5/system/arm/dt/armv8_gem5_v1_1cpu.dtb 
--disk-image=$M5_PATH/disks/websearch_srv_clt.img --cpu-clock=2GHz 
--mem-type=DDR4_2400_x64 --mem-ranks=4 --mem-size=16GB --sys-clock=1600MHz 
--num-cpus=2 --cf-args --ethernet-linkdelay=10us --ethernet-linkspeed=10Gbps -x 
$DIST_M5/build/ARM/gem5.fast

To configure the IP addresses, I run the following on server and client sides

On Server:
ifconfig enp0s1 172.19.0.2 netmask 255.255.255.0
route add default gw 172.19.0.3 enp0s1

On client:
ifconfig enp0s1 172.19.0.3 netmask 255.255.255.0
route add default gw 172.19.0.2 enp0s1


Regards
Yasir Mahmood


_______________________________________________
gem5-users mailing list
[email protected]<mailto:[email protected]>
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to