> 6/6 is doable if you slightly cheat the size of the solder pads. The problem is the vias - a 12 mil hole with 6 mil rules is a 24 mil via pad, with only 39 mil on center (1mm) that leaves 15 mil between vias, which is enough for a 5/5 trace but not a 6/6 trace.
So with 6/6 rules, you're limited to the outer THREE rows, not the outer FOUR. Unless there's some trick for staggering the vias to make more room? _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
