Hi,
ACATS results for (4.5.0 20091012 r152668) for
MIPS, SPARC, PowerPC, x86 and m68k/Coldfire. This is
the first time I have results for m68k/Coldfire. :)
+ ARM - does not build, regression, PR40775
+ General Failures
c380004 fails on all RTEMS targets. It requires
a very large stack to pass.
c34006g fails on mips, powerpc, sparc, and m68k.
It passes on x86. This is a failure detected by
the test itself "INCORRECT SELECTION (ASSIGNMENT)".
c953002 fails on x86 and SPARC. It runs too long and
has to be killed with partial output.
+ MIPS - 3 failures, 1 unique. c760002. Run ends
with a lot of these messages from jmr3904 simulator:
HILO: MFHI: MF at 0x8803f6c8 following OP at 0x8800858c corrupted by MT
at 0x880085ac
+ PowerPC: 2 failures, 0 unique to this target.
+ SPARC: 4 failures, 1 target unique.
c87b39a - error detected
raised CONSTRAINT_ERROR : c87b39a.adb:93 discriminant check failed
+ x86 - 19 failures, 17 target unique.
Qemu seems to have FPU precision issues. 17 FP tests fail
with precision messages. They run on real hardware.
+ m68k/coldfire - 24 failures, 21 target unique.
13 are csx5aXX or cxg20XX tests which are likely the same qemu FPU
precision issue as found on the x86.
c85006a - partial output, runs too long
c97205b, c97305c
raised CONSTRAINT_ERROR : report.adb:109 range check failed
c974001, c974013
Abortable part did not execute.
cxb3004 cxb3013
die with stack trace
--
Joel Sherrill, Ph.D. Director of Research & Development
joel.sherr...@oarcorp.com On-Line Applications Research
Ask me about RTEMS: a free RTOS Huntsville AL 35805
Support Available (256) 722-9985
